devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Richard Zhu <hongxing.zhu@nxp.com>
To: p.zabel@pengutronix.de, l.stach@pengutronix.de,
	bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
	shawnguo@kernel.org, vkoul@kernel.org,
	alexander.stein@ew.tq-group.com, marex@denx.de,
	richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
	linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kernel@pengutronix.de,
	linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v4 3/6] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support
Date: Mon, 29 Aug 2022 16:15:14 +0800	[thread overview]
Message-ID: <1661760917-9558-4-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1661760917-9558-1-git-send-email-hongxing.zhu@nxp.com>

Add i.MX8MP PCIe PHY support

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 150 ++++++++++++++-------
 1 file changed, 104 insertions(+), 46 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index ad7d2edfc414..3463b4299f2f 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -31,12 +33,10 @@
 #define IMX8MM_PCIE_PHY_CMN_REG065	0x194
 #define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
 #define  ANA_AUX_TX_LVL			GENMASK(3, 0)
-#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
-#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
+#define IMX8MM_PCIE_PHY_CMN_REG075	0x1D4
+#define  ANA_PLL_DONE			0x3
 #define PCIE_PHY_TRSV_REG5		0x414
-#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
 #define PCIE_PHY_TRSV_REG6		0x418
-#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
 
 #define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
 #define IMX8MM_GPR_PCIE_REF_CLK_PLL	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
@@ -47,16 +47,29 @@
 #define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
 #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
 
+#define IMX8MP_GPR_REG0			0x0
+#define IMX8MP_GPR_PHY_APB_RST		BIT(4)
+#define IMX8MP_GPR_PHY_INIT_RST		BIT(5)
+
+enum imx8_pcie_phy_type {
+	IMX8MM,
+	IMX8MP,
+};
+
 struct imx8_pcie_phy {
 	void __iomem		*base;
+	struct device		*dev;
 	struct clk		*clk;
 	struct phy		*phy;
+	struct regmap		*hsio_blk_ctrl;
 	struct regmap		*iomuxc_gpr;
 	struct reset_control	*reset;
+	struct reset_control	*perst;
 	u32			refclk_pad_mode;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2;
 	bool			clkreq_unused;
+	enum imx8_pcie_phy_type	variant;
 };
 
 static int imx8_pcie_phy_init(struct phy *phy)
@@ -68,31 +81,27 @@ static int imx8_pcie_phy_init(struct phy *phy)
 	reset_control_assert(imx8_phy->reset);
 
 	pad_mode = imx8_phy->refclk_pad_mode;
-	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
-			   imx8_phy->clkreq_unused ?
-			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_AUX_EN,
-			   IMX8MM_GPR_PCIE_AUX_EN);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_SSC_EN, 0);
-
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
-			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
-			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
-			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
-	usleep_range(100, 200);
-
-	/* Do the PHY common block reset */
-	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
-			   IMX8MM_GPR_PCIE_CMN_RST,
-			   IMX8MM_GPR_PCIE_CMN_RST);
-	usleep_range(200, 500);
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		/* Tune PHY de-emphasis setting to pass PCIe compliance. */
+		if (imx8_phy->tx_deemph_gen1)
+			writel(imx8_phy->tx_deemph_gen1,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG5);
+		if (imx8_phy->tx_deemph_gen2)
+			writel(imx8_phy->tx_deemph_gen2,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+		break;
+	case IMX8MP:
+		reset_control_assert(imx8_phy->perst);
+
+		/* release pcie_phy_apb_reset and pcie_phy_init_resetn */
+		regmap_update_bits(imx8_phy->hsio_blk_ctrl, IMX8MP_GPR_REG0,
+				   IMX8MP_GPR_PHY_APB_RST |
+				   IMX8MP_GPR_PHY_INIT_RST,
+				   IMX8MP_GPR_PHY_APB_RST |
+				   IMX8MP_GPR_PHY_INIT_RST);
+		break;
+	}
 
 	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ||
 	    pad_mode == IMX8_PCIE_REFCLK_PAD_UNUSED) {
@@ -120,20 +129,44 @@ static int imx8_pcie_phy_init(struct phy *phy)
 		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
 	}
 
-	/* Tune PHY de-emphasis setting to pass PCIe compliance. */
-	if (imx8_phy->tx_deemph_gen1)
-		writel(imx8_phy->tx_deemph_gen1,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
-	if (imx8_phy->tx_deemph_gen2)
-		writel(imx8_phy->tx_deemph_gen2,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
+			   imx8_phy->clkreq_unused ?
+			   0 : IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_AUX_EN,
+			   IMX8MM_GPR_PCIE_AUX_EN);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_POWER_OFF, 0);
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_SSC_EN, 0);
+
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_REF_CLK_SEL,
+			   pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT ?
+			   IMX8MM_GPR_PCIE_REF_CLK_EXT :
+			   IMX8MM_GPR_PCIE_REF_CLK_PLL);
+	usleep_range(100, 200);
 
-	reset_control_deassert(imx8_phy->reset);
+	/* Do the PHY common block reset */
+	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
+			   IMX8MM_GPR_PCIE_CMN_RST,
+			   IMX8MM_GPR_PCIE_CMN_RST);
+
+	switch (imx8_phy->variant) {
+	case IMX8MP:
+		reset_control_deassert(imx8_phy->perst);
+		fallthrough;
+	case IMX8MM:
+		reset_control_deassert(imx8_phy->reset);
+		usleep_range(200, 500);
+		break;
+	}
 
 	/* Polling to check the phy is ready or not. */
-	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
-				 val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
-				 10, 20000);
+	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
+				 val, val == ANA_PLL_DONE, 10, 20000);
 	return ret;
 }
 
@@ -160,18 +193,33 @@ static const struct phy_ops imx8_pcie_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+	{.compatible = "fsl,imx8mm-pcie-phy", .data = (void *)IMX8MM},
+	{.compatible = "fsl,imx8mp-pcie-phy", .data = (void *)IMX8MP},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
 static int imx8_pcie_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
 	struct device_node *np = dev->of_node;
 	struct imx8_pcie_phy *imx8_phy;
 	struct resource *res;
 
+	of_id = of_match_device(imx8_pcie_phy_of_match, dev);
+	if (!of_id)
+		return -EINVAL;
+
 	imx8_phy = devm_kzalloc(dev, sizeof(*imx8_phy), GFP_KERNEL);
 	if (!imx8_phy)
 		return -ENOMEM;
 
+	imx8_phy->dev = dev;
+	imx8_phy->variant = (enum imx8_pcie_phy_type)of_id->data;
+
 	/* get PHY refclk pad mode */
 	of_property_read_u32(np, "fsl,refclk-pad-mode",
 			     &imx8_phy->refclk_pad_mode);
@@ -208,6 +256,22 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to get PCIEPHY reset control\n");
 		return PTR_ERR(imx8_phy->reset);
 	}
+	if (imx8_phy->variant == IMX8MP) {
+		/* Grab HSIO MIX config register range */
+		imx8_phy->hsio_blk_ctrl =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mp-hsio-blk-ctrl");
+		if (IS_ERR(imx8_phy->hsio_blk_ctrl)) {
+			dev_err(dev, "Unable to find HSIO MIX registers\n");
+			return PTR_ERR(imx8_phy->hsio_blk_ctrl);
+		}
+
+		imx8_phy->perst =
+			devm_reset_control_get_exclusive(dev, "perst");
+		if (IS_ERR(imx8_phy->perst)) {
+			dev_err(dev, "Failed to get PCIE PHY PERST control\n");
+			return PTR_ERR(imx8_phy->perst);
+		}
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	imx8_phy->base = devm_ioremap_resource(dev, res);
@@ -225,12 +289,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
-	{.compatible = "fsl,imx8mm-pcie-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
 static struct platform_driver imx8_pcie_phy_driver = {
 	.probe	= imx8_pcie_phy_probe,
 	.driver = {
-- 
2.25.1


  parent reply	other threads:[~2022-08-29  8:33 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-29  8:15 [PATCH v4 0/6] Add iMX8MP PCIe support Richard Zhu
2022-08-29  8:15 ` [PATCH v4 1/6] reset: imx7: Fix the iMX8MP PCIe PHY PERST support Richard Zhu
2022-08-29  8:15 ` [PATCH v4 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding Richard Zhu
2022-08-29  8:15 ` Richard Zhu [this message]
2022-08-29  8:15 ` [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support Richard Zhu
2022-08-29 15:23   ` Lucas Stach
2022-08-30  2:58     ` Hongxing Zhu
2022-08-29  8:15 ` [PATCH v4 5/6] arm64: dts: imx8mp-evk: Add " Richard Zhu
2022-08-29  8:15 ` [PATCH v4 6/6] PCI: imx6: Add iMX8MP " Richard Zhu
2022-08-29 15:16 ` [PATCH 1/2] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets Lucas Stach
2022-08-29 15:16   ` [PATCH 2/2] fixup! phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support Lucas Stach
2022-08-30  7:45     ` Vinod Koul
2022-08-29 15:20 ` [PATCH v4 0/6] Add iMX8MP PCIe support Lucas Stach
2022-08-30  2:58   ` Hongxing Zhu
2022-08-30  7:46     ` Lucas Stach
2022-08-30  7:52       ` Hongxing Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1661760917-9558-4-git-send-email-hongxing.zhu@nxp.com \
    --to=hongxing.zhu@nxp.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=marex@denx.de \
    --cc=p.zabel@pengutronix.de \
    --cc=richard.leitner@linux.dev \
    --cc=robh@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).