Re: [PATCH v4 1/2] dt-bindings: PCI: mediatek-gen3: Add support for controlling power and reset

[Krzysztof Kozlowski <krzk@kernel.org>]

On 06/11/2023 07:12, Jian Yang wrote:
> From: "jian.yang" <jian.yang@mediatek.com>
> 
> Add new properties to support control power supplies and reset pin of
> a downstream component.
> 
> Signed-off-by: jian.yang <jian.yang@mediatek.com>

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC (and consider --no-git-fallback argument). It might
happen, that command when run on an older kernel, gives you outdated
entries. Therefore please be sure you base your patches on recent Linux
kernel.

> ---
>  .../bindings/pci/mediatek-pcie-gen3.yaml      | 30 +++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> index 7e8c7a2a5f9b..a4f6b48d57fa 100644
> --- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
> @@ -84,6 +84,26 @@ properties:
>      items:
>        enum: [ phy, mac ]
>  
> +  vpcie1v8-supply:
> +    description:
> +      The regulator phandle that provides 1.8V power from root port to a
> +      downstream component.
> +
> +  vpcie3v3-supply:
> +    description:
> +      The regulator phandle that provides 3.3V power from root port to a
> +      downstream component.
> +
> +  vpcie12v-supply:
> +    description:
> +      The regulator phandle that provides 12V power from root port to a
> +      downstream component.
> +
> +  dsc-reset-gpios:
> +    description:
> +      The extra reset pin other than PERST# required by a downstream component.
> +    maxItems: 1

How did you implement Rob's feedback? Or did you just ignore it?

This does not look like property of the controller. Aren't you now
trying to implement power-sequencing of devices via properties of host
controller?

Best regards,
Krzysztof