From: Rob Herring <robh@kernel.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: linux-imx@nxp.com, linux-kernel@vger.kernel.org,
kernel@pengutronix.de, festevam@gmail.com,
Peng Fan <peng.fan@nxp.com>,
s.hauer@pengutronix.de, devicetree@vger.kernel.org,
xiaoning.wang@nxp.com, shawnguo@kernel.org, robh+dt@kernel.org,
linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
aisheng.dong@nxp.com, krzysztof.kozlowski+dt@linaro.org
Subject: Re: [PATCH 1/6] dt-bindings: i2c: i2c-imx-lpi2c: add ipg clk
Date: Fri, 12 Aug 2022 09:13:53 -0600 [thread overview]
Message-ID: <1660317233.465911.168987.nullmailer@robh.at.kernel.org> (raw)
In-Reply-To: <20220812043424.4078034-2-peng.fan@oss.nxp.com>
On Fri, 12 Aug 2022 12:34:19 +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> i.MX LPI2C actually requires dual clock: per clock and ipg clock, so add
> both.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 9 ++++++---
> 1 file changed, 6 insertions(+), 3 deletions(-)
>
Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/patch/
i2c@40a40000: clock-names:0: 'per' was expected
arch/arm/boot/dts/imx7ulp-com.dtb
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@40a40000: clock-names: ['ipg'] is too short
arch/arm/boot/dts/imx7ulp-com.dtb
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@40a40000: clocks: [[14, 2]] is too short
arch/arm/boot/dts/imx7ulp-com.dtb
i2c@40a40000: clocks: [[18, 2]] is too short
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@40a40000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
arch/arm/boot/dts/imx7ulp-com.dtb
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@40a50000: clock-names:0: 'per' was expected
arch/arm/boot/dts/imx7ulp-com.dtb
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@40a50000: clock-names: ['ipg'] is too short
arch/arm/boot/dts/imx7ulp-com.dtb
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@40a50000: clocks: [[14, 3]] is too short
arch/arm/boot/dts/imx7ulp-com.dtb
i2c@40a50000: clocks: [[18, 3]] is too short
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@40a50000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
arch/arm/boot/dts/imx7ulp-com.dtb
arch/arm/boot/dts/imx7ulp-evk.dtb
i2c@5a800000: clock-names: ['per'] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a800000: clocks: [[15, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
i2c@5a800000: clocks: [[35, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
i2c@5a800000: clocks: [[37, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a800000: clocks: [[38, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
i2c@5a800000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a810000: clock-names: ['per'] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a810000: clocks: [[16, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
i2c@5a810000: clocks: [[36, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
i2c@5a810000: clocks: [[38, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a810000: clocks: [[43, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
i2c@5a810000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a820000: clock-names: ['per'] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a820000: clocks: [[17, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
i2c@5a820000: clocks: [[37, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
i2c@5a820000: clocks: [[43, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a820000: clocks: [[45, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
i2c@5a820000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a830000: clock-names: ['per'] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a830000: clocks: [[18, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
i2c@5a830000: clocks: [[38, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
i2c@5a830000: clocks: [[44, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
i2c@5a830000: clocks: [[46, 0]] is too short
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
i2c@5a830000: Unevaluated properties are not allowed ('clock-names', 'clocks' were unexpected)
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dtb
arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb
next prev parent reply other threads:[~2022-08-12 15:15 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-12 4:34 [PATCH 0/6] i2c-imx-lpi2c: add IPG clock Peng Fan (OSS)
2022-08-12 4:34 ` [PATCH 1/6] dt-bindings: i2c: i2c-imx-lpi2c: add ipg clk Peng Fan (OSS)
2022-08-12 10:11 ` Krzysztof Kozlowski
2022-08-12 15:13 ` Rob Herring [this message]
2022-08-12 4:34 ` [PATCH 2/6] dt-bindings: i2c: i2c-imx-lpi2c: add dmas property Peng Fan (OSS)
2022-08-12 10:11 ` Krzysztof Kozlowski
2022-08-12 4:34 ` [PATCH 3/6] dt-bindings: i2c: i2c-imx-lpi2c: add i.MX93 Peng Fan (OSS)
2022-08-12 10:11 ` Krzysztof Kozlowski
2022-08-12 4:34 ` [PATCH 4/6] arm64: dts: imx8-ss-dma: add IPG clock for i2c Peng Fan (OSS)
2022-08-12 4:34 ` [PATCH 5/6] ARM: dts: imx7ulp: Add PER clock for lpi2c Peng Fan (OSS)
2022-08-12 4:34 ` [PATCH 6/6] i2c: imx-lpi2c: handle IPG clock Peng Fan (OSS)
2022-08-12 10:13 ` Krzysztof Kozlowski
2022-08-12 18:58 ` Krzysztof Kozlowski
2022-08-12 10:14 ` [PATCH 0/6] i2c-imx-lpi2c: add " Krzysztof Kozlowski
2022-08-15 0:52 ` Peng Fan
2022-08-16 6:01 ` Krzysztof Kozlowski
2022-08-16 6:31 ` Peng Fan
2022-08-16 8:43 ` Peng Fan
2022-08-16 9:44 ` Krzysztof Kozlowski
2022-08-16 9:47 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1660317233.465911.168987.nullmailer@robh.at.kernel.org \
--to=robh@kernel.org \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).