From: dillon.minfei@gmail.com
To: robh+dt@kernel.org, mcoquelin.stm32@gmail.com,
alexandre.torgue@st.com, devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux@armlinux.org.uk,
vladimir.murzin@arm.com, afzal.mohd.ma@gmail.com
Cc: dillon min <dillon.minfei@gmail.com>
Subject: [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support
Date: Wed, 3 Mar 2021 16:05:09 +0800 [thread overview]
Message-ID: <1614758717-18223-1-git-send-email-dillon.minfei@gmail.com> (raw)
From: dillon min <dillon.minfei@gmail.com>
This patchset intend to add art-pi board support, this board developed
by rt-thread(https://www.rt-thread.org/).
Board resources:
8MiB QSPI flash
16MiB SPI flash
32MiB SDRAM
AP6212 wifi,bt,fm comb
sw context:
- as stm32h750 just has 128k bytes internal flash, so running a fw on
internal flash to download u-boot/kernel to qspi flash, boot
u-boot/kernel from qspi flash. this fw is based on rt-thread.
- kernel can be xip on qspi flash or load to sdram
- root filesystem is jffs2(created by buildroot), stored on spi flash
to support the boad, add following changes.
- fix r0-r3, r12 register restore failed after svc call,
- add dts binding
- update yaml doc
dillon min (8):
ARM: ARMv7-M: Fix register restore corrupt after svc call
Documentation: arm: stm32: Add stm32h750 value line
dt-bindings: arm: stm32: Add compatible strings for ART-PI board
dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x
ARM: dts: stm32: add stm32h750-pinctrl.dtsi
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
ARM: stm32: add initial support for stm32h750
Documentation/arm/index.rst | 1 +
Documentation/arm/stm32/stm32h750-overview.rst | 33 ++
.../devicetree/bindings/arm/stm32/stm32.yaml | 4 +
.../bindings/pinctrl/st,stm32-pinctrl.yaml | 1 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/stm32h7-pinctrl.dtsi | 392 +++++++++++++++++++++
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 307 +---------------
arch/arm/boot/dts/stm32h743.dtsi | 30 ++
arch/arm/boot/dts/stm32h750-pinctrl.dtsi | 11 +
arch/arm/boot/dts/stm32h750.dtsi | 5 +
arch/arm/boot/dts/stm32h750i-art-pi.dts | 227 ++++++++++++
arch/arm/mach-stm32/board-dt.c | 1 +
arch/arm/mm/proc-v7m.S | 5 +-
13 files changed, 716 insertions(+), 302 deletions(-)
create mode 100644 Documentation/arm/stm32/stm32h750-overview.rst
create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/stm32h750.dtsi
create mode 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts
--
2.7.4
next reply other threads:[~2021-03-03 19:11 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-03 8:05 dillon.minfei [this message]
2021-03-03 8:05 ` [PATCH 1/8] ARM: ARMv7-M: Fix register restore corrupt after svc call dillon.minfei
2021-03-03 9:52 ` Vladimir Murzin
2021-03-03 13:35 ` dillon min
2021-03-03 14:19 ` Vladimir Murzin
2021-03-04 5:42 ` dillon min
2021-03-04 9:02 ` Vladimir Murzin
2021-03-03 8:05 ` [PATCH 2/8] Documentation: arm: stm32: Add stm32h750 value line dillon.minfei
2021-03-03 8:05 ` [PATCH 3/8] dt-bindings: arm: stm32: Add compatible strings for ART-PI board dillon.minfei
2021-03-08 19:50 ` Rob Herring
2021-03-03 8:05 ` [PATCH 4/8] dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl dillon.minfei
2021-03-08 19:50 ` Rob Herring
2021-03-03 8:05 ` [PATCH 5/8] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x dillon.minfei
2021-03-11 10:40 ` Alexandre TORGUE
2021-03-11 12:23 ` dillon min
2021-03-11 12:54 ` [Linux-stm32] " Ahmad Fatoum
2021-03-11 13:03 ` dillon min
2021-03-11 13:30 ` Alexandre TORGUE
2021-03-11 14:32 ` dillon min
2021-03-11 14:50 ` Alexandre TORGUE
2021-03-03 8:05 ` [PATCH 6/8] ARM: dts: stm32: add stm32h750-pinctrl.dtsi dillon.minfei
2021-03-03 8:05 ` [PATCH 7/8] ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 dillon.minfei
2021-03-11 10:42 ` Alexandre TORGUE
2021-03-11 12:32 ` dillon min
2021-03-11 13:31 ` Alexandre TORGUE
2021-03-03 8:05 ` [PATCH 8/8] ARM: stm32: add initial support for stm32h750 dillon.minfei
2021-03-11 10:43 ` Alexandre TORGUE
2021-03-11 12:34 ` dillon min
2021-03-10 11:47 ` [PATCH 0/8] ARM: STM32: add art-pi(stm32h750xbh6) board support dillon min
2021-03-11 10:26 ` Alexandre TORGUE
2021-03-11 11:30 ` dillon min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1614758717-18223-1-git-send-email-dillon.minfei@gmail.com \
--to=dillon.minfei@gmail.com \
--cc=afzal.mohd.ma@gmail.com \
--cc=alexandre.torgue@st.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mcoquelin.stm32@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vladimir.murzin@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).