Re: [PATCH 1/2] arm64: dts: qcom: sc8280xp: Add camera MCLK pinctrl

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 6/19/26 2:59 PM, Vladimir Zapolskiy wrote:
> On 6/19/26 15:35, Konrad Dybcio wrote:
>> On 6/11/26 7:29 AM, Pengyu Luo wrote:
>>> On Tue, Jun 9, 2026 at 8:17 PM Konrad Dybcio
>>> <konrad.dybcio@oss.qualcomm.com> wrote:
>>>>
>>>> On 6/7/26 6:04 PM, Pengyu Luo wrote:
>>>>> Define pinctrl definitions to enable camera master clocks on sc8280xp.
>>>>>
>>>>> Suggested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
>>>>> Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
>>>>> ---
>>>>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 56 ++++++++++++++++++++++++++
>>>>>   1 file changed, 56 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>>>> index a2bd6b10e475..0dbcd3069a3b 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>>>>> @@ -5484,6 +5484,62 @@ tlmm: pinctrl@f100000 {
>>>>>                        gpio-ranges = <&tlmm 0 0 230>;
>>>>>                        wakeup-parent = <&pdc>;
>>>>>
>>>>> +                     cam_mclk0_default: cam-mclk0-default-state {
>>>>> +                             pins = "gpio119";
>>>>> +                             function = "cam_mclk";
>>>>> +                             drive-strength = <6>;
>>>>
>>>> Other platforms set this to 2 by default.
>>>>
>>>> What's the value set on Windows when the camera is in use?
>>>>
>>>
>>> It is 6mA.
>>>
>>> Let us get ctl_reg first on Windows
>>>
>>> lkd> !dd f111000 L8
>>> # f111000 00000284 00000002 000000e2 00000000
>>> # f111010 00000001 00000801 00000000 00000000
>>>
>>> ctl_reg => 0x284
>>>
>>> in msm_gpio_dbg_show_one()
>>> ...
>>> drive = (ctl_reg >> g->drv_bit) & 7; // (0x284 >> 6) & 7 == 2
>>> ...
>>> seq_printf(s, " %dmA", msm_regval_to_drive(drive)); // (drive + 1) * 2 == 6;
>>> ...
>>>
>>> x13s should be the same as gaokun3 in this part.
>>
>> I confirmed as much and I'm willing to believe this is a default for
>> all 8280 devices
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>>
>> for the second patch, please mention in the commit message that the value
>> will now match windows and please add a fixes tag
>>
> 
> I believe the second change cannot be tagged as Fixes in sense that it
> strictly depends on a not going to be backported non-fix commit, and thus
> backporting of just 2/2 change as is will break the matter. Reordering of
> the commits placing the fix commit as the first one should be fine though.

The Fixes tag makes the patch eligible for backporting through AUTOSEL
but is itself not the same as "please backport"

Konrad