[PATCH v1 5/5] arm64: dts: qcom: sa8775p: Add ep pcie0 controller node

[Mrinmay Sarkar <quic_msarkar@quicinc.com>]

Add ep pcie dtsi node for pcie0 controller found on sa8775p platform.

Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 45 +++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 9f4f58e8..5571131 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -2600,4 +2600,49 @@
 
 		status = "disabled";
 	};
+
+	pcie0_ep: pcie-ep@1c00000 {
+		compatible = "qcom,sa8775p-pcie-ep";
+		reg = <0x0 0x01c00000 0x0 0x3000>,
+		      <0x0 0x40000000 0x0 0xf20>,
+		      <0x0 0x40000f20 0x0 0xa8>,
+		      <0x0 0x40001000 0x0 0x4000>,
+		      <0x0 0x40200000 0x0 0x100000>,
+		      <0x0 0x01c03000 0x0 0x1000>,
+		      <0x0 0x40005000 0x0 0x2000>;
+		reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+			    "mmio", "dma";
+
+		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+			<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+			<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+			<&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+
+		clock-names = "aux",
+			      "cfg",
+			      "bus_master",
+			      "bus_slave",
+			      "slave_q2a";
+
+		interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH>;
+
+		interrupt-names = "global", "doorbell", "dma";
+
+		interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
+				<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
+		interconnect-names = "pcie-mem", "cpu-pcie";
+
+		resets = <&gcc GCC_PCIE_0_BCR>;
+		reset-names = "core";
+		power-domains = <&gcc PCIE_0_GDSC>;
+		phys = <&pcie0_phy>;
+		phy-names = "pciephy";
+		max-link-speed = <3>;
+		num-lanes = <2>;
+
+		status = "disabled";
+	};
 };
-- 
2.7.4