[PATCH v3 0/9] ARM: STM32: add art-pi(stm32h750xbh6) board support

[dillon.minfei@gmail.com]

From: dillon min <dillon.minfei@gmail.com>

This patchset intend to add art-pi board support, this board developed
by rt-thread(https://www.rt-thread.org/).

Board resources:

8MiB QSPI flash
16MiB SPI flash
32MiB SDRAM
AP6212 wifi,bt,fm comb

sw context:
- as stm32h750 just has 128k bytes internal flash, so running a fw on
  internal flash to download u-boot/kernel to qspi flash, boot
  u-boot/kernel from qspi flash. this fw is based on rt-thread.
- kernel can be xip on qspi flash or load to sdram
- root filesystem is jffs2(created by buildroot), stored on spi flash

to support the boad, add following changes.
- fix r0-r3, r12 register restore failed after svc call,
- add dts binding
- update yaml doc

changes in v3:
- fix dtbs_check warrning: (8002cbd78fd5 and 4bc21d3dd678)
  >> arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: pin-controller: {'type':
  'object'} is not allowed for {'#address-cells': [[1]], '#size-cells':
  [[1]], 'ranges': [[0,

  arch/arm/boot/dts/stm32h743i-eval.dt.yaml: soc: 'i2c@40005C00',
  'i2c@58001C00' do not match any of the regexes: '@(0|[1-9a-f][0-9a-f]*)$',
  '^[^@]+$', 'pinctrl-[0-9]+'

  >> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800: 'bluetooth'
  does not match any of the regexes: 'pinctrl-[0-9]+'

changes in v2:
- reorganize the pinctrl device tree about
  stm32h7-pinctrl/stm32h743/750-pinctrl
  stm32h7-pinctrl.dtsi --> stm32h743-pinctrl.dtsi --> stm32h743i-disco.dts
      	      	         |                          |-> stm32h743i-eval.dts
      	      	         |-> stm32h750-pinctrl.dtsi --> stm32h750i-art-pi.dts
  same to the stm32f7/f4's pinctrl style
- fix author name/copyright mistake
- add compatible string	st,stm32h750-pinctrl to pinctl-stm32h743.c as they
  have same pin alternate functions, update Kconfig description
- make item in stm32h750i-art-pi.dts sort by letter

dillon min (9):
  Documentation: arm: stm32: Add stm32h750 value line doc
  dt-bindings: arm: stm32: Add compatible strings for ART-PI board
  dt-bindings: pinctrl: stm32: Add stm32h750 pinctrl
  ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
  ARM: dts: stm32: add stm32h750-pinctrl.dtsi
  ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
  ARM: stm32: Add a new SOC - STM32H750
  pinctrl: stm32: Add STM32H750 MCU pinctrl support
  dt-bindings: serial: stm32: add phandle 'bluetooth' to fix dtbs_check
    warrning

 Documentation/arm/index.rst                        |   1 +
 Documentation/arm/stm32/stm32h750-overview.rst     |  33 +++
 .../devicetree/bindings/arm/stm32/stm32.yaml       |   4 +
 .../bindings/pinctrl/st,stm32-pinctrl.yaml         |   1 +
 .../devicetree/bindings/serial/st,stm32-uart.yaml  |   5 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/stm32h7-pinctrl.dtsi             | 273 ++++++++++++++++++
 arch/arm/boot/dts/stm32h743-pinctrl.dtsi           | 307 +--------------------
 arch/arm/boot/dts/stm32h743.dtsi                   | 153 +++++++++-
 arch/arm/boot/dts/stm32h750-pinctrl.dtsi           |  11 +
 arch/arm/boot/dts/stm32h750.dtsi                   |   5 +
 arch/arm/boot/dts/stm32h750i-art-pi.dts            | 228 +++++++++++++++
 arch/arm/mach-stm32/board-dt.c                     |   1 +
 drivers/pinctrl/stm32/Kconfig                      |   2 +-
 drivers/pinctrl/stm32/pinctrl-stm32h743.c          |   3 +
 15 files changed, 724 insertions(+), 304 deletions(-)
 create mode 100644 Documentation/arm/stm32/stm32h750-overview.rst
 create mode 100644 arch/arm/boot/dts/stm32h7-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/stm32h750-pinctrl.dtsi
 create mode 100644 arch/arm/boot/dts/stm32h750.dtsi
 create mode 100644 arch/arm/boot/dts/stm32h750i-art-pi.dts

-- 
1.9.1