[PATCH RESEND v2 1/9] dt-bindings: clk: qcom: Add bindings for MSM8994 GCC driver

[PATCH RESEND v2 1/9] dt-bindings: clk: qcom: Add bindings for MSM8994 GCC driver

[Konrad Dybcio]

Add documentation for the MSM8994 GCC driver.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Acked-by: Rob Herring <robh@kernel.org>
---
No changes since the original v2, only added Rob's A-b

 .../bindings/clock/qcom,gcc-msm8994.yaml      | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
new file mode 100644
index 000000000000..b44a844d894c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Global Clock & Reset Controller Binding for MSM8994
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on MSM8994 and MSM8992.
+
+  See also:
+  - dt-bindings/clock/qcom,gcc-msm8994.h
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8992
+      - qcom,gcc-msm8994
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    description:
+      Protected clock specifier list as per common clock binding.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8994";
+      reg = <0x300000 0x90000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>;
+      clock-names = "xo", "sleep";
+    };
+...
-- 
2.33.0

[PATCH RESEND v2 4/9] clk: qcom: gcc-msm8994: Add missing NoC clocks

[Konrad Dybcio]

Add necessary NoC clocks to provide frequency sources for
relevant branch clocks.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/clk/qcom/gcc-msm8994.c               | 101 ++++++++++++++++---
 include/dt-bindings/clock/qcom,gcc-msm8994.h |   3 +
 2 files changed, 92 insertions(+), 12 deletions(-)

diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index 78c06104854e..629ab6ab455f 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -106,6 +106,42 @@ static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = {
 	{ .hw = &gpll4.clkr.hw },
 };
 
+static struct clk_rcg2 system_noc_clk_src = {
+	.cmd_rcgr = 0x0120,
+	.hid_width = 5,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "system_noc_clk_src",
+		.parent_data = gcc_xo_gpll0,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 config_noc_clk_src = {
+	.cmd_rcgr = 0x0150,
+	.hid_width = 5,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "config_noc_clk_src",
+		.parent_data = gcc_xo_gpll0,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_rcg2 periph_noc_clk_src = {
+	.cmd_rcgr = 0x0190,
+	.hid_width = 5,
+	.parent_map = gcc_xo_gpll0_map,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "periph_noc_clk_src",
+		.parent_data = gcc_xo_gpll0,
+		.num_parents = ARRAY_SIZE(gcc_xo_gpll0),
+		.ops = &clk_rcg2_ops,
+	},
+};
+
 static struct freq_tbl ftbl_ufs_axi_clk_src[] = {
 	F(50000000, P_GPLL0, 12, 0, 0),
 	F(100000000, P_GPLL0, 6, 0, 0),
@@ -1089,6 +1125,8 @@ static struct clk_branch gcc_blsp1_ahb_clk = {
 		.enable_mask = BIT(17),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_blsp1_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1372,6 +1410,8 @@ static struct clk_branch gcc_blsp2_ahb_clk = {
 		.enable_mask = BIT(15),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_blsp2_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1699,6 +1739,8 @@ static struct clk_branch gcc_lpass_q6_axi_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_lpass_q6_axi_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1711,6 +1753,8 @@ static struct clk_branch gcc_mss_q6_bimc_axi_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_mss_q6_bimc_axi_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1738,6 +1782,9 @@ static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_cfg_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1750,6 +1797,9 @@ static struct clk_branch gcc_pcie_0_mstr_axi_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_mstr_axi_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1779,6 +1829,9 @@ static struct clk_branch gcc_pcie_0_slv_axi_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_slv_axi_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1806,6 +1859,9 @@ static struct clk_branch gcc_pcie_1_cfg_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_cfg_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1818,6 +1874,9 @@ static struct clk_branch gcc_pcie_1_mstr_axi_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_mstr_axi_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1846,6 +1905,9 @@ static struct clk_branch gcc_pcie_1_slv_axi_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_slv_axi_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1873,6 +1935,8 @@ static struct clk_branch gcc_pdm_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pdm_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1900,10 +1964,9 @@ static struct clk_branch gcc_sdcc1_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_sdcc1_ahb_clk",
-			.parent_names = (const char *[]){
-				"periph_noc_clk_src",
-			},
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1916,10 +1979,9 @@ static struct clk_branch gcc_sdcc2_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_sdcc2_ahb_clk",
-			.parent_names = (const char *[]){
-				"periph_noc_clk_src",
-			},
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1947,10 +2009,9 @@ static struct clk_branch gcc_sdcc3_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_sdcc3_ahb_clk",
-			.parent_names = (const char *[]){
-				"periph_noc_clk_src",
-			},
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1978,10 +2039,9 @@ static struct clk_branch gcc_sdcc4_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_sdcc4_ahb_clk",
-			.parent_names = (const char *[]){
-				"periph_noc_clk_src",
-			},
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
 			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2039,6 +2099,8 @@ static struct clk_branch gcc_tsif_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_tsif_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2066,6 +2128,8 @@ static struct clk_branch gcc_ufs_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_ufs_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2109,6 +2173,8 @@ static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_ufs_rx_symbol_0_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2122,6 +2188,8 @@ static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_ufs_rx_symbol_1_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2150,6 +2218,8 @@ static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_ufs_tx_symbol_0_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2163,6 +2233,8 @@ static struct clk_branch gcc_ufs_tx_symbol_1_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_ufs_tx_symbol_1_clk",
+			.parent_hws = (const struct clk_hw *[]){ &system_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2254,6 +2326,8 @@ static struct clk_branch gcc_usb_hs_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_usb_hs_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
+			.num_parents = 1,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2331,6 +2405,9 @@ static struct clk_regmap *gcc_msm8994_clocks[] = {
 	[GPLL0] = &gpll0.clkr,
 	[GPLL4_EARLY] = &gpll4_early.clkr,
 	[GPLL4] = &gpll4.clkr,
+	[CONFIG_NOC_CLK_SRC] = &config_noc_clk_src.clkr,
+	[PERIPH_NOC_CLK_SRC] = &periph_noc_clk_src.clkr,
+	[SYSTEM_NOC_CLK_SRC] = &system_noc_clk_src.clkr,
 	[UFS_AXI_CLK_SRC] = &ufs_axi_clk_src.clkr,
 	[USB30_MASTER_CLK_SRC] = &usb30_master_clk_src.clkr,
 	[BLSP1_QUP1_I2C_APPS_CLK_SRC] = &blsp1_qup1_i2c_apps_clk_src.clkr,
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8994.h b/include/dt-bindings/clock/qcom,gcc-msm8994.h
index 507b8d6effd2..219d5441c0fa 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8994.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8994.h
@@ -148,6 +148,9 @@
 #define GCC_USB30_SLEEP_CLK			138
 #define GCC_USB_HS_AHB_CLK			139
 #define GCC_USB_PHY_CFG_AHB2PHY_CLK	140
+#define CONFIG_NOC_CLK_SRC			141
+#define PERIPH_NOC_CLK_SRC			142
+#define SYSTEM_NOC_CLK_SRC			143
 
 /* GDSCs */
 #define PCIE_GDSC			0
-- 
2.33.0

[PATCH RESEND v2 5/9] clk: qcom: gcc-msm8994: Add missing clocks

[Konrad Dybcio]

This should be the last "add missing clocks" commit, as to
my knowledge there are no more clocks registered within gcc.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/clk/qcom/gcc-msm8994.c               | 134 +++++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-msm8994.h |   9 ++
 2 files changed, 143 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index 629ab6ab455f..98b2fd429629 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -2319,6 +2319,19 @@ static struct clk_branch gcc_usb3_phy_aux_clk = {
 	},
 };
 
+static struct clk_branch gcc_usb3_phy_pipe_clk = {
+	.halt_reg = 0x140c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x140c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_usb3_phy_pipe_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct clk_branch gcc_usb_hs_ahb_clk = {
 	.halt_reg = 0x0488,
 	.clkr = {
@@ -2360,6 +2373,118 @@ static struct clk_branch gcc_usb_phy_cfg_ahb2phy_clk = {
 	},
 };
 
+static struct clk_branch gpll0_out_mmsscc = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1484,
+		.enable_mask = BIT(26),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll0_out_mmsscc",
+			.parent_hws = (const struct clk_hw *[]){ &gpll0.clkr.hw },
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpll0_out_msscc = {
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1484,
+		.enable_mask = BIT(27),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpll0_out_msscc",
+			.parent_hws = (const struct clk_hw *[]){ &gpll0.clkr.hw },
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch pcie_0_phy_ldo = {
+	.halt_reg = 0x1e00,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x1E00,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_0_phy_ldo",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch pcie_1_phy_ldo = {
+	.halt_reg = 0x1e04,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x1E04,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "pcie_1_phy_ldo",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch ufs_phy_ldo = {
+	.halt_reg = 0x1e0c,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x1E0C,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "ufs_phy_ldo",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch usb_ss_phy_ldo = {
+	.halt_reg = 0x1e08,
+	.halt_check = BRANCH_HALT_SKIP,
+	.clkr = {
+		.enable_reg = 0x1E08,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "usb_ss_phy_ldo",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_boot_rom_ahb_clk = {
+	.halt_reg = 0x0e04,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x0e04,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x1484,
+		.enable_mask = BIT(10),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_boot_rom_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &config_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_prng_ahb_clk = {
+	.halt_reg = 0x0d04,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1484,
+		.enable_mask = BIT(13),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_prng_ahb_clk",
+			.parent_hws = (const struct clk_hw *[]){ &periph_noc_clk_src.clkr.hw },
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc pcie_gdsc = {
 		.gdscr = 0x1e18,
 		.pd = {
@@ -2542,9 +2667,18 @@ static struct clk_regmap *gcc_msm8994_clocks[] = {
 	[GCC_USB30_MOCK_UTMI_CLK] = &gcc_usb30_mock_utmi_clk.clkr,
 	[GCC_USB30_SLEEP_CLK] = &gcc_usb30_sleep_clk.clkr,
 	[GCC_USB3_PHY_AUX_CLK] = &gcc_usb3_phy_aux_clk.clkr,
+	[GCC_USB3_PHY_PIPE_CLK] = &gcc_usb3_phy_pipe_clk.clkr,
 	[GCC_USB_HS_AHB_CLK] = &gcc_usb_hs_ahb_clk.clkr,
 	[GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr,
 	[GCC_USB_PHY_CFG_AHB2PHY_CLK] = &gcc_usb_phy_cfg_ahb2phy_clk.clkr,
+	[GPLL0_OUT_MMSSCC] = &gpll0_out_mmsscc.clkr,
+	[GPLL0_OUT_MSSCC] = &gpll0_out_msscc.clkr,
+	[PCIE_0_PHY_LDO] = &pcie_0_phy_ldo.clkr,
+	[PCIE_1_PHY_LDO] = &pcie_1_phy_ldo.clkr,
+	[UFS_PHY_LDO] = &ufs_phy_ldo.clkr,
+	[USB_SS_PHY_LDO] = &usb_ss_phy_ldo.clkr,
+	[GCC_BOOT_ROM_AHB_CLK] = &gcc_boot_rom_ahb_clk.clkr,
+	[GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr,
 };
 
 static struct gdsc *gcc_msm8994_gdscs[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8994.h b/include/dt-bindings/clock/qcom,gcc-msm8994.h
index 219d5441c0fa..dcb49817dcec 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8994.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8994.h
@@ -151,6 +151,15 @@
 #define CONFIG_NOC_CLK_SRC			141
 #define PERIPH_NOC_CLK_SRC			142
 #define SYSTEM_NOC_CLK_SRC			143
+#define GPLL0_OUT_MMSSCC			144
+#define GPLL0_OUT_MSSCC				145
+#define PCIE_0_PHY_LDO				146
+#define PCIE_1_PHY_LDO				147
+#define UFS_PHY_LDO					148
+#define USB_SS_PHY_LDO				149
+#define GCC_BOOT_ROM_AHB_CLK		150
+#define GCC_PRNG_AHB_CLK			151
+#define GCC_USB3_PHY_PIPE_CLK		152
 
 /* GDSCs */
 #define PCIE_GDSC			0
-- 
2.33.0

[PATCH RESEND v2 7/9] clk: qcom: gcc-msm8994: Add modem reset

[Konrad Dybcio]

This will be required to support the modem.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/clk/qcom/gcc-msm8994.c               | 1 +
 include/dt-bindings/clock/qcom,gcc-msm8994.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index 2ed206ecb60d..7545e973fd0d 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -2685,6 +2685,7 @@ static struct gdsc *gcc_msm8994_gdscs[] = {
 static const struct qcom_reset_map gcc_msm8994_resets[] = {
 	[USB3_PHY_RESET] = { 0x1400 },
 	[USB3PHY_PHY_RESET] = { 0x1404 },
+	[MSS_RESET] = { 0x1680 },
 	[PCIE_PHY_0_RESET] = { 0x1b18 },
 	[PCIE_PHY_1_RESET] = { 0x1b98 },
 	[QUSB2_PHY_RESET] = { 0x04b8 },
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8994.h b/include/dt-bindings/clock/qcom,gcc-msm8994.h
index dcb49817dcec..f6836f430bb5 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8994.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8994.h
@@ -174,5 +174,6 @@
 #define PCIE_PHY_0_RESET		2
 #define PCIE_PHY_1_RESET		3
 #define QUSB2_PHY_RESET			4
+#define MSS_RESET				5
 
 #endif
-- 
2.33.0

[PATCH RESEND v2 9/9] clk: qcom: gcc-msm8994: Add a quirk for a different SDCC configuration

[Konrad Dybcio]

Some devices come with a different SDCC clock configuration,
account for that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 .../bindings/clock/qcom,gcc-msm8994.yaml         |  4 ++++
 drivers/clk/qcom/gcc-msm8994.c                   | 16 ++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
index b44a844d894c..4ba2f72d3cad 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
@@ -49,6 +49,10 @@ properties:
     description:
       Protected clock specifier list as per common clock binding.
 
+  qcom,sdcc2-clk-src-40mhz:
+    description: SDCC2_APPS clock source runs at 40MHz.
+    type: boolean
+
 required:
   - compatible
   - reg
diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index 72038e4c04df..55c0fd069640 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -1012,6 +1012,19 @@ static struct clk_rcg2 sdcc1_apps_clk_src = {
 	},
 };
 
+static struct freq_tbl ftbl_sdcc2_40mhz_apps_clk_src[] = {
+	F(144000, P_XO, 16, 3, 25),
+	F(400000, P_XO, 12, 1, 4),
+	F(20000000, P_GPLL0, 15, 1, 2),
+	F(25000000, P_GPLL0, 12, 1, 2),
+	F(40000000, P_GPLL0, 15, 0, 0),
+	F(50000000, P_GPLL0, 12, 0, 0),
+	F(80000000, P_GPLL0, 7.5, 0, 0),
+	F(100000000, P_GPLL0, 6, 0, 0),
+	F(200000000, P_GPLL0, 3, 0, 0),
+	{ }
+};
+
 static struct freq_tbl ftbl_sdcc2_4_apps_clk_src[] = {
 	F(144000, P_XO, 16, 3, 25),
 	F(400000, P_XO, 12, 1, 4),
@@ -2788,6 +2801,9 @@ static int gcc_msm8994_probe(struct platform_device *pdev)
 		gcc_msm8994_desc.clks[GCC_SYS_NOC_UFS_AXI_CLK] = NULL;
 	}
 
+	if (of_find_property(dev->of_node, "qcom,sdcc2-clk-src-40mhz", NULL))
+		sdcc2_apps_clk_src.freq_tbl = ftbl_sdcc2_40mhz_apps_clk_src;
+
 	return qcom_cc_probe(pdev, &gcc_msm8994_desc);
 }
 
-- 
2.33.0

Re: [PATCH RESEND v2 9/9] clk: qcom: gcc-msm8994: Add a quirk for a different SDCC configuration

[Stephen Boyd]

Quoting Konrad Dybcio (2021-08-29 12:36:16)
> diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
> index b44a844d894c..4ba2f72d3cad 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
> @@ -49,6 +49,10 @@ properties:
>      description:
>        Protected clock specifier list as per common clock binding.
>  
> +  qcom,sdcc2-clk-src-40mhz:
> +    description: SDCC2_APPS clock source runs at 40MHz.
> +    type: boolean
> +
>  required:
>    - compatible
>    - reg
> diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
> index 72038e4c04df..55c0fd069640 100644
> --- a/drivers/clk/qcom/gcc-msm8994.c
> +++ b/drivers/clk/qcom/gcc-msm8994.c
> @@ -1012,6 +1012,19 @@ static struct clk_rcg2 sdcc1_apps_clk_src = {
>         },
>  };
>  
> +static struct freq_tbl ftbl_sdcc2_40mhz_apps_clk_src[] = {
> +       F(144000, P_XO, 16, 3, 25),
> +       F(400000, P_XO, 12, 1, 4),
> +       F(20000000, P_GPLL0, 15, 1, 2),
> +       F(25000000, P_GPLL0, 12, 1, 2),
> +       F(40000000, P_GPLL0, 15, 0, 0),
> +       F(50000000, P_GPLL0, 12, 0, 0),
> +       F(80000000, P_GPLL0, 7.5, 0, 0),
> +       F(100000000, P_GPLL0, 6, 0, 0),
> +       F(200000000, P_GPLL0, 3, 0, 0),

It should work to add more frequencies to the existing table. The
consumer will need to pick the correct frequency. That can be achieved
with an OPP table if necessary, in the consumer node.

> +       { }
> +};
> +
>  static struct freq_tbl ftbl_sdcc2_4_apps_clk_src[] = {
>         F(144000, P_XO, 16, 3, 25),
>         F(400000, P_XO, 12, 1, 4),

Re: [PATCH RESEND v2 1/9] dt-bindings: clk: qcom: Add bindings for MSM8994 GCC driver

[Rob Herring]

On Sun, 29 Aug 2021 21:36:08 +0200, Konrad Dybcio wrote:
> Add documentation for the MSM8994 GCC driver.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
> No changes since the original v2, only added Rob's A-b
> 
>  .../bindings/clock/qcom,gcc-msm8994.yaml      | 72 +++++++++++++++++++
>  1 file changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.example.dt.yaml: clock-controller@300000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1522007

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.