[PATCH v4 0/4] arm64: qcom: sa8775p: add support for EP PCIe

[Mrinmay Sarkar <quic_msarkar@quicinc.com>]

This series adds the relavent DT bindings, new compatible string,
add support to EPF driver and add EP PCIe node in dtsi file for
ep pcie0 controller.

v3 -> v4:
- add maxItems field in dt bindings
- update comment in patch2
- dropped PHY driver patch as it is already applied [1]
- update comment in EPF driver patch
- update commect in dtsi and add iommus instead of iommu-map

[1] https://lore.kernel.org/all/169804254205.383714.18423881810869732517.b4-ty@kernel.org/

v2 -> v3:
- removed if/then schemas, added minItems for reg,
  reg-bnames, interrupt and interrupt-names instead.
- adding qcom,sa8775p-pcie-ep compitable for sa8775p
  as we have some specific change to add.
- reusing sm8450's pcs_misc num table as it is same as sa8775p.
  used appropriate namespace for pcs.
- remove const from sa8775p_header as kernel test robot
  throwing some warnings due to this.
- remove fallback compatiable as we are adding compatiable for sa8775p.

v1 -> v2:
- update description for dma
- Reusing qcom,sdx55-pcie-ep compatibe so remove compaitable
  for sa8775p
- sort the defines in phy header file and remove extra defines
- add const in return type pci_epf_header and remove MHI_EPF_USE_DMA
  flag as hdma patch is not ready
- add fallback compatiable as qcom,sdx55-pcie-ep, add iommu property


Mrinmay Sarkar (4):
  dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
  PCI: qcom-ep: Add support for SA8775P SOC
  PCI: epf-mhi: Add support for SA8775P
  arm64: dts: qcom: sa8775p: Add ep pcie0 controller node

 .../devicetree/bindings/pci/qcom,pcie-ep.yaml      | 48 +++++++++++++++++++++-
 arch/arm64/boot/dts/qcom/sa8775p.dtsi              | 46 +++++++++++++++++++++
 drivers/pci/controller/dwc/pcie-qcom-ep.c          |  1 +
 drivers/pci/endpoint/functions/pci-epf-mhi.c       | 17 ++++++++
 4 files changed, 110 insertions(+), 2 deletions(-)

-- 
2.7.4