Re: [PATCH v10 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties

[Rob Herring <robh@kernel.org>]

On Thu, 19 May 2022 19:13:21 +0800, Axe Yang wrote:
> Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
> This feature allow SDIO devices alarm asynchronous interrupt to host
> even when host stop providing clock to SDIO card. An extra wakeup
> interrupt and pinctrl states for SDIO DAT1 pin state switching are
> required in this scenario.
> 
> Signed-off-by: Axe Yang <axe.yang@mediatek.com>
> ---
>  .../devicetree/bindings/mmc/mtk-sd.yaml       | 53 ++++++++++++++++++-
>  1 file changed, 52 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/mmc/mtk-sd.example.dts:50.36-37 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:364: Documentation/devicetree/bindings/mmc/mtk-sd.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1401: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.