From: Tomasz Figa <t.figa@samsung.com>
To: Rahul Sharma <rahul.sharma@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
kgene.kim@samsung.com, sw0312.kim@samsung.com,
inki.dae@samsung.com, tomasz.figa@gmail.com,
s.nawrocki@samsung.com, joshi@samsung.com, r.sh.open@gmail.com
Subject: Re: [PATCH v7 0/6] ARM: dts: add support for exynos hdmi subsystem
Date: Thu, 29 Aug 2013 15:35:49 +0200 [thread overview]
Message-ID: <1620695.hYygFk0Iax@amdc1227> (raw)
In-Reply-To: <1377784377-28426-1-git-send-email-rahul.sharma@samsung.com>
Hi Rahul,
On Thursday 29 of August 2013 19:22:51 Rahul Sharma wrote:
> It adds Device tree nodes and clocks information for HDMI subsystem
> for exynos5420 and exynos5250 SoCs. It adds pinctrl node for hdmi
> hpd gpio and update binding documents.
>
> This set is based on kukjin's for-next branch at
> http://git.kernel.org/cgit/linux/kernel/git/kgene/linux-samsung.git.
>
> v7:
> 1) Minor change in of-documentation.
> 2) Squash gpio pin-ctrl and ddc patch to one patch.
>
> v6:
> 1) Update clock numbers as per change in mux and divider clocks.
> 2) Isolate board changes from SoC patch and add a different patch for
> ddc.
>
> v5:
> 1) Merged Clock addition patch to DT nmde addition patch.
> 2) Add dout_pixel clock for hdmi in place of sclk_pixel.
> 3) Enable mixer node in soc dtsi file.
>
> v4:
> 1) Remove the movement of common properties to Exynos5.dtsi for
> I2C and hdmi subsystem.
> 2) Change the title of the patches.
>
> v3:
> 1) Rebase to kgene for-next based on 3.11-rc1.
> 2) Changes clock numbers as per updated clocks file for
> exyno5250 and exynos5420.
> 3) Dropped Sachin patch as already got merged.
>
> v2:
> 1) Added patch for moving common i2c properties to exynos5.dtsi
> 2) Added patch for moving common hdmi, mixer properties to exynos5.dtsi
> 3) moved hpd pinctrl node to board file.
> 4) Added Sachin's patch to update binding document for hdmi with hpd
> information.
>
> Andrew Bresticker (1):
> ARM: dts: add i2c device nodes for Exynos5420
>
> Rahul Sharma (4):
> of/documentation: update with clock information for exynos hdmi
> subsystem
> ARM: dts: add clocks to hdmi dt node for exynos5250
> ARM: dts: add dt nodes for hdmi subsystem for exynos5420
> ARM: dts: enable hdmi subsystem for exynos5420 smdk board
>
> Sean Paul (1):
> ARM: dts: add mixer clocks to mixer node for Exynos5250
>
> .../devicetree/bindings/video/exynos_hdmi.txt | 14 +++-
> .../devicetree/bindings/video/exynos_mixer.txt | 4 ++
> arch/arm/boot/dts/exynos5250.dtsi | 8 ++-
> arch/arm/boot/dts/exynos5420-smdk5420.dts | 26 +++++++
> arch/arm/boot/dts/exynos5420.dtsi | 75
> ++++++++++++++++++++ 5 files changed, 123 insertions(+), 4 deletions(-)
The whole series looks good to me now. Thanks for keeping up with all the
comments.
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
next prev parent reply other threads:[~2013-08-29 13:35 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-29 13:52 [PATCH v7 0/6] ARM: dts: add support for exynos hdmi subsystem Rahul Sharma
2013-08-29 13:35 ` Tomasz Figa [this message]
2013-08-30 4:43 ` Rahul Sharma
[not found] ` <CAPdUM4N7DeBkO8Dt859toB92SRskBc8wkGDCNJXt4Fz=YXSOBg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-09-30 7:51 ` Kukjin Kim
2013-08-29 13:52 ` [PATCH v7 1/6] of/documentation: update with clock information " Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 2/6] ARM: dts: add mixer clocks to mixer node for Exynos5250 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 3/6] ARM: dts: add clocks to hdmi dt node for exynos5250 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 4/6] ARM: dts: add i2c device nodes for Exynos5420 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 5/6] ARM: dts: add dt nodes for hdmi subsystem for exynos5420 Rahul Sharma
2013-08-29 13:52 ` [PATCH v7 6/6] ARM: dts: enable hdmi subsystem for exynos5420 smdk board Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1620695.hYygFk0Iax@amdc1227 \
--to=t.figa@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=rahul.sharma@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=sw0312.kim@samsung.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).