From: Richard Zhu <hongxing.zhu@nxp.com>
To: p.zabel@pengutronix.de, l.stach@pengutronix.de,
bhelgaas@google.com, lorenzo.pieralisi@arm.com, robh@kernel.org,
shawnguo@kernel.org, vkoul@kernel.org,
alexander.stein@ew.tq-group.com, marex@denx.de,
richard.leitner@linux.dev
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v4 6/6] PCI: imx6: Add iMX8MP PCIe support
Date: Mon, 29 Aug 2022 16:15:17 +0800 [thread overview]
Message-ID: <1661760917-9558-7-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1661760917-9558-1-git-send-email-hongxing.zhu@nxp.com>
Add i.MX8MP PCIe support.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 6e5debdbc55b..786f5737ca6a 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -51,6 +51,7 @@ enum imx6_pcie_variants {
IMX7D,
IMX8MQ,
IMX8MM,
+ IMX8MP,
};
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
@@ -150,7 +151,8 @@ struct imx6_pcie {
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
{
WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
- imx6_pcie->drvdata->variant != IMX8MM);
+ imx6_pcie->drvdata->variant != IMX8MM &&
+ imx6_pcie->drvdata->variant != IMX8MP);
return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
}
@@ -301,6 +303,7 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
case IMX8MM:
+ case IMX8MP:
/*
* The PHY initialization had been done in the PHY
* driver, break here directly.
@@ -558,6 +561,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
break;
case IMX8MM:
case IMX8MQ:
+ case IMX8MP:
ret = clk_prepare_enable(imx6_pcie->pcie_aux);
if (ret) {
dev_err(dev, "unable to enable pcie_aux clock\n");
@@ -602,6 +606,7 @@ static void imx6_pcie_disable_ref_clk(struct imx6_pcie *imx6_pcie)
break;
case IMX8MM:
case IMX8MQ:
+ case IMX8MP:
clk_disable_unprepare(imx6_pcie->pcie_aux);
break;
default:
@@ -669,6 +674,7 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
reset_control_assert(imx6_pcie->pciephy_reset);
fallthrough;
case IMX8MM:
+ case IMX8MP:
reset_control_assert(imx6_pcie->apps_reset);
break;
case IMX6SX:
@@ -744,6 +750,7 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
break;
case IMX6Q: /* Nothing to do */
case IMX8MM:
+ case IMX8MP:
break;
}
@@ -793,6 +800,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
case IMX7D:
case IMX8MQ:
case IMX8MM:
+ case IMX8MP:
reset_control_deassert(imx6_pcie->apps_reset);
break;
}
@@ -812,6 +820,7 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
case IMX7D:
case IMX8MQ:
case IMX8MM:
+ case IMX8MP:
reset_control_assert(imx6_pcie->apps_reset);
break;
}
@@ -1179,6 +1188,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
}
break;
case IMX8MM:
+ case IMX8MP:
imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
if (IS_ERR(imx6_pcie->pcie_aux))
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
@@ -1320,6 +1330,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
.variant = IMX8MM,
.flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
},
+ [IMX8MP] = {
+ .variant = IMX8MP,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ },
};
static const struct of_device_id imx6_pcie_of_match[] = {
@@ -1329,6 +1343,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
{ .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
{ .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
+ { .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
{},
};
--
2.25.1
next prev parent reply other threads:[~2022-08-29 8:33 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-29 8:15 [PATCH v4 0/6] Add iMX8MP PCIe support Richard Zhu
2022-08-29 8:15 ` [PATCH v4 1/6] reset: imx7: Fix the iMX8MP PCIe PHY PERST support Richard Zhu
2022-08-29 8:15 ` [PATCH v4 2/6] dt-binding: phy: Add iMX8MP PCIe PHY binding Richard Zhu
2022-08-29 8:15 ` [PATCH v4 3/6] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support Richard Zhu
2022-08-29 8:15 ` [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support Richard Zhu
2022-08-29 15:23 ` Lucas Stach
2022-08-30 2:58 ` Hongxing Zhu
2022-08-29 8:15 ` [PATCH v4 5/6] arm64: dts: imx8mp-evk: Add " Richard Zhu
2022-08-29 8:15 ` Richard Zhu [this message]
2022-08-29 15:16 ` [PATCH 1/2] soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets Lucas Stach
2022-08-29 15:16 ` [PATCH 2/2] fixup! phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support Lucas Stach
2022-08-30 7:45 ` Vinod Koul
2022-08-29 15:20 ` [PATCH v4 0/6] Add iMX8MP PCIe support Lucas Stach
2022-08-30 2:58 ` Hongxing Zhu
2022-08-30 7:46 ` Lucas Stach
2022-08-30 7:52 ` Hongxing Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1661760917-9558-7-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=marex@denx.de \
--cc=p.zabel@pengutronix.de \
--cc=richard.leitner@linux.dev \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).