From: <gene_chen@richtek.com>
To: <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<linux@roeck-us.net>, <heikki.krogerus@linux.intel.com>
Cc: <gregkh@linuxfoundation.org>, <linux-usb@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Gene Chen <gene_chen@richtek.com>
Subject: [PATCH 1/2] dt-bindings usb: typec: rt1718s: Add binding for Richtek RT1718S
Date: Mon, 9 Jan 2023 17:31:13 +0800 [thread overview]
Message-ID: <1673256674-25165-1-git-send-email-gene_chen@richtek.com> (raw)
From: Gene Chen <gene_chen@richtek.com>
Add binding for Richtek RT1718s
Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
.../devicetree/bindings/usb/richtek,rt1718s.yaml | 98 ++++++++++++++++++++++
1 file changed, 98 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1718s.yaml
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1718s.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1718s.yaml
new file mode 100644
index 00000000..7797fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1718s.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/richtek,rt1718s.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Richtek RT1718S Type-C Port Switch and Power Delivery controller
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ The RT1718S is a USB Type-C controller that complies with the latest
+ USB Type-C and PD standards. It does the USB Type-C detection including attach
+ and orientation. It integrates the physical layer of the USB BMC power
+ delivery protocol to allow up to 100W of power. The BMC PD block enables full
+ support for alternative interfaces of the Type-C specification.
+
+properties:
+ compatible:
+ enum:
+ - richtek,rt1718s
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source:
+ description: enable IRQ remote wakeup, see power/wakeup-source.txt
+ type: boolean
+
+ connector:
+ type: object
+ $ref: ../connector/usb-connector.yaml#
+ description:
+ Properties for usb c connector.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - connector
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/usb/pd.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1718s@43 {
+ compatible = "richtek,rt1718s";
+ reg = <0x43>;
+ interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ endpoint {
+ remote-endpoint = <&usb_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ endpoint {
+ remote-endpoint = <&usb_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ endpoint {
+ remote-endpoint = <&dp_aux>;
+ };
+ };
+ };
+ };
+ };
+ };
+...
--
2.7.4
next reply other threads:[~2023-01-09 9:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-09 9:31 gene_chen [this message]
2023-01-09 9:31 ` [PATCH 2/2] usb: typec: tcpci_rt1718s: Add Richtek RT1718S tcpci driver gene_chen
2023-01-09 10:17 ` Krzysztof Kozlowski
2023-01-09 18:52 ` Guenter Roeck
[not found] ` <2af0661f930d4393bda9f7e771654bac@richtek.com>
2023-01-12 8:05 ` FW: " Gene Chen
2023-01-12 14:18 ` Guenter Roeck
2023-01-09 10:14 ` [PATCH 1/2] dt-bindings usb: typec: rt1718s: Add binding for Richtek RT1718S Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1673256674-25165-1-git-send-email-gene_chen@richtek.com \
--to=gene_chen@richtek.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).