Re: [PATCH net-next v3 4/5] net: dt-bindings: Introduce the Qualcomm IPQESS Ethernet controller

[Rob Herring <robh@kernel.org>]

On Fri, 26 Aug 2022 17:46:49 +0200, Maxime Chevallier wrote:
> Add the DT binding for the IPQESS Ethernet Controller. This is a simple
> controller, only requiring the phy-mode, interrupts, clocks, and
> possibly a MAC address setting.
> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> V2->V3:
>  - Cleanup on reset and clock names
> V1->V2:
>  - Fixed the example
>  - Added reset and clocks
>  - Removed generic ethernet attributes
> 
>  .../devicetree/bindings/net/qcom,ipqess.yaml  | 95 +++++++++++++++++++
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/qcom,ipqess.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/net/qcom,ipqess.example.dtb:0:0: /example-0/ethernet@c080000: failed to match any schema with compatible: ['qcom,ipq4019-ess-edma']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.