From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
max.schwarz-BGeptl67XyCzQB+pC5nmwQ@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH 1/8] pinctrl: rockchip: do not require 2nd register area
Date: Wed, 30 Apr 2014 00:07:52 +0200 [thread overview]
Message-ID: <16269641.hJnxW1RHY7@diego> (raw)
In-Reply-To: <1414506.B4e2jZujVm@diego>
Deprecate secondary register area for rk3188 pulls. Instead use big enough
initial mapping of grf registers to catch all.
The now deprecated register is still supported though.
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
.../devicetree/bindings/pinctrl/rockchip,pinctrl.txt | 2 ++
drivers/pinctrl/pinctrl-rockchip.c | 15 ++++++++++++---
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index f378d34..78dafc9 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -22,6 +22,8 @@ Required properties for iomux controller:
- compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
"rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
- reg: first element is the general register space of the iomux controller
+ It should be large enough to contain also separate pull registers.
+ Deprecated:
second element is the separate pull register space of the rk3188
Required properties for gpio sub nodes:
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 2e198a4..ab71de8 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -160,6 +160,7 @@ struct rockchip_pmx_func {
struct rockchip_pinctrl {
void __iomem *reg_base;
+ int reg_size;
void __iomem *reg_pull;
struct device *dev;
struct rockchip_pin_ctrl *ctrl;
@@ -416,6 +417,7 @@ static void rk2928_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
*bit = pin_num % RK2928_PULL_PINS_PER_REG;
};
+#define RK3188_PULL_OFFSET 0x164
#define RK3188_PULL_BITS_PER_PIN 2
#define RK3188_PULL_PINS_PER_REG 8
#define RK3188_PULL_BANK_STRIDE 16
@@ -432,7 +434,10 @@ static void rk3188_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
*bit = pin_num % RK3188_PULL_PINS_PER_REG;
*bit *= RK3188_PULL_BITS_PER_PIN;
} else {
- *reg = info->reg_pull - 4;
+ *reg = info->reg_pull ? info->reg_pull
+ : info->reg_base + RK3188_PULL_OFFSET;
+ /* correct the offset, as it is the 2nd pull register */
+ *reg -= 4;
*reg += bank->bank_num * RK3188_PULL_BANK_STRIDE;
*reg += ((pin_num / RK3188_PULL_PINS_PER_REG) * 4);
@@ -1427,6 +1432,7 @@ static int rockchip_get_bank_data(struct rockchip_pin_bank *bank,
*/
if (of_device_is_compatible(bank->of_node,
"rockchip,rk3188-gpio-bank0")) {
+
bank->bank_type = RK3188_BANK0;
if (of_address_to_resource(bank->of_node, 1, &res)) {
@@ -1525,8 +1531,11 @@ static int rockchip_pinctrl_probe(struct platform_device *pdev)
if (IS_ERR(info->reg_base))
return PTR_ERR(info->reg_base);
- /* The RK3188 has its pull registers in a separate place */
- if (ctrl->type == RK3188) {
+ /* to check for the old dt-bindings */
+ info->reg_size = resource_size(res);
+
+ /* Honor the old binding, with pull registers as 2nd resource */
+ if (ctrl->type == RK3188 && info->reg_size < 0x200) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
info->reg_pull = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(info->reg_pull))
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-04-29 22:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-29 22:07 [RFC/PATCH 0/8] pinctrl-rockchip: Change wrong initial assumptions Heiko Stübner
2014-04-29 22:07 ` Heiko Stübner [this message]
2014-04-29 22:08 ` [PATCH 2/8] pinctrl: rockchip: use regmaps instead of raw mappings Heiko Stübner
2014-05-04 13:31 ` Max Schwarz
2014-04-29 22:08 ` [PATCH 3/8] pinctrl: rockchip: rockchip_pinctrl in rockchip_get_bank_data Heiko Stübner
2014-04-29 22:09 ` [PATCH 4/8] pinctrl: rockchip: let pmu registers be supplied by a syscon Heiko Stübner
2014-04-29 22:09 ` [PATCH 5/8] pinctrl: rockchip: only map bank0-pull-region when pmu regmap missing Heiko Stübner
2014-04-29 22:10 ` [PATCH 6/8] pinctrl: rockchip: base regmap supplied by a syscon Heiko Stübner
2014-04-29 22:10 ` [PATCH 7/8] dt-bindings: adapt rockchip-pinctrl doc to changed bindings Heiko Stübner
2014-04-29 22:10 ` [PATCH 8/8] ARM: dts: rockchip: convert pinctrl nodes to new bindings Heiko Stübner
2014-05-01 10:43 ` [RFC/PATCH 0/8] pinctrl-rockchip: Change wrong initial assumptions Max Schwarz
2014-05-01 13:21 ` syscon or memory mappings (was: Re: [RFC/PATCH 0/8] pinctrl-rockchip: Change wrong initial assumptions) Heiko Stübner
2014-05-02 13:59 ` Max Schwarz
2014-05-02 23:45 ` Heiko Stübner
2014-05-03 12:40 ` Max Schwarz
2014-05-05 12:11 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16269641.hJnxW1RHY7@diego \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=max.schwarz-BGeptl67XyCzQB+pC5nmwQ@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).