* [PATCH v3 1/7] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file
2023-01-19 12:27 [PATCH v3 0/7] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
@ 2023-01-19 12:27 ` Srinivasa Rao Mandadapu
2023-01-19 12:27 ` [PATCH v3 2/7] arm64: dts: qcom: sc7280: Add sound node Srinivasa Rao Mandadapu
` (5 subsequent siblings)
6 siblings, 0 replies; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-19 12:27 UTC (permalink / raw)
To: vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
Cc: Srinivasa Rao Mandadapu
Split common idp dtsi file into audio specific dtsi and common
idp dtsi file.
It is required to isolate idp and crd-rev3 platform device tree nodes
and convert crd-rev3 platform device tree nodes into audioreach specific
device tree nodes.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi | 135 +++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 1 +
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 126 -----------------------
3 files changed, 136 insertions(+), 126 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
new file mode 100644
index 0000000..614fb06
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-audio-idp.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 Audio IDP board device tree source (common between SKU1 and SKU2)
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/{
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-wcd938x-max98360a-1mic";
+
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS3",
+ "VA DMIC1", "MIC BIAS3",
+ "VA DMIC2", "MIC BIAS1",
+ "VA DMIC3", "MIC BIAS1",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ qcom,msm-mbhc-hphl-swh = <1>;
+ qcom,msm-mbhc-gnd-swh = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360A";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "DisplayPort";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_DP_RX>;
+ };
+
+ codec {
+ sound-dai = <&mdss_dp>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "WCD9385 Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "WCD9385 Capture";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+ };
+
+ dai-link@4 {
+ link-name = "DMIC";
+ reg = <4>;
+
+ cpu {
+ sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+ };
+ };
+};
+
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+
+ dai-link@5 {
+ reg = <LPASS_DP_RX>;
+ };
+
+ dai-link@6 {
+ reg = <LPASS_CDC_DMA_RX0>;
+ };
+
+ dai-link@19 {
+ reg = <LPASS_CDC_DMA_TX3>;
+ };
+
+ dai-link@25 {
+ reg = <LPASS_CDC_DMA_VA_TX0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 1185141..b024626 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-idp.dtsi"
+#include "sc7280-audio-idp.dtsi"
#include "sc7280-idp-ec-h1.dtsi"
/ {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index fa10ddd..6b41574 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -87,104 +87,6 @@
pinctrl-names = "default";
pinctrl-0 = <&nvme_pwren>;
};
-
- sound: sound {
- compatible = "google,sc7280-herobrine";
- model = "sc7280-wcd938x-max98360a-1mic";
-
- audio-routing =
- "IN1_HPHL", "HPHL_OUT",
- "IN2_HPHR", "HPHR_OUT",
- "AMIC1", "MIC BIAS1",
- "AMIC2", "MIC BIAS2",
- "VA DMIC0", "MIC BIAS3",
- "VA DMIC1", "MIC BIAS3",
- "VA DMIC2", "MIC BIAS1",
- "VA DMIC3", "MIC BIAS1",
- "TX SWR_ADC0", "ADC1_OUTPUT",
- "TX SWR_ADC1", "ADC2_OUTPUT",
- "TX SWR_ADC2", "ADC3_OUTPUT",
- "TX SWR_DMIC0", "DMIC1_OUTPUT",
- "TX SWR_DMIC1", "DMIC2_OUTPUT",
- "TX SWR_DMIC2", "DMIC3_OUTPUT",
- "TX SWR_DMIC3", "DMIC4_OUTPUT",
- "TX SWR_DMIC4", "DMIC5_OUTPUT",
- "TX SWR_DMIC5", "DMIC6_OUTPUT",
- "TX SWR_DMIC6", "DMIC7_OUTPUT",
- "TX SWR_DMIC7", "DMIC8_OUTPUT";
-
- qcom,msm-mbhc-hphl-swh = <1>;
- qcom,msm-mbhc-gnd-swh = <1>;
-
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <0>;
-
- dai-link@0 {
- link-name = "MAX98360A";
- reg = <0>;
-
- cpu {
- sound-dai = <&lpass_cpu MI2S_SECONDARY>;
- };
-
- codec {
- sound-dai = <&max98360a>;
- };
- };
-
- dai-link@1 {
- link-name = "DisplayPort";
- reg = <1>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_DP_RX>;
- };
-
- codec {
- sound-dai = <&mdss_dp>;
- };
- };
-
- dai-link@2 {
- link-name = "WCD9385 Playback";
- reg = <2>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
- };
-
- codec {
- sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
- };
- };
-
- dai-link@3 {
- link-name = "WCD9385 Capture";
- reg = <3>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
- };
-
- codec {
- sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
- };
- };
-
- dai-link@4 {
- link-name = "DMIC";
- reg = <4>;
-
- cpu {
- sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
- };
-
- codec {
- sound-dai = <&lpass_va_macro 0>;
- };
- };
- };
};
&apps_rsc {
@@ -377,34 +279,6 @@
status = "okay";
};
-&lpass_cpu {
- status = "okay";
-
- pinctrl-names = "default";
- pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>;
-
- dai-link@1 {
- reg = <MI2S_SECONDARY>;
- qcom,playback-sd-lines = <0>;
- };
-
- dai-link@5 {
- reg = <LPASS_DP_RX>;
- };
-
- dai-link@6 {
- reg = <LPASS_CDC_DMA_RX0>;
- };
-
- dai-link@19 {
- reg = <LPASS_CDC_DMA_TX3>;
- };
-
- dai-link@25 {
- reg = <LPASS_CDC_DMA_VA_TX0>;
- };
-};
-
&lpass_rx_macro {
status = "okay";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v3 2/7] arm64: dts: qcom: sc7280: Add sound node
2023-01-19 12:27 [PATCH v3 0/7] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
2023-01-19 12:27 ` [PATCH v3 1/7] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file Srinivasa Rao Mandadapu
@ 2023-01-19 12:27 ` Srinivasa Rao Mandadapu
2023-01-19 13:26 ` Krzysztof Kozlowski
2023-01-19 12:27 ` [PATCH v3 3/7] arm64: dts: qcom: sc7280: Add LPASS PIL node Srinivasa Rao Mandadapu
` (4 subsequent siblings)
6 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-19 12:27 UTC (permalink / raw)
To: vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
Cc: Srinivasa Rao Mandadapu
Add sound node for sc7280 based audioreach platforms.
Include audioreach dtsi into crd-rev3 platform specific dts file.
Also remove phandle to sound node, as audio routing is same as
audioreach specific dtsi file.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 25 +----
.../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 109 +++++++++++++++++++++
2 files changed, 110 insertions(+), 24 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index b024626..aea8cbd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -8,7 +8,7 @@
/dts-v1/;
#include "sc7280-idp.dtsi"
-#include "sc7280-audio-idp.dtsi"
+#include "sc7280-herobrine-audioreach-wcd9385.dtsi"
#include "sc7280-idp-ec-h1.dtsi"
/ {
@@ -88,29 +88,6 @@ ap_ts_pen_1v8: &i2c13 {
pins = "gpio51";
};
-&sound {
- audio-routing =
- "IN1_HPHL", "HPHL_OUT",
- "IN2_HPHR", "HPHR_OUT",
- "AMIC1", "MIC BIAS1",
- "AMIC2", "MIC BIAS2",
- "VA DMIC0", "MIC BIAS1",
- "VA DMIC1", "MIC BIAS1",
- "VA DMIC2", "MIC BIAS3",
- "VA DMIC3", "MIC BIAS3",
- "TX SWR_ADC0", "ADC1_OUTPUT",
- "TX SWR_ADC1", "ADC2_OUTPUT",
- "TX SWR_ADC2", "ADC3_OUTPUT",
- "TX SWR_DMIC0", "DMIC1_OUTPUT",
- "TX SWR_DMIC1", "DMIC2_OUTPUT",
- "TX SWR_DMIC2", "DMIC3_OUTPUT",
- "TX SWR_DMIC3", "DMIC4_OUTPUT",
- "TX SWR_DMIC4", "DMIC5_OUTPUT",
- "TX SWR_DMIC5", "DMIC6_OUTPUT",
- "TX SWR_DMIC6", "DMIC7_OUTPUT",
- "TX SWR_DMIC7", "DMIC8_OUTPUT";
-};
-
&wcd9385 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
new file mode 100644
index 0000000..7b3f7ee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 device tree source for boards using Max98360 and wcd9385 codec
+ * along with ADSP
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+
+/{
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "SC7280-AUDIOREACH";
+ audio-routing =
+ "IN1_HPHL", "HPHL_OUT",
+ "IN2_HPHR", "HPHR_OUT",
+ "AMIC1", "MIC BIAS1",
+ "AMIC2", "MIC BIAS2",
+ "VA DMIC0", "MIC BIAS1",
+ "VA DMIC1", "MIC BIAS1",
+ "VA DMIC2", "MIC BIAS3",
+ "VA DMIC3", "MIC BIAS3",
+ "TX SWR_ADC0", "ADC1_OUTPUT",
+ "TX SWR_ADC1", "ADC2_OUTPUT",
+ "TX SWR_ADC2", "ADC3_OUTPUT",
+ "TX SWR_DMIC0", "DMIC1_OUTPUT",
+ "TX SWR_DMIC1", "DMIC2_OUTPUT",
+ "TX SWR_DMIC2", "DMIC3_OUTPUT",
+ "TX SWR_DMIC3", "DMIC4_OUTPUT",
+ "TX SWR_DMIC4", "DMIC5_OUTPUT",
+ "TX SWR_DMIC5", "DMIC6_OUTPUT",
+ "TX SWR_DMIC6", "DMIC7_OUTPUT",
+ "TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "WCD9385 Playback";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "WCD9385 Capture";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+ };
+
+ codec {
+ sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "Amplifier Playback";
+ reg = <2>;
+
+ cpu {
+ sound-dai = <&q6apmbedai SECONDARY_MI2S_RX>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+
+ dai-link@3 {
+ link-name = "DMIC";
+ reg = <3>;
+
+ cpu {
+ sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+ };
+
+ codec {
+ sound-dai = <&lpass_va_macro 0>;
+ };
+
+ platform {
+ sound-dai = <&q6apm>;
+ };
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v3 2/7] arm64: dts: qcom: sc7280: Add sound node
2023-01-19 12:27 ` [PATCH v3 2/7] arm64: dts: qcom: sc7280: Add sound node Srinivasa Rao Mandadapu
@ 2023-01-19 13:26 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-19 13:26 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Add sound node for sc7280 based audioreach platforms.
>
> Include audioreach dtsi into crd-rev3 platform specific dts file.
> Also remove phandle to sound node, as audio routing is same as
> audioreach specific dtsi file.
Your subject does not match exactly your contents. Subject says you are
adding sound node to all sc7280 boards. Commit does something else...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 3/7] arm64: dts: qcom: sc7280: Add LPASS PIL node
2023-01-19 12:27 [PATCH v3 0/7] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
2023-01-19 12:27 ` [PATCH v3 1/7] arm64: dts: qcom: sc7280: Extract audio nodes from common idp dtsi file Srinivasa Rao Mandadapu
2023-01-19 12:27 ` [PATCH v3 2/7] arm64: dts: qcom: sc7280: Add sound node Srinivasa Rao Mandadapu
@ 2023-01-19 12:27 ` Srinivasa Rao Mandadapu
2023-01-19 13:29 ` Krzysztof Kozlowski
2023-01-19 12:27 ` [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes Srinivasa Rao Mandadapu
` (3 subsequent siblings)
6 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-19 12:27 UTC (permalink / raw)
To: vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
Cc: Srinivasa Rao Mandadapu
Add LPASS PIL node for sc7280 based audioreach platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
.../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 4 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 95 ++++++++++++++++++++++
2 files changed, 99 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
index 7b3f7ee..81e0f3a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -107,3 +107,7 @@
};
};
};
+
+&remoteproc_adsp {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 6908bca..08142047 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/qcom,dispcc-sc7280.h>
#include <dt-bindings/clock/qcom,gcc-sc7280.h>
#include <dt-bindings/clock/qcom,gpucc-sc7280.h>
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
#include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
#include <dt-bindings/clock/qcom,rpmh.h>
@@ -21,6 +22,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
@@ -3439,6 +3441,99 @@
status = "disabled";
};
+ remoteproc_adsp: remoteproc@3000000 {
+ compatible = "qcom,sc7280-adsp-pil";
+ reg = <0 0x03000000 0 0x5000>, <0 0x0355b000 0 0x10>;
+ reg-names = "qdsp6ss_base", "lpass_efuse";
+
+ status = "disabled";
+ interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_NONE>,
+ <&adsp_smp2p_in 7 IRQ_TYPE_NONE>;
+
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack",
+ "shutdown-ack";
+
+ qcom,qmp = <&aoss_qmp>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CFG_NOC_LPASS_CLK>;
+
+ clock-names = "xo", "gcc_cfg_noc_lpass";
+
+ iommus = <&apps_smmu 0x1800 0x0>;
+
+ power-domains = <&rpmhpd SC7280_CX>;
+ power-domain-names = "cx";
+
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
+ <&aoss_reset AOSS_CC_LPASS_RESTART>;
+
+ reset-names = "pdc_sync", "cc_lpass";
+ qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x8000 0x13000>;
+
+ memory-region = <&adsp_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+
+ gpr {
+ compatible = "qcom,gpr";
+ qcom,glink-channels = "adsp_apps";
+ qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+ qcom,intents = <512 20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6apm: service@1 {
+ compatible = "qcom,q6apm";
+ reg = <GPR_APM_MODULE_IID>;
+ #sound-dai-cells = <0>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+
+ q6apmdai: dais {
+ compatible = "qcom,q6apm-dais";
+ iommus = <&apps_smmu 0x1801 0x0>;
+ };
+
+ q6apmbedai: bedais {
+ compatible = "qcom,q6apm-lpass-dais";
+ #sound-dai-cells = <1>;
+ };
+ };
+
+ q6prm: service@2 {
+ compatible = "qcom,q6prm";
+ reg = <GPR_PRM_MODULE_IID>;
+ qcom,protection-domain = "avs/audio",
+ "msm/adsp/audio_pd";
+ q6prmcc: clock-controller {
+ compatible = "qcom,q6prm-lpass-clocks";
+ #clock-cells = <2>;
+ };
+ };
+ };
+ };
+ };
+
remoteproc_wpss: remoteproc@8a00000 {
compatible = "qcom,sc7280-wpss-pil";
reg = <0 0x08a00000 0 0x10000>;
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v3 3/7] arm64: dts: qcom: sc7280: Add LPASS PIL node
2023-01-19 12:27 ` [PATCH v3 3/7] arm64: dts: qcom: sc7280: Add LPASS PIL node Srinivasa Rao Mandadapu
@ 2023-01-19 13:29 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-19 13:29 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Add LPASS PIL node for sc7280 based audioreach platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> ---
> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 4 +
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 95 ++++++++++++++++++++++
> 2 files changed, 99 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 7b3f7ee..81e0f3a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -107,3 +107,7 @@
> };
> };
> };
> +
> +&remoteproc_adsp {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 6908bca..08142047 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
> #include <dt-bindings/clock/qcom,gcc-sc7280.h>
> #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
> +#include <dt-bindings/clock/qcom,lpass-sc7280.h>
> #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
> #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
> #include <dt-bindings/clock/qcom,rpmh.h>
> @@ -21,6 +22,7 @@
> #include <dt-bindings/power/qcom-rpmpd.h>
> #include <dt-bindings/reset/qcom,sdm845-aoss.h>
> #include <dt-bindings/reset/qcom,sdm845-pdc.h>
> +#include <dt-bindings/soc/qcom,gpr.h>
> #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> #include <dt-bindings/sound/qcom,lpass.h>
> #include <dt-bindings/thermal/thermal.h>
> @@ -3439,6 +3441,99 @@
> status = "disabled";
> };
>
> + remoteproc_adsp: remoteproc@3000000 {
> + compatible = "qcom,sc7280-adsp-pil";
> + reg = <0 0x03000000 0 0x5000>, <0 0x0355b000 0 0x10>;
> + reg-names = "qdsp6ss_base", "lpass_efuse";
> +
> + status = "disabled";
Status is always the last property.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes
2023-01-19 12:27 [PATCH v3 0/7] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
` (2 preceding siblings ...)
2023-01-19 12:27 ` [PATCH v3 3/7] arm64: dts: qcom: sc7280: Add LPASS PIL node Srinivasa Rao Mandadapu
@ 2023-01-19 12:27 ` Srinivasa Rao Mandadapu
2023-01-19 13:31 ` Krzysztof Kozlowski
2023-01-19 12:27 ` [PATCH v3 5/7] arm64: dts: qcom: sc7280: Update lpass_tlmm node Srinivasa Rao Mandadapu
` (2 subsequent siblings)
6 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-19 12:27 UTC (permalink / raw)
To: vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
Cc: Srinivasa Rao Mandadapu
Update VA, RX and TX macro and lpass_tlmm clock properties and
enable them.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
.../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 59 ++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
index 81e0f3a..674b01a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -8,8 +8,67 @@
#include <dt-bindings/sound/qcom,q6afe.h>
+/delete-node/ &lpass_rx_macro;
+/delete-node/ &lpass_tx_macro;
+/delete-node/ &lpass_va_macro;
+
/{
/* BOARD-SPECIFIC TOP LEVEL NODES */
+ lpass_rx_macro: codec@3200000 {
+ compatible = "qcom,sc7280-lpass-rx-macro";
+ reg = <0 0x03200000 0 0x1000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
+
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_va_macro>;
+
+ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ lpass_tx_macro: codec@3220000 {
+ compatible = "qcom,sc7280-lpass-tx-macro";
+ reg = <0 0x03220000 0 0x1000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>;
+
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&lpass_va_macro>;
+
+ clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ lpass_va_macro: codec@3370000 {
+ compatible = "qcom,sc7280-lpass-va-macro";
+ reg = <0 0x03370000 0 0x1000>;
+
+ pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>;
+ pinctrl-names = "default";
+
+ clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+ clock-names = "mclk", "macro", "dcodec";
+
+ #clock-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
sound: sound {
compatible = "google,sc7280-herobrine";
model = "SC7280-AUDIOREACH";
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes
2023-01-19 12:27 ` [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes Srinivasa Rao Mandadapu
@ 2023-01-19 13:31 ` Krzysztof Kozlowski
2023-01-20 4:47 ` Srinivasa Rao Mandadapu
0 siblings, 1 reply; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-19 13:31 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Update VA, RX and TX macro and lpass_tlmm clock properties and
> enable them.
Everything is an update and this does not explain what exactly you are
updating in the nodes and why.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> ---
> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 59 ++++++++++++++++++++++
> 1 file changed, 59 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 81e0f3a..674b01a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -8,8 +8,67 @@
>
> #include <dt-bindings/sound/qcom,q6afe.h>
>
> +/delete-node/ &lpass_rx_macro;
Why?
> +/delete-node/ &lpass_tx_macro;
> +/delete-node/ &lpass_va_macro;
> +
> /{
> /* BOARD-SPECIFIC TOP LEVEL NODES */
> + lpass_rx_macro: codec@3200000 {
> + compatible = "qcom,sc7280-lpass-rx-macro";
> + reg = <0 0x03200000 0 0x1000>;
Why? They are the same.
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
Still the same...
> +
> + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&lpass_va_macro>;
> +
> + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
This is different...
> +
> + #clock-cells = <0>;
> + #sound-dai-cells = <1>;
But this not.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes
2023-01-19 13:31 ` Krzysztof Kozlowski
@ 2023-01-20 4:47 ` Srinivasa Rao Mandadapu
2023-01-20 6:24 ` Krzysztof Kozlowski
0 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-20 4:47 UTC (permalink / raw)
To: Krzysztof Kozlowski, vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
On 1/19/2023 7:01 PM, Krzysztof Kozlowski wrote:
Thanks for your time Krzysztof!!!
> On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
>> Update VA, RX and TX macro and lpass_tlmm clock properties and
>> enable them.
> Everything is an update and this does not explain what exactly you are
> updating in the nodes and why.
>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
>> ---
>> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 59 ++++++++++++++++++++++
>> 1 file changed, 59 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>> index 81e0f3a..674b01a 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>> @@ -8,8 +8,67 @@
>>
>> #include <dt-bindings/sound/qcom,q6afe.h>
>>
>> +/delete-node/ &lpass_rx_macro;
> Why?
Actually in SoC dtsi (sc7280.dtsi) power domains property used.
Which is not required for ADSP based solution. As there is no way to delete
individual property, deleting node and recreating it here.
>
>> +/delete-node/ &lpass_tx_macro;
>> +/delete-node/ &lpass_va_macro;
>> +
>> /{
>> /* BOARD-SPECIFIC TOP LEVEL NODES */
>> + lpass_rx_macro: codec@3200000 {
>> + compatible = "qcom,sc7280-lpass-rx-macro";
>> + reg = <0 0x03200000 0 0x1000>;
> Why? They are the same.
Explained above.
>
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>;
> Still the same...
>
>> +
>> + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>> + <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>> + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>> + <&lpass_va_macro>;
>> +
>> + clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
> This is different...
>
>> +
>> + #clock-cells = <0>;
>> + #sound-dai-cells = <1>;
> But this not.
>
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes
2023-01-20 4:47 ` Srinivasa Rao Mandadapu
@ 2023-01-20 6:24 ` Krzysztof Kozlowski
2023-01-20 6:35 ` Srinivasa Rao Mandadapu
0 siblings, 1 reply; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-20 6:24 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 20/01/2023 05:47, Srinivasa Rao Mandadapu wrote:
>
> On 1/19/2023 7:01 PM, Krzysztof Kozlowski wrote:
> Thanks for your time Krzysztof!!!
>> On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
>>> Update VA, RX and TX macro and lpass_tlmm clock properties and
>>> enable them.
>> Everything is an update and this does not explain what exactly you are
>> updating in the nodes and why.
>>
>>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>>> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
>>> ---
>>> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 59 ++++++++++++++++++++++
>>> 1 file changed, 59 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>> index 81e0f3a..674b01a 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>> @@ -8,8 +8,67 @@
>>>
>>> #include <dt-bindings/sound/qcom,q6afe.h>
>>>
>>> +/delete-node/ &lpass_rx_macro;
>> Why?
>
> Actually in SoC dtsi (sc7280.dtsi) power domains property used.
>
> Which is not required for ADSP based solution. As there is no way to delete
>
> individual property, deleting node and recreating it here.
>
You can delete property - delete-property. However why in AudioReach
device comes without power domains? What does it mean "power domains
property is not required"? DTS describes the hardware and the rx macro
is powered, isn't it?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes
2023-01-20 6:24 ` Krzysztof Kozlowski
@ 2023-01-20 6:35 ` Srinivasa Rao Mandadapu
2023-01-20 8:04 ` Krzysztof Kozlowski
0 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-20 6:35 UTC (permalink / raw)
To: Krzysztof Kozlowski, vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
On 1/20/2023 11:54 AM, Krzysztof Kozlowski wrote:
Thanks for your valuable suggestion Krzysztof!!!
> On 20/01/2023 05:47, Srinivasa Rao Mandadapu wrote:
>> On 1/19/2023 7:01 PM, Krzysztof Kozlowski wrote:
>> Thanks for your time Krzysztof!!!
>>> On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
>>>> Update VA, RX and TX macro and lpass_tlmm clock properties and
>>>> enable them.
>>> Everything is an update and this does not explain what exactly you are
>>> updating in the nodes and why.
>>>
>>>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>>>> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
>>>> ---
>>>> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 59 ++++++++++++++++++++++
>>>> 1 file changed, 59 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>>> index 81e0f3a..674b01a 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>>> @@ -8,8 +8,67 @@
>>>>
>>>> #include <dt-bindings/sound/qcom,q6afe.h>
>>>>
>>>> +/delete-node/ &lpass_rx_macro;
>>> Why?
>> Actually in SoC dtsi (sc7280.dtsi) power domains property used.
>>
>> Which is not required for ADSP based solution. As there is no way to delete
>>
>> individual property, deleting node and recreating it here.
>>
> You can delete property - delete-property. However why in AudioReach
> device comes without power domains? What does it mean "power domains
> property is not required"? DTS describes the hardware and the rx macro
> is powered, isn't it?
Actually in case ADSP bypass solution power domains are handled in HLOS
clock driver.
Whereas in ADSP based solution they are handled in ADSP firmware, and
from HLOS
voted as clocks.
Below is the reference commit.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9e3d83c52844f955aa2975f78cee48bf9f72f5e1
>
> Best regards,
> Krzysztof
>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes
2023-01-20 6:35 ` Srinivasa Rao Mandadapu
@ 2023-01-20 8:04 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-20 8:04 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 20/01/2023 07:35, Srinivasa Rao Mandadapu wrote:
>
> On 1/20/2023 11:54 AM, Krzysztof Kozlowski wrote:
> Thanks for your valuable suggestion Krzysztof!!!
>> On 20/01/2023 05:47, Srinivasa Rao Mandadapu wrote:
>>> On 1/19/2023 7:01 PM, Krzysztof Kozlowski wrote:
>>> Thanks for your time Krzysztof!!!
>>>> On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
>>>>> Update VA, RX and TX macro and lpass_tlmm clock properties and
>>>>> enable them.
>>>> Everything is an update and this does not explain what exactly you are
>>>> updating in the nodes and why.
>>>>
>>>>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
>>>>> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
>>>>> ---
>>>>> .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 59 ++++++++++++++++++++++
>>>>> 1 file changed, 59 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>>>> index 81e0f3a..674b01a 100644
>>>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>>>> @@ -8,8 +8,67 @@
>>>>>
>>>>> #include <dt-bindings/sound/qcom,q6afe.h>
>>>>>
>>>>> +/delete-node/ &lpass_rx_macro;
>>>> Why?
>>> Actually in SoC dtsi (sc7280.dtsi) power domains property used.
>>>
>>> Which is not required for ADSP based solution. As there is no way to delete
>>>
>>> individual property, deleting node and recreating it here.
>>>
>> You can delete property - delete-property. However why in AudioReach
>> device comes without power domains? What does it mean "power domains
>> property is not required"? DTS describes the hardware and the rx macro
>> is powered, isn't it?
>
> Actually in case ADSP bypass solution power domains are handled in HLOS
> clock driver.
>
> Whereas in ADSP based solution they are handled in ADSP firmware, and
> from HLOS
>
> voted as clocks.
>
> Below is the reference commit.
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9e3d83c52844f955aa2975f78cee48bf9f72f5e1
I am sorry, but this is one big mess. Hardware is one. I understand that
Linux drivers can be entirely different but here - and in the past with
few clocks - the hardware description keeps changing depending on the
wishes of developers. That's not how bindings and DTS work. This suggest
that DTS is being pushed to satisfy driver needs, not to properly
describe the hardware. I am sorry, but hardware does not change.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 5/7] arm64: dts: qcom: sc7280: Update lpass_tlmm node
2023-01-19 12:27 [PATCH v3 0/7] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
` (3 preceding siblings ...)
2023-01-19 12:27 ` [PATCH v3 4/7] arm64: dts: qcom: sc7280: Update VA/RX/TX macro clock nodes Srinivasa Rao Mandadapu
@ 2023-01-19 12:27 ` Srinivasa Rao Mandadapu
2023-01-19 13:33 ` Krzysztof Kozlowski
2023-01-19 12:27 ` [PATCH v3 6/7] arm64: dts: qcom: sc7280: Update qcom,adsp-pil-mode property Srinivasa Rao Mandadapu
2023-01-19 12:27 ` [PATCH v3 7/7] dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties Srinivasa Rao Mandadapu
6 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-19 12:27 UTC (permalink / raw)
To: vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
Cc: Srinivasa Rao Mandadapu
Update lpass_tlmm clock properties, as different clock sources
are required in ADSP enabled platforms
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
.../arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
index 674b01a..232e1dc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -167,6 +167,15 @@
};
};
+&lpass_tlmm {
+ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+ clock-names = "core", "audio";
+ reg = <0 0x033c0000 0x0 0x20000>,
+ <0 0x03550000 0x0 0xa100>;
+};
+
&remoteproc_adsp {
status = "okay";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v3 5/7] arm64: dts: qcom: sc7280: Update lpass_tlmm node
2023-01-19 12:27 ` [PATCH v3 5/7] arm64: dts: qcom: sc7280: Update lpass_tlmm node Srinivasa Rao Mandadapu
@ 2023-01-19 13:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-19 13:33 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Update lpass_tlmm clock properties, as different clock sources
> are required in ADSP enabled platforms
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> ---
> .../arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 674b01a..232e1dc 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -167,6 +167,15 @@
> };
> };
>
> +&lpass_tlmm {
> + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
> + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
> +
> + clock-names = "core", "audio";
> + reg = <0 0x033c0000 0x0 0x20000>,
> + <0 0x03550000 0x0 0xa100>;
What is the difference? The length of audio IO space? You need to
explain this in commit msg.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 6/7] arm64: dts: qcom: sc7280: Update qcom,adsp-pil-mode property
2023-01-19 12:27 [PATCH v3 0/7] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
` (4 preceding siblings ...)
2023-01-19 12:27 ` [PATCH v3 5/7] arm64: dts: qcom: sc7280: Update lpass_tlmm node Srinivasa Rao Mandadapu
@ 2023-01-19 12:27 ` Srinivasa Rao Mandadapu
2023-01-19 13:33 ` Krzysztof Kozlowski
2023-01-19 12:27 ` [PATCH v3 7/7] dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties Srinivasa Rao Mandadapu
6 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-19 12:27 UTC (permalink / raw)
To: vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
Cc: Srinivasa Rao Mandadapu
Add "qcom,adsp-pil-mode" property in clock nodes for herobrine
crd revision 3 board specific device tree.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
.../boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
index 232e1dc..e4afce6 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -1,4 +1,5 @@
// SPDX-License-Identifier: BSD-3-Clause
+
/*
* sc7280 device tree source for boards using Max98360 and wcd9385 codec
* along with ADSP
@@ -176,6 +177,18 @@
<0 0x03550000 0x0 0xa100>;
};
+&lpass_aon {
+ qcom,adsp-pil-mode;
+};
+
+&lpass_core {
+ qcom,adsp-pil-mode;
+};
+
+&lpasscc {
+ qcom,adsp-pil-mode;
+};
+
&remoteproc_adsp {
status = "okay";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v3 6/7] arm64: dts: qcom: sc7280: Update qcom,adsp-pil-mode property
2023-01-19 12:27 ` [PATCH v3 6/7] arm64: dts: qcom: sc7280: Update qcom,adsp-pil-mode property Srinivasa Rao Mandadapu
@ 2023-01-19 13:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-19 13:33 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Add "qcom,adsp-pil-mode" property in clock nodes for herobrine
> crd revision 3 board specific device tree.
Why? Each of your commit msgs should answer to this question.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
> ---
> .../boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> index 232e1dc..e4afce6 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
> @@ -1,4 +1,5 @@
> // SPDX-License-Identifier: BSD-3-Clause
> +
Not related, drop.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v3 7/7] dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties
2023-01-19 12:27 [PATCH v3 0/7] Add SC7280 audioreach device tree nodes Srinivasa Rao Mandadapu
` (5 preceding siblings ...)
2023-01-19 12:27 ` [PATCH v3 6/7] arm64: dts: qcom: sc7280: Update qcom,adsp-pil-mode property Srinivasa Rao Mandadapu
@ 2023-01-19 12:27 ` Srinivasa Rao Mandadapu
2023-01-19 12:33 ` Krzysztof Kozlowski
6 siblings, 1 reply; 18+ messages in thread
From: Srinivasa Rao Mandadapu @ 2023-01-19 12:27 UTC (permalink / raw)
To: vkoul, agross, andersson, robh+dt, broonie,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree, linux-kernel,
quic_rohkumar, srinivas.kandagatla, dianders, swboyd, judyhsiao,
alsa-devel, quic_rjendra, konrad.dybcio, mka
Cc: Srinivasa Rao Mandadapu
Add reg-names and power-domain-names for remoteproc ADSP pheripheral
loader. Add firmware-name property to distinguish and load different
firmware binaries of various vendors.
Change qcom,halt-regs property phandle to tcsr_1 from tcsr_mutex.
Also add required-opps property and change power domain from LCX to CX,
which is actual PD to be controlled, for setting appropriate
performance state.
This is to make compatible with remoteproc ADSP PIL driver and
latest device tree changes.
Fixes: 8490a99586ab ("dt-bindings: remoteproc: qcom: Add SC7280 ADSP support")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
---
.../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml | 30 +++++++++++++++++++---
1 file changed, 26 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
index 94ca7a0..7addc7d 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml
@@ -23,6 +23,11 @@ properties:
- description: qdsp6ss register
- description: efuse q6ss register
+ reg-names:
+ items:
+ - const: qdsp6ss_base
+ - const: lpass_efuse
+
iommus:
items:
- description: Phandle to apps_smmu node with sid mask
@@ -57,7 +62,11 @@ properties:
power-domains:
items:
- - description: LCX power domain
+ - description: CX power domain
+
+ power-domain-names:
+ items:
+ - const: cx
resets:
items:
@@ -73,6 +82,12 @@ properties:
maxItems: 1
description: Reference to the reserved-memory for the Hexagon core
+ firmware-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ The name of the firmware which should be loaded for this remote
+ processor.
+
qcom,halt-regs:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
@@ -80,7 +95,7 @@ properties:
four offsets within syscon for q6, modem, nc and qv6 halt registers.
items:
- items:
- - description: phandle to TCSR_MUTEX registers
+ - description: phandle to TCSR_1 registers
- description: offset to the Q6 halt register
- description: offset to the modem halt register
- description: offset to the nc halt register
@@ -100,6 +115,10 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
description: Reference to the AOSS side-channel message RAM.
+ required-opps:
+ description:
+ A phandle to an OPP node describing required MMCX performance point.
+
glink-edge:
$ref: qcom,glink-edge.yaml#
type: object
@@ -167,13 +186,16 @@ examples:
<&gcc GCC_CFG_NOC_LPASS_CLK>;
clock-names = "xo", "gcc_cfg_noc_lpass";
- power-domains = <&rpmhpd SC7280_LCX>;
+ power-domains = <&rpmhpd SC7280_CX>;
+ power-domain-names = "cx";
+
+ required-opps = <&rpmhpd_opp_nom>;
resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>,
<&aoss_reset AOSS_CC_LPASS_RESTART>;
reset-names = "pdc_sync", "cc_lpass";
- qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>;
+ qcom,halt-regs = <&tcsr_1 0x23000 0x25000 0x28000 0x33000>;
memory-region = <&adsp_mem>;
--
2.7.4
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v3 7/7] dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties
2023-01-19 12:27 ` [PATCH v3 7/7] dt-bindings: remoteproc: qcom: sc7280-adsp-pil: Add missing properties Srinivasa Rao Mandadapu
@ 2023-01-19 12:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 18+ messages in thread
From: Krzysztof Kozlowski @ 2023-01-19 12:33 UTC (permalink / raw)
To: Srinivasa Rao Mandadapu, vkoul, agross, andersson, robh+dt,
broonie, krzysztof.kozlowski+dt, linux-arm-msm, devicetree,
linux-kernel, quic_rohkumar, srinivas.kandagatla, dianders,
swboyd, judyhsiao, alsa-devel, quic_rjendra, konrad.dybcio, mka
On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Add reg-names and power-domain-names for remoteproc ADSP pheripheral
> loader. Add firmware-name property to distinguish and load different
> firmware binaries of various vendors.
> Change qcom,halt-regs property phandle to tcsr_1 from tcsr_mutex.
> Also add required-opps property and change power domain from LCX to CX,
> which is actual PD to be controlled, for setting appropriate
> performance state.
> This is to make compatible with remoteproc ADSP PIL driver and
> latest device tree changes.
>
> Fixes: 8490a99586ab ("dt-bindings: remoteproc: qcom: Add SC7280 ADSP support")
>
Here and in all other patches you sent recently - no blank lines between
the tags.
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> ---
> .../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml | 30 +++++++++++++++++++---
> 1 file changed, 26 insertions(+), 4 deletions(-)
>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 18+ messages in thread