[PATCH v2 2/2] arm64: dts: qcom: sm8450: Add IMEM and PIL info region

[Mukesh Ojha <quic_mojha@quicinc.com>]

Add a simple-mfd representing IMEM on SM8450 and define the PIL
relocation info region, so that post mortem tools will be able
to locate the loaded remoteprocs.

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
---
Changes in v2:
 -  put ranges after regs and corrected the sram node position.

 arch/arm64/boot/dts/qcom/sm8450.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1a744a3..2a4f4ac 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3814,6 +3814,20 @@
 			};
 		};
 
+		sram@146aa000 {
+			compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
+			reg = <0 0x146aa000 0 0x1000>;
+			ranges = <0 0 0x146aa000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		timer@17420000 {
 			compatible = "arm,armv7-timer-mem";
 			#address-cells = <1>;
-- 
2.7.4