Re: [PATCH v2 2/3] arm64: dts: renesas: Add panel overlay for Salvator-X(S) boards

[Kieran Bingham <kieran.bingham@ideasonboard.com>]

Quoting Laurent Pinchart (2021-12-29 19:31:34)
> The Salvator-X and Salvator-XS boards support an optional LVDS panel.
> One compatible panel is the Mitsubishi AA104XD12. Add a corresponding DT
> overlay.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> ---
> Changes since v1:
> 
> - Create endpoint in lvds0 port@1
> ---
>  arch/arm64/boot/dts/renesas/Makefile          |  2 ++
>  .../dts/renesas/salvator-panel-aa104xd12.dts  | 36 +++++++++++++++++++
>  2 files changed, 38 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts
> 
> diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
> index d1c5c21d8d14..982ca3e0e86f 100644
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -74,3 +74,5 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
>  dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
>  
>  dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
> +
> +dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
> diff --git a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts
> new file mode 100644
> index 000000000000..c83a30adc6ad
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dts
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree overlay for the AA104XD12 panel connected to LVDS0 on a
> + * Salvator-X or Salvator-XS board
> + *
> + * Copyright 2021 Ideas on Board Oy
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&{/} {
> +#include "panel-aa104xd12.dtsi"

I guess parameters would help reduce the redundancy of having to 
define per-board overlays, but this fits what we have got so:


Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

> +};
> +
> +&{/panel} {
> +       backlight = <&backlight>;
> +
> +       port {
> +               panel_in: endpoint {
> +                       remote-endpoint = <&lvds0_out>;
> +               };
> +       };
> +};
> +
> +&lvds0 {
> +       status = "okay";
> +
> +       ports {
> +               port@1 {
> +                       lvds0_out: endpoint {
> +                               remote-endpoint = <&panel_in>;
> +                       };
> +               };
> +       };
> +};
> -- 
> Regards,
> 
> Laurent Pinchart
>