* [PATCH v4 0/2] Add software clock gating requirement check @ 2022-06-09 14:30 Srinivasa Rao Mandadapu 2022-06-09 14:30 ` [PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check Srinivasa Rao Mandadapu 2022-06-09 14:30 ` [PATCH v4 2/2] ASoC: qcom: soundwire: Enable software clock gating requirement flag Srinivasa Rao Mandadapu 0 siblings, 2 replies; 5+ messages in thread From: Srinivasa Rao Mandadapu @ 2022-06-09 14:30 UTC (permalink / raw) To: agross, bjorn.andersson, lgirdwood, broonie, robh+dt, quic_plai, bgoswami, perex, tiwai, srinivas.kandagatla, quic_rohkumar, linux-arm-msm, alsa-devel, devicetree, linux-kernel, swboyd, judyhsiao, vkoul Cc: Srinivasa Rao Mandadapu This patch set is to add software clock gating requirement check Changes Since V3: -- Remove redundant check before reset control call -- Reorganiaze patches. -- Fix typos. Changes Since V2: -- Fix if check before reset control call Changes Since V1: -- Use boolean flag for bool variable initialization instead of hard coding. Srinivasa Rao Mandadapu (2): soundwire: qcom: Add flag for software clock gating check ASoC: qcom: soundwire: Enable software clock gating requirement flag drivers/soundwire/qcom.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) -- 2.7.4 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check 2022-06-09 14:30 [PATCH v4 0/2] Add software clock gating requirement check Srinivasa Rao Mandadapu @ 2022-06-09 14:30 ` Srinivasa Rao Mandadapu 2022-06-09 15:22 ` Pierre-Louis Bossart 2022-06-09 14:30 ` [PATCH v4 2/2] ASoC: qcom: soundwire: Enable software clock gating requirement flag Srinivasa Rao Mandadapu 1 sibling, 1 reply; 5+ messages in thread From: Srinivasa Rao Mandadapu @ 2022-06-09 14:30 UTC (permalink / raw) To: agross, bjorn.andersson, lgirdwood, broonie, robh+dt, quic_plai, bgoswami, perex, tiwai, srinivas.kandagatla, quic_rohkumar, linux-arm-msm, alsa-devel, devicetree, linux-kernel, swboyd, judyhsiao, vkoul Cc: Srinivasa Rao Mandadapu Validate software clock gating required or not and do software clock gating on hclk if soundwire is operational and keep it running by adding flag in private data structure. This is to avoid conflict between older architectures, where software clock gating is not required and on latest architectues, where software clock gating is mandatory. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/soundwire/qcom.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index a3fccf0..8e163da 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -181,6 +181,7 @@ struct qcom_swrm_ctrl { struct qcom_swrm_data { u32 default_cols; u32 default_rows; + bool sw_clk_gate_required; }; static const struct qcom_swrm_data swrm_v1_3_data = { @@ -1311,6 +1312,15 @@ static int qcom_swrm_probe(struct platform_device *pdev) return PTR_ERR(ctrl->mmio); } + if (data->sw_clk_gate_required) { + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); + if (IS_ERR(ctrl->audio_cgcr)) { + dev_err(dev, "Failed to get cgcr reset ctrl required for SW gating\n"); + ret = PTR_ERR(ctrl->audio_cgcr); + goto err_init; + } + } + ctrl->irq = of_irq_get(dev->of_node, 0); if (ctrl->irq < 0) { ret = ctrl->irq; @@ -1336,10 +1346,6 @@ static int qcom_swrm_probe(struct platform_device *pdev) ctrl->bus.compute_params = &qcom_swrm_compute_params; ctrl->bus.clk_stop_timeout = 300; - ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); - if (IS_ERR(ctrl->audio_cgcr)) - dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); - ret = qcom_swrm_get_port_config(ctrl); if (ret) goto err_clk; -- 2.7.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check 2022-06-09 14:30 ` [PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check Srinivasa Rao Mandadapu @ 2022-06-09 15:22 ` Pierre-Louis Bossart 2022-06-10 10:04 ` Srinivasa Rao Mandadapu 0 siblings, 1 reply; 5+ messages in thread From: Pierre-Louis Bossart @ 2022-06-09 15:22 UTC (permalink / raw) To: Srinivasa Rao Mandadapu, agross, bjorn.andersson, lgirdwood, broonie, robh+dt, quic_plai, bgoswami, perex, tiwai, srinivas.kandagatla, quic_rohkumar, linux-arm-msm, alsa-devel, devicetree, linux-kernel, swboyd, judyhsiao, vkoul On 6/9/22 09:30, Srinivasa Rao Mandadapu wrote: > Validate software clock gating required or not and do software > clock gating on hclk if soundwire is operational and keep it > running by adding flag in private data structure. > This is to avoid conflict between older architectures, > where software clock gating is not required and on latest > architectues, where software clock gating is mandatory. architectures. > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > drivers/soundwire/qcom.c | 14 ++++++++++---- > 1 file changed, 10 insertions(+), 4 deletions(-) > > diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c > index a3fccf0..8e163da 100644 > --- a/drivers/soundwire/qcom.c > +++ b/drivers/soundwire/qcom.c > @@ -181,6 +181,7 @@ struct qcom_swrm_ctrl { > struct qcom_swrm_data { > u32 default_cols; > u32 default_rows; > + bool sw_clk_gate_required; > }; > > static const struct qcom_swrm_data swrm_v1_3_data = { > @@ -1311,6 +1312,15 @@ static int qcom_swrm_probe(struct platform_device *pdev) > return PTR_ERR(ctrl->mmio); > } > > + if (data->sw_clk_gate_required) { > + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); > + if (IS_ERR(ctrl->audio_cgcr)) { You need to handle the NULL case, devm_reset_control_get_exclusive() can return ERR_OR_NULL https://elixir.bootlin.com/linux/latest/source/drivers/reset/core.c#L1045 > + dev_err(dev, "Failed to get cgcr reset ctrl required for SW gating\n"); > + ret = PTR_ERR(ctrl->audio_cgcr); > + goto err_init; > + } > + } > + > ctrl->irq = of_irq_get(dev->of_node, 0); > if (ctrl->irq < 0) { > ret = ctrl->irq; > @@ -1336,10 +1346,6 @@ static int qcom_swrm_probe(struct platform_device *pdev) > ctrl->bus.compute_params = &qcom_swrm_compute_params; > ctrl->bus.clk_stop_timeout = 300; > > - ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); > - if (IS_ERR(ctrl->audio_cgcr)) > - dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); > - > ret = qcom_swrm_get_port_config(ctrl); > if (ret) > goto err_clk; ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check 2022-06-09 15:22 ` Pierre-Louis Bossart @ 2022-06-10 10:04 ` Srinivasa Rao Mandadapu 0 siblings, 0 replies; 5+ messages in thread From: Srinivasa Rao Mandadapu @ 2022-06-10 10:04 UTC (permalink / raw) To: Pierre-Louis Bossart, agross, bjorn.andersson, lgirdwood, broonie, robh+dt, quic_plai, bgoswami, perex, tiwai, srinivas.kandagatla, quic_rohkumar, linux-arm-msm, alsa-devel, devicetree, linux-kernel, swboyd, judyhsiao, vkoul On 6/9/2022 8:52 PM, Pierre-Louis Bossart wrote: Thanks for your time Pierre-Louis!!! > > On 6/9/22 09:30, Srinivasa Rao Mandadapu wrote: >> Validate software clock gating required or not and do software >> clock gating on hclk if soundwire is operational and keep it >> running by adding flag in private data structure. >> This is to avoid conflict between older architectures, >> where software clock gating is not required and on latest >> architectues, where software clock gating is mandatory. > architectures. Okay. Will fix it. > >> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> >> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> drivers/soundwire/qcom.c | 14 ++++++++++---- >> 1 file changed, 10 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c >> index a3fccf0..8e163da 100644 >> --- a/drivers/soundwire/qcom.c >> +++ b/drivers/soundwire/qcom.c >> @@ -181,6 +181,7 @@ struct qcom_swrm_ctrl { >> struct qcom_swrm_data { >> u32 default_cols; >> u32 default_rows; >> + bool sw_clk_gate_required; >> }; >> >> static const struct qcom_swrm_data swrm_v1_3_data = { >> @@ -1311,6 +1312,15 @@ static int qcom_swrm_probe(struct platform_device *pdev) >> return PTR_ERR(ctrl->mmio); >> } >> >> + if (data->sw_clk_gate_required) { >> + ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); >> + if (IS_ERR(ctrl->audio_cgcr)) { > You need to handle the NULL case, devm_reset_control_get_exclusive() can > return ERR_OR_NULL > > https://elixir.bootlin.com/linux/latest/source/drivers/reset/core.c#L1045 Okay. Will change accordingly. > >> + dev_err(dev, "Failed to get cgcr reset ctrl required for SW gating\n"); >> + ret = PTR_ERR(ctrl->audio_cgcr); >> + goto err_init; >> + } >> + } >> + >> ctrl->irq = of_irq_get(dev->of_node, 0); >> if (ctrl->irq < 0) { >> ret = ctrl->irq; >> @@ -1336,10 +1346,6 @@ static int qcom_swrm_probe(struct platform_device *pdev) >> ctrl->bus.compute_params = &qcom_swrm_compute_params; >> ctrl->bus.clk_stop_timeout = 300; >> >> - ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr"); >> - if (IS_ERR(ctrl->audio_cgcr)) >> - dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n"); >> - >> ret = qcom_swrm_get_port_config(ctrl); >> if (ret) >> goto err_clk; ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v4 2/2] ASoC: qcom: soundwire: Enable software clock gating requirement flag 2022-06-09 14:30 [PATCH v4 0/2] Add software clock gating requirement check Srinivasa Rao Mandadapu 2022-06-09 14:30 ` [PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check Srinivasa Rao Mandadapu @ 2022-06-09 14:30 ` Srinivasa Rao Mandadapu 1 sibling, 0 replies; 5+ messages in thread From: Srinivasa Rao Mandadapu @ 2022-06-09 14:30 UTC (permalink / raw) To: agross, bjorn.andersson, lgirdwood, broonie, robh+dt, quic_plai, bgoswami, perex, tiwai, srinivas.kandagatla, quic_rohkumar, linux-arm-msm, alsa-devel, devicetree, linux-kernel, swboyd, judyhsiao, vkoul Cc: Srinivasa Rao Mandadapu Enable software clock gating flag in private data for SC7280 based platforms, which are soundwire 1.6.0 version based. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/soundwire/qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 8e163da..b1bdf17 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -194,6 +194,12 @@ static const struct qcom_swrm_data swrm_v1_5_data = { .default_cols = 16, }; +static const struct qcom_swrm_data swrm_v1_6_data = { + .default_rows = 50, + .default_cols = 16, + .sw_clk_gate_required = true, +}; + #define to_qcom_sdw(b) container_of(b, struct qcom_swrm_ctrl, bus) static int qcom_swrm_ahb_reg_read(struct qcom_swrm_ctrl *ctrl, int reg, @@ -1564,7 +1570,7 @@ static const struct dev_pm_ops swrm_dev_pm_ops = { static const struct of_device_id qcom_swrm_of_match[] = { { .compatible = "qcom,soundwire-v1.3.0", .data = &swrm_v1_3_data }, { .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data }, - { .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_5_data }, + { .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data }, {/* sentinel */}, }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2022-06-10 10:04 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2022-06-09 14:30 [PATCH v4 0/2] Add software clock gating requirement check Srinivasa Rao Mandadapu 2022-06-09 14:30 ` [PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check Srinivasa Rao Mandadapu 2022-06-09 15:22 ` Pierre-Louis Bossart 2022-06-10 10:04 ` Srinivasa Rao Mandadapu 2022-06-09 14:30 ` [PATCH v4 2/2] ASoC: qcom: soundwire: Enable software clock gating requirement flag Srinivasa Rao Mandadapu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).