Re: [PATCH v3 02/12] dt-bindings: media: i2c: max9286: Add property to select I2C speed

[Rob Herring <robh@kernel.org>]

On Thu, 15 Dec 2022 01:38:15 +0200, Laurent Pinchart wrote:
> The I2C speed on the remote side (the I2C master bus of the connected
> serializers) is configurable, and doesn't need to match the speed of the
> local bus (the slave bus of the MAX9286). All remote buses must use the
> same speed, and the MAX9286 needs to be programmed accordingly. Add a
> new DT property to select the speed to make it configurable.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Changes since v2:
> 
> - Rename property to maxim,i2c-remote-bus-hz
> - Specify the property type
> ---
>  .../devicetree/bindings/media/i2c/maxim,max9286.yaml      | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml: properties:maxim,i2c-remote-bus-hz: '$ref' should not be valid under {'const': '$ref'}
	hint: Standard unit suffix properties don't need a type $ref
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221214233825.13050-3-laurent.pinchart+renesas@ideasonboard.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.