devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <stefanc@marvell.com>
To: <netdev@vger.kernel.org>
Cc: <thomas.petazzoni@bootlin.com>, <davem@davemloft.net>,
	<nadavh@marvell.com>, <ymarkman@marvell.com>,
	<linux-kernel@vger.kernel.org>, <stefanc@marvell.com>,
	<kuba@kernel.org>, <linux@armlinux.org.uk>, <mw@semihalf.com>,
	<andrew@lunn.ch>, <rmk+kernel@armlinux.org.uk>,
	<atenart@kernel.org>, <devicetree@vger.kernel.org>,
	<robh+dt@kernel.org>, <sebastian.hesselbarth@gmail.com>,
	<gregory.clement@bootlin.com>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v11 net-next 08/15] net: mvpp2: add FCA RXQ non occupied descriptor threshold
Date: Tue, 9 Feb 2021 10:42:24 +0200	[thread overview]
Message-ID: <1612860151-12275-9-git-send-email-stefanc@marvell.com> (raw)
In-Reply-To: <1612860151-12275-1-git-send-email-stefanc@marvell.com>

From: Stefan Chulski <stefanc@marvell.com>

The firmware needs to monitor the RX Non-occupied descriptor
bits for flow control to move to XOFF mode.
These bits need to be unmasked to be functional, but they will
not raise interrupts as we leave the RX exception summary
bit in MVPP2_ISR_RX_TX_MASK_REG clear.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h      |  3 ++
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 44 ++++++++++++++++----
 2 files changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 9239d80..d2cc513c 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -295,6 +295,8 @@
 #define     MVPP2_PON_CAUSE_TXP_OCCUP_DESC_ALL_MASK	0x3fc00000
 #define     MVPP2_PON_CAUSE_MISC_SUM_MASK		BIT(31)
 #define MVPP2_ISR_MISC_CAUSE_REG		0x55b0
+#define MVPP2_ISR_RX_ERR_CAUSE_REG(port)	(0x5520 + 4 * (port))
+#define     MVPP2_ISR_RX_ERR_CAUSE_NONOCC_MASK	0x00ff
 
 /* Buffer Manager registers */
 #define MVPP2_BM_POOL_BASE_REG(pool)		(0x6000 + ((pool) * 4))
@@ -763,6 +765,7 @@
 /* MSS Flow control */
 #define FC_QUANTA		0xFFFF
 #define FC_CLK_DIVIDER		100
+#define MSS_THRESHOLD_STOP	768
 
 /* RX buffer constants */
 #define MVPP2_SKB_SHINFO_SIZE \
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 761f745..8b4073c 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1133,14 +1133,19 @@ static inline void mvpp2_qvec_interrupt_disable(struct mvpp2_queue_vector *qvec)
 static void mvpp2_interrupts_mask(void *arg)
 {
 	struct mvpp2_port *port = arg;
+	int cpu = smp_processor_id();
+	u32 thread;
 
 	/* If the thread isn't used, don't do anything */
-	if (smp_processor_id() > port->priv->nthreads)
+	if (cpu > port->priv->nthreads)
 		return;
 
-	mvpp2_thread_write(port->priv,
-			   mvpp2_cpu_to_thread(port->priv, smp_processor_id()),
+	thread = mvpp2_cpu_to_thread(port->priv, cpu);
+
+	mvpp2_thread_write(port->priv, thread,
 			   MVPP2_ISR_RX_TX_MASK_REG(port->id), 0);
+	mvpp2_thread_write(port->priv, thread,
+			   MVPP2_ISR_RX_ERR_CAUSE_REG(port->id), 0);
 }
 
 /* Unmask the current thread's Rx/Tx interrupts.
@@ -1150,20 +1155,25 @@ static void mvpp2_interrupts_mask(void *arg)
 static void mvpp2_interrupts_unmask(void *arg)
 {
 	struct mvpp2_port *port = arg;
-	u32 val;
+	int cpu = smp_processor_id();
+	u32 val, thread;
 
 	/* If the thread isn't used, don't do anything */
-	if (smp_processor_id() > port->priv->nthreads)
+	if (cpu > port->priv->nthreads)
 		return;
 
+	thread = mvpp2_cpu_to_thread(port->priv, cpu);
+
 	val = MVPP2_CAUSE_MISC_SUM_MASK |
 		MVPP2_CAUSE_RXQ_OCCUP_DESC_ALL_MASK(port->priv->hw_version);
 	if (port->has_tx_irqs)
 		val |= MVPP2_CAUSE_TXQ_OCCUP_DESC_ALL_MASK;
 
-	mvpp2_thread_write(port->priv,
-			   mvpp2_cpu_to_thread(port->priv, smp_processor_id()),
+	mvpp2_thread_write(port->priv, thread,
 			   MVPP2_ISR_RX_TX_MASK_REG(port->id), val);
+	mvpp2_thread_write(port->priv, thread,
+			   MVPP2_ISR_RX_ERR_CAUSE_REG(port->id),
+			   MVPP2_ISR_RX_ERR_CAUSE_NONOCC_MASK);
 }
 
 static void
@@ -1188,6 +1198,9 @@ static void mvpp2_interrupts_unmask(void *arg)
 
 		mvpp2_thread_write(port->priv, v->sw_thread_id,
 				   MVPP2_ISR_RX_TX_MASK_REG(port->id), val);
+		mvpp2_thread_write(port->priv, v->sw_thread_id,
+				   MVPP2_ISR_RX_ERR_CAUSE_REG(port->id),
+				   MVPP2_ISR_RX_ERR_CAUSE_NONOCC_MASK);
 	}
 }
 
@@ -2393,6 +2406,20 @@ static void mvpp2_txp_max_tx_size_set(struct mvpp2_port *port)
 	}
 }
 
+/* Set the number of non-occupied descriptors threshold */
+static void mvpp2_set_rxq_free_tresh(struct mvpp2_port *port,
+				     struct mvpp2_rx_queue *rxq)
+{
+	u32 val;
+
+	mvpp2_write(port->priv, MVPP2_RXQ_NUM_REG, rxq->id);
+
+	val = mvpp2_read(port->priv, MVPP2_RXQ_THRESH_REG);
+	val &= ~MVPP2_RXQ_NON_OCCUPIED_MASK;
+	val |= MSS_THRESHOLD_STOP << MVPP2_RXQ_NON_OCCUPIED_OFFSET;
+	mvpp2_write(port->priv, MVPP2_RXQ_THRESH_REG, val);
+}
+
 /* Set the number of packets that will be received before Rx interrupt
  * will be generated by HW.
  */
@@ -2648,6 +2675,9 @@ static int mvpp2_rxq_init(struct mvpp2_port *port,
 	mvpp2_rx_pkts_coal_set(port, rxq);
 	mvpp2_rx_time_coal_set(port, rxq);
 
+	/* Set the number of non occupied descriptors threshold */
+	mvpp2_set_rxq_free_tresh(port, rxq);
+
 	/* Add number of descriptors ready for receiving packets */
 	mvpp2_rxq_status_update(port, rxq->id, 0, rxq->size);
 
-- 
1.9.1


  parent reply	other threads:[~2021-02-09  8:48 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-09  8:42 [PATCH v11 net-next 00/15] net: mvpp2: Add TX Flow Control support stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 01/15] doc: marvell: add CM3 address space and PPv2.3 description stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 02/15] dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 03/15] net: mvpp2: add CM3 SRAM memory map stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 04/15] net: mvpp2: always compare hw-version vs MVPP21 stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 05/15] net: mvpp2: add PPv23 version definition stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 06/15] net: mvpp2: increase BM pool and RXQ size stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 07/15] net: mvpp2: add FCA periodic timer configurations stefanc
2021-02-09  8:42 ` stefanc [this message]
2021-02-09  8:42 ` [PATCH v11 net-next 09/15] net: mvpp2: enable global flow control stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 10/15] net: mvpp2: add RXQ flow control configurations stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 11/15] net: mvpp2: add ethtool flow control configuration support stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 12/15] net: mvpp2: add BM protection underrun feature support stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 13/15] net: mvpp2: add PPv23 RX FIFO flow control stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 14/15] net: mvpp2: set 802.3x GoP Flow Control mode stefanc
2021-02-09  8:42 ` [PATCH v11 net-next 15/15] net: mvpp2: add TX FC firmware check stefanc
2021-02-09 16:28   ` Russell King - ARM Linux admin
2021-02-10  9:05     ` [EXT] " Stefan Chulski
2021-02-09 11:40 ` [PATCH v11 net-next 00/15] net: mvpp2: Add TX Flow Control support Marcin Wojtas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1612860151-12275-9-git-send-email-stefanc@marvell.com \
    --to=stefanc@marvell.com \
    --cc=andrew@lunn.ch \
    --cc=atenart@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mw@semihalf.com \
    --cc=nadavh@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=rmk+kernel@armlinux.org.uk \
    --cc=robh+dt@kernel.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=ymarkman@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).