From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
<robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
<dianders@chromium.org>, <swboyd@chromium.org>,
<judyhsiao@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v14 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1
Date: Thu, 7 Jul 2022 18:53:04 +0530 [thread overview]
Message-ID: <1657200184-29565-13-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1657200184-29565-1-git-send-email-quic_srivasam@quicinc.com>
Add dt nodes for sound card support on rev5+ (aka CRD 3.0/3.1) boards,
which is using WCD9385 headset playback, capture, I2S speaker playback
and DMICs via VA macro.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
.../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 101 +++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
index 989a895..c72e53a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi
@@ -5,6 +5,107 @@
* Copyright (c) 2022, The Linux Foundation. All rights reserved.
*/
+/ {
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
+};
+
/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
&lpass_cpu {
--
2.7.4
next prev parent reply other threads:[~2022-07-07 13:24 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-07 13:22 [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:22 ` [PATCH v14 07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-07-07 13:23 ` [PATCH v14 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-07-07 13:23 ` Srinivasa Rao Mandadapu [this message]
2022-07-07 15:28 ` [PATCH v14 00/12] Add soundcard support for sc7280 based platforms Bjorn Andersson
2022-07-08 4:03 ` Srinivasa Rao Mandadapu
2022-09-13 15:04 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1657200184-29565-13-git-send-email-quic_srivasam@quicinc.com \
--to=quic_srivasam@quicinc.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=judyhsiao@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_potturu@quicinc.com \
--cc=quic_rohkumar@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).