From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Rob Herring <robh+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Simon Horman <horms@verge.net.au>,
devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Magnus Damm <magnus.damm@gmail.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/11] arm64: dts: renesas: r8a77980: add [H]SCIF support
Date: Fri, 2 Feb 2018 21:39:08 +0300 [thread overview]
Message-ID: <169ed4ac-1b8b-cf8c-45c4-957ebbdf3f5e@cogentembedded.com> (raw)
In-Reply-To: <46fca582-220d-e5a7-62cd-2fc77a29846b@cogentembedded.com>
Describe [H]SCIF ports in the R8A77980 device tree.
Based on the original (and large) patch by Vladimir Barinov.
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
arch/arm64/boot/dts/renesas/r8a77980.dtsi | 151 ++++++++++++++++++++++++++++++
1 file changed, 151 insertions(+)
Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
===================================================================
--- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -56,6 +56,13 @@
method = "smc";
};
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -85,6 +92,150 @@
#power-domain-cells = <1>;
};
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a77980",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a77980",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a77980",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a77980",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x37>, <&dmac1 0x36>,
+ <&dmac2 0x37>, <&dmac2 0x36>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a77980",
+ "renesas,rcar-gen3-scif",
+ "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a77980",
+ "renesas,rcar-gen3-scif",
+ "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a77980",
+ "renesas,rcar-gen3-scif",
+ "renesas,scif";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x57>, <&dmac1 0x56>,
+ <&dmac2 0x57>, <&dmac2 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a77980",
+ "renesas,rcar-gen3-scif",
+ "renesas,scif";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE 16>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x59>, <&dmac1 0x58>,
+ <&dmac2 0x59>, <&dmac2 0x58>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
dmac1: dma-controller@e7300000 {
compatible = "renesas,dmac-r8a77980",
"renesas,rcar-dmac";
next prev parent reply other threads:[~2018-02-02 18:39 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-02 18:18 [PATCH 00/11] Add R8A77980/Condor board support Sergei Shtylyov
2018-02-02 18:27 ` [PATCH 02/11] soc: renesas: rcar-rst: add R8A77980 support Sergei Shtylyov
2018-02-05 9:19 ` Simon Horman
[not found] ` <76b4144e-423a-65fd-fe17-bfedbc0deb8e-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2018-02-05 12:37 ` Geert Uytterhoeven
2018-02-06 12:45 ` Simon Horman
2018-02-02 18:33 ` [PATCH 05/11] arm64: dts: renesas: initial R8A77980 SoC device tree Sergei Shtylyov
2018-02-05 13:32 ` Geert Uytterhoeven
[not found] ` <CAMuHMdWad2OJ33Hu0KbYS3nLWhgmj81_wRbtwApw-N81q3+nsA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-05 13:48 ` Sergei Shtylyov
2018-02-05 13:51 ` Geert Uytterhoeven
[not found] ` <CAMuHMdVfuruK36OUVdOcHaJogoM8oee_+b+4UzjBfUBoMiEbOQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-06 12:52 ` Simon Horman
[not found] ` <46fca582-220d-e5a7-62cd-2fc77a29846b-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2018-02-02 18:29 ` [PATCH 03/11] dt-bindings: power: add R8A77980 SYSC power domain definitions Sergei Shtylyov
2018-02-05 9:56 ` Simon Horman
[not found] ` <5177bec1-422f-688d-ea67-f15951505b1e-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2018-02-05 12:43 ` Geert Uytterhoeven
[not found] ` <CAMuHMdWUGbnF+vA6r4NCvNh3-TLhnWZCm3ixxfy2+s6+9giKiw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-06 12:47 ` Simon Horman
2018-02-02 18:31 ` [PATCH 04/11] soc: renesas: rcar-sysc: add R8A77980 support Sergei Shtylyov
[not found] ` <0309d18d-d5d8-ab59-9c15-79b4093e0a51-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2018-02-05 13:23 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUQuUhbiPnO1L7t5W5F8wJ72iYLM5VtT4gg0RuePcx7RA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-15 16:48 ` Sergei Shtylyov
[not found] ` <b61b4bd9-a1ac-8145-237f-71049a13b90f-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2018-02-15 18:27 ` Sergei Shtylyov
2018-02-07 10:29 ` Simon Horman
[not found] ` <20180207102942.jmggcp5isiwdzwqt-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2018-02-07 10:56 ` Sergei Shtylyov
2018-02-02 18:36 ` [PATCH 06/11] arm64: dts: renesas: r8a77980: add SYS-DMAC support Sergei Shtylyov
2018-02-06 11:40 ` Geert Uytterhoeven
2018-02-06 12:55 ` Simon Horman
2018-02-02 18:42 ` [PATCH 08/11] arm64: dts: renesas: r8a77980: add EtherAVB support Sergei Shtylyov
2018-02-06 12:04 ` Geert Uytterhoeven
2018-02-06 15:19 ` Sergei Shtylyov
2018-02-02 18:46 ` [PATCH 10/11] arm64: dts: renesas: initial Condor board device tree Sergei Shtylyov
[not found] ` <c35dca71-fc63-7628-d483-ad690bea7ced-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2018-02-09 7:42 ` Geert Uytterhoeven
2018-02-02 18:48 ` [PATCH 11/11] arm64: dts: renesas: condor: add EtherAVB support Sergei Shtylyov
2018-02-02 18:39 ` Sergei Shtylyov [this message]
2018-02-06 11:58 ` [PATCH 07/11] arm64: dts: renesas: r8a77980: add [H]SCIF support Geert Uytterhoeven
[not found] ` <CAMuHMdWXc=1s5rMU5Tc_=tH4jrH+5P6z52J3ihiyYfseTpQ-kw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-06 16:41 ` Sergei Shtylyov
2018-02-02 18:45 ` [PATCH 09/11] DT: arm: shmobile: document Condor board bindings Sergei Shtylyov
[not found] ` <30a4e575-a2c9-e0d3-f41f-4e9b15543365-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2018-02-08 20:13 ` Rob Herring
2018-02-09 9:18 ` Simon Horman
2018-02-09 7:27 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=169ed4ac-1b8b-cf8c-45c4-957ebbdf3f5e@cogentembedded.com \
--to=sergei.shtylyov@cogentembedded.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).