Re: [PATCH v3 2/4] dt-bindings: gpio: add support for NXP S32G2/S32G3 SoCs

[Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>]

Hi Conor,

Thank you for your review!

On 20/09/2024 15:46, Conor Dooley wrote:
> On Thu, Sep 19, 2024 at 04:47:22PM +0300, Andrei Stefanescu wrote:
>> Add support for the GPIO driver of the NXP S32G2/S32G3 SoCs.
>>
>> Signed-off-by: Phu Luu An <phu.luuan@nxp.com>
>> Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
>> Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@nxp.com>
>> Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
>> ---
>>  .../bindings/gpio/nxp,s32g2-siul2-gpio.yaml   | 107 ++++++++++++++++++
>>  1 file changed, 107 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml b/Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml
>> new file mode 100644
>> index 000000000000..0548028e6745
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/gpio/nxp,s32g2-siul2-gpio.yaml
>> @@ -0,0 +1,107 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause
>> +# Copyright 2024 NXP
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/gpio/nxp,s32g2-siul2-gpio.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: NXP S32G2 SIUL2 GPIO controller
>> +
>> +maintainers:
>> +  - Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
>> +  - Larisa Grigore <larisa.grigore@nxp.com>
>> +  - Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
>> +
>> +description:
>> +  Support for the SIUL2 GPIOs found on the S32G2 and S32G3
>> +  chips. It includes an IRQ controller for all pins which have
>> +  an EIRQ associated.
>> +
>> +properties:
>> +  compatible:
>> +    items:
>> +      - const: nxp,s32g2-siul2-gpio
> 
> Commit message and binding description say s32g2 and s32g3, but there's
> only a compatible here for g2.

Yes, the SIUL2 GPIO hardware is the same for both S32G2 and S32G3 SoCs. I plan
to reuse the same compatible when I add the SIUL2 GPIO device tree node for
the S32G3 boards. Would that be ok?

Best regards,
Andrei