devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>, <sre@kernel.org>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5
Date: Wed, 16 Dec 2020 14:57:33 +0200	[thread overview]
Message-ID: <1608123453-1423-4-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1608123453-1423-1-git-send-email-claudiu.beznea@microchip.com>

Add support for SAMA7G5 by adding proper struct reg_config structure
and since SAMA7G5 is not currently on LPDDR setups the commit also
avoid the mapping of DDR controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++++++++--------
 1 file changed, 54 insertions(+), 18 deletions(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 3996167f676f..a3342c8c3728 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -78,9 +78,15 @@ struct pmc_reg_config {
 	u8 mckr;
 };
 
+struct ddrc_reg_config {
+	u32 type_offset;
+	u32 type_mask;
+};
+
 struct reg_config {
 	struct shdwc_reg_config shdwc;
 	struct pmc_reg_config pmc;
+	struct ddrc_reg_config ddrc;
 };
 
 struct shdwc {
@@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
 	.pmc = {
 		.mckr		= 0x30,
 	},
+	.ddrc = {
+		.type_offset	= AT91_DDRSDRC_MDR,
+		.type_mask	= AT91_DDRSDRC_MD
+	},
 };
 
 static const struct reg_config sam9x60_reg_config = {
@@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
 	.pmc = {
 		.mckr		= 0x28,
 	},
+	.ddrc = {
+		.type_offset	= AT91_DDRSDRC_MDR,
+		.type_mask	= AT91_DDRSDRC_MD
+	},
+};
+
+static const struct reg_config sama7g5_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift = 16,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = 4,
+	},
+	.pmc = {
+		.mckr		= 0x28,
+	},
 };
 
 static const struct of_device_id at91_shdwc_of_match[] = {
@@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
 	{
 		.compatible = "microchip,sam9x60-shdwc",
 		.data = &sam9x60_reg_config,
+	},
+	{
+		.compatible = "microchip,sama7g5-shdwc",
+		.data = &sama7g5_reg_config,
 	}, {
 		/*sentinel*/
 	}
@@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
 static const struct of_device_id at91_pmc_ids[] = {
 	{ .compatible = "atmel,sama5d2-pmc" },
 	{ .compatible = "microchip,sam9x60-pmc" },
+	{ .compatible = "microchip,sama7g5-pmc" },
 	{ /* Sentinel. */ }
 };
 
@@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 		goto clk_disable;
 	}
 
-	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
-	if (!np) {
-		ret = -ENODEV;
-		goto unmap;
-	}
+	if (at91_shdwc->rcfg->ddrc.type_mask) {
+		np = of_find_compatible_node(NULL, NULL,
+					     "atmel,sama5d3-ddramc");
+		if (!np) {
+			ret = -ENODEV;
+			goto unmap;
+		}
 
-	at91_shdwc->mpddrc_base = of_iomap(np, 0);
-	of_node_put(np);
+		at91_shdwc->mpddrc_base = of_iomap(np, 0);
+		of_node_put(np);
 
-	if (!at91_shdwc->mpddrc_base) {
-		ret = -ENOMEM;
-		goto unmap;
+		if (!at91_shdwc->mpddrc_base) {
+			ret = -ENOMEM;
+			goto unmap;
+		}
+
+		ddr_type = readl(at91_shdwc->mpddrc_base +
+				 at91_shdwc->rcfg->ddrc.type_offset) &
+				 at91_shdwc->rcfg->ddrc.type_mask;
+		if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
+		    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
+			iounmap(at91_shdwc->mpddrc_base);
+			at91_shdwc->mpddrc_base = NULL;
+		}
 	}
 
 	pm_power_off = at91_poweroff;
 
-	ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
-			 AT91_DDRSDRC_MD;
-	if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
-	    ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
-		iounmap(at91_shdwc->mpddrc_base);
-		at91_shdwc->mpddrc_base = NULL;
-	}
-
 	return 0;
 
 unmap:
-- 
2.7.4


  parent reply	other threads:[~2020-12-16 12:59 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-16 12:57 [PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5 Claudiu Beznea
2020-12-16 12:57 ` [PATCH 1/3] power: reset: at91-sama5d2_shdwc: fix wkupdbc mask Claudiu Beznea
2020-12-16 13:40   ` Alexandre Belloni
2020-12-16 12:57 ` [PATCH 2/3] dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc Claudiu Beznea
2020-12-16 13:41   ` Alexandre Belloni
2020-12-21 19:37     ` Rob Herring
2020-12-21 19:37   ` Rob Herring
2020-12-16 12:57 ` Claudiu Beznea [this message]
2020-12-16 13:45   ` [PATCH 3/3] power: reset: at91-sama5d2_shdwc: add support for sama7g5 Alexandre Belloni
2020-12-16 14:11     ` Claudiu.Beznea
2020-12-16 14:12     ` Claudiu.Beznea
2021-01-16 13:58 ` [PATCH 0/3] power: reset: at91-sama5d2_shdwc: add support for SAMA7G5 Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1608123453-1423-4-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=mark.rutland@arm.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).