From: Kartik <kkartik@nvidia.com>
To: <daniel.lezcano@linaro.org>, <tglx@linutronix.de>,
<robh+dt@kernel.org>, <krzk+dt@kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<spujar@nvidia.com>, <akhilrajeev@nvidia.com>,
<rgumasta@nvidia.com>, <pshete@nvidia.com>, <vidyas@nvidia.com>,
<mperttunen@nvidia.com>, <mkumard@nvidia.com>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <kkartik@nvidia.com>
Subject: [PATCH 1/6] dt-bindings: timer: Add Tegra186 & Tegra234 Timer
Date: Thu, 14 Apr 2022 13:55:33 +0530 [thread overview]
Message-ID: <1649924738-17990-2-git-send-email-kkartik@nvidia.com> (raw)
In-Reply-To: <1649924738-17990-1-git-send-email-kkartik@nvidia.com>
The Tegra186 timer provides ten 29-bit timer counters and one 32-bit
timestamp counter. The Tegra234 timer provides sixteen 29-bit timer
counters and one 32-bit timestamp counter. Each NV timer selects its
timing reference signal from the 1 MHz reference generated by USEC,
TSC or either clk_m or OSC. Each TMR can be programmed to generate
one-shot, periodic, or watchdog interrupts.
Signed-off-by: Kartik <kkartik@nvidia.com>
---
.../bindings/timer/nvidia,tegra186-timer.yaml | 116 ++++++++++++++++++
1 file changed, 116 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
new file mode 100644
index 000000000000..7841a68d19f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/timer/nvidia,tegra186-timer.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NVIDIA Tegra186 timer
+
+maintainers:
+ - Thierry Reding <treding@nvidia.com>
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra186-timer
+ then:
+ properties:
+ interrupts:
+ # Either a single combined interrupt or up to 14 individual interrupts
+ minItems: 1
+ maxItems: 10
+ description: >
+ A list of 10 interrupts; one per each timer channels 0 through 9.
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nvidia,tegra234-timer
+ then:
+ properties:
+ interrupts:
+ # Either a single combined interrupt or up to 16 individual interrupts
+ minItems: 1
+ maxItems: 16
+ description: >
+ A list of 16 interrupts; one per each timer channels 0 through 15.
+
+properties:
+ compatible:
+ oneOf:
+ - const: nvidia,tegra186-timer
+ description: >
+ The Tegra186 timer provides ten 29-bit timer counters and one 32-bit
+ timestamp counter. Each NV timer selects its timing reference signal
+ from the 1 MHz reference generated by USEC, TSC or either clk_m or
+ OSC. Each TMR can be programmed to generate one-shot, periodic, or
+ watchdog interrupts.
+ - const: nvidia,tegra234-timer
+ description: >
+ The Tegra234 timer provides sixteen 29-bit timer counters and one 32-bit
+ timestamp counter. Each NV timer selects its timing reference signal
+ from the 1 MHz reference generated by USEC, TSC or either clk_m or
+ OSC. Each TMR can be programmed to generate one-shot, periodic, or
+ watchdog interrupts.
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@3010000 {
+ compatible = "nvidia,tegra186-timer";
+ reg = <0x03010000 0x000e0000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ timer@2080000 {
+ compatible = "nvidia,tegra234-timer";
+ reg = <0x02080000 0x00121000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
--
2.17.1
next prev parent reply other threads:[~2022-04-14 8:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-14 8:25 [PATCH 0/6] Add watchdog timer support for Tegra186/194/234 SoCs Kartik
2022-04-14 8:25 ` Kartik [this message]
2022-04-14 18:20 ` [PATCH 1/6] dt-bindings: timer: Add Tegra186 & Tegra234 Timer Rob Herring
2022-04-20 13:14 ` Kartik
2022-04-14 8:25 ` [PATCH 2/6] clocksource: Add Tegra186 timers support Kartik
2022-04-14 8:25 ` [PATCH 3/6] clocksource/drivers/timer-tegra186: Add support for Tegra234 SoC Kartik
2022-04-14 8:25 ` [PATCH 4/6] arm64: tegra: Enable native timers on Tegra186 Kartik
2022-04-14 8:25 ` [PATCH 5/6] arm64: tegra: Enable native timers on Tegra194 Kartik
2022-04-14 8:25 ` [PATCH 6/6] arm64: tegra: Enable native timers on Tegra234 Kartik
2022-06-20 15:45 ` [PATCH 0/6] Add watchdog timer support for Tegra186/194/234 SoCs Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1649924738-17990-2-git-send-email-kkartik@nvidia.com \
--to=kkartik@nvidia.com \
--cc=akhilrajeev@nvidia.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mkumard@nvidia.com \
--cc=mperttunen@nvidia.com \
--cc=pshete@nvidia.com \
--cc=rgumasta@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=spujar@nvidia.com \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=vidyas@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).