[PATCH v2 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280

[Prasad Malisetty <pmaliset@codeaurora.org>]

This series includes PCIe support for qualcomm sc7280
which includes PCIe controller and PHY DT bindings.
The PCIe controller and PHYs are mostly comaptible with SM8250 SoC,
hence the existing pcie drivers are modified to add the support.

Changes in v2:
	* Moved pcie pin control settings into IDP file.
	* Replaced pipe_clk_src with pipe_clk_mux in pcie driver 
	* Included pipe clk mux setting change set in this series

Prasad Malisetty (4):
  arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board
  arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
  PCIe: qcom: Add support to control pipe clk mux
  dt-bindings: pci: qcom: Document PCIe bindings for SC720

 .../devicetree/bindings/pci/qcom,pcie.txt          |  17 +++
 arch/arm64/boot/dts/qcom/sc7280-idp.dts            |  28 +++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi               | 138 +++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-qcom.c             |  22 ++++
 4 files changed, 205 insertions(+)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project