From: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
To: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
manivannan.sadhasivam@linaro.org, robh+dt@kernel.org,
sboyd@kernel.org, sricharan@codeaurora.org,
Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Subject: [PATCH v5] Add board support for HK10 board variants
Date: Fri, 26 Feb 2021 13:58:29 +0530 [thread overview]
Message-ID: <1614328110-28866-1-git-send-email-gokulsri@codeaurora.org> (raw)
Added support for HK10-C1 and HK10-C2 board variants based on IPQ8074 SoC.
Both these variants support dual QCN9000 PCIe cards that uses MHI communication
protocol over PCIe. In addition, HK10-C1 support on-chip radio.
Both these variants slightly differ in clock configuation for ethernet.
This series depends on below series:
[V2,0/7] Add PCIe support for IPQ8074
[v8,0/9] remoteproc: qcom: q6v5-wcss: Add support for secure pil
changes since v4:
- Addressed review comments.
- Addressing Kalle's comments, removed memory reservations in dts.
- Addressing Manivannan's comments, removed dts entry for mhi
changes since v3:
- Addressed build failure reported by test robot
in patch 3
changes since v2:
- In patch 3, Moved pcie0_rp and pcie1_rp nodes and
removed unused members and subnodes
Gokul Sriram Palanisamy (1):
arm64: dts: Add board support for HK10
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 11 ++++
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 14 +++++
arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 76 ++++++++++++++++++++++++++++
4 files changed, 103 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
--
2.7.4
next reply other threads:[~2021-02-26 8:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-26 8:28 Gokul Sriram Palanisamy [this message]
2021-02-26 8:28 ` [PATCH v5] arm64: dts: Add board support for HK10 Gokul Sriram Palanisamy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1614328110-28866-1-git-send-email-gokulsri@codeaurora.org \
--to=gokulsri@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sricharan@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).