Re: [PATCH v2 1/2] dt-bindings/phy: ingenic: Add compatibles for JZ4760(B) SoCs

[Rob Herring <robh@kernel.org>]

On Sat, 23 Jan 2021 14:18:24 +0000, Paul Cercueil wrote:
> Add the ingenic,jz4760-phy and ingenic,jz4760b-phy compatible strings,
> and make the ingenic,jz4770-phy compatible string require
> ingenic,jz4760-phy as a fallback, since both work the same, and the
> JZ4760 SoC is older.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
> 
> Notes:
>     v2: Fix indentation
> 
>  .../bindings/phy/ingenic,phy-usb.yaml         | 22 ++++++++++++-------
>  1 file changed, 14 insertions(+), 8 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/ingenic,cgu.example.dt.yaml: clock-controller@10000000: usb-phy@3c:compatible: 'oneOf' conditional failed, one must be fixed:
	['ingenic,jz4770-phy'] is too short
	'ingenic,jz4770-phy' is not one of ['ingenic,jz4760-phy', 'ingenic,jz4775-phy', 'ingenic,jz4780-phy', 'ingenic,x1000-phy', 'ingenic,x1830-phy', 'ingenic,x2000-phy']
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/ingenic,cgu.example.dt.yaml: usb-phy@3c: compatible: 'oneOf' conditional failed, one must be fixed:
	['ingenic,jz4770-phy'] is too short
	'ingenic,jz4770-phy' is not one of ['ingenic,jz4760-phy', 'ingenic,jz4775-phy', 'ingenic,jz4780-phy', 'ingenic,x1000-phy', 'ingenic,x1830-phy', 'ingenic,x2000-phy']
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/ingenic,phy-usb.yaml

See https://patchwork.ozlabs.org/patch/1430732

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.