[net-next PATCH v8 1/4] net: phy: aquantia: move to separate directory

[net-next PATCH v8 1/4] net: phy: aquantia: move to separate directory

[Christian Marangi]

Move aquantia PHY driver to separate driectory in preparation for
firmware loading support to keep things tidy.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes v8:
- Out of RFC
Changes v7:
- Add Reviewed-by tag
Changes v4:
- Keep order for kconfig config
Changes v3:
- Add this patch

 drivers/net/phy/Kconfig                         | 5 +----
 drivers/net/phy/Makefile                        | 6 +-----
 drivers/net/phy/aquantia/Kconfig                | 5 +++++
 drivers/net/phy/aquantia/Makefile               | 6 ++++++
 drivers/net/phy/{ => aquantia}/aquantia.h       | 0
 drivers/net/phy/{ => aquantia}/aquantia_hwmon.c | 0
 drivers/net/phy/{ => aquantia}/aquantia_main.c  | 0
 7 files changed, 13 insertions(+), 9 deletions(-)
 create mode 100644 drivers/net/phy/aquantia/Kconfig
 create mode 100644 drivers/net/phy/aquantia/Makefile
 rename drivers/net/phy/{ => aquantia}/aquantia.h (100%)
 rename drivers/net/phy/{ => aquantia}/aquantia_hwmon.c (100%)
 rename drivers/net/phy/{ => aquantia}/aquantia_main.c (100%)

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 421d2b62918f..25cfc5ded1da 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -96,10 +96,7 @@ config ADIN1100_PHY
 	  Currently supports the:
 	  - ADIN1100 - Robust,Industrial, Low Power 10BASE-T1L Ethernet PHY
 
-config AQUANTIA_PHY
-	tristate "Aquantia PHYs"
-	help
-	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+source "drivers/net/phy/aquantia/Kconfig"
 
 config AX88796B_PHY
 	tristate "Asix PHYs"
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index c945ed9bd14b..f65e85c91fc1 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -35,11 +35,7 @@ obj-y				+= $(sfp-obj-y) $(sfp-obj-m)
 obj-$(CONFIG_ADIN_PHY)		+= adin.o
 obj-$(CONFIG_ADIN1100_PHY)	+= adin1100.o
 obj-$(CONFIG_AMD_PHY)		+= amd.o
-aquantia-objs			+= aquantia_main.o
-ifdef CONFIG_HWMON
-aquantia-objs			+= aquantia_hwmon.o
-endif
-obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
+obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia/
 obj-$(CONFIG_AT803X_PHY)	+= at803x.o
 obj-$(CONFIG_AX88796B_PHY)	+= ax88796b.o
 obj-$(CONFIG_BCM54140_PHY)	+= bcm54140.o
diff --git a/drivers/net/phy/aquantia/Kconfig b/drivers/net/phy/aquantia/Kconfig
new file mode 100644
index 000000000000..226146417a6a
--- /dev/null
+++ b/drivers/net/phy/aquantia/Kconfig
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config AQUANTIA_PHY
+	tristate "Aquantia PHYs"
+	help
+	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
diff --git a/drivers/net/phy/aquantia/Makefile b/drivers/net/phy/aquantia/Makefile
new file mode 100644
index 000000000000..346f350bc084
--- /dev/null
+++ b/drivers/net/phy/aquantia/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+aquantia-objs			+= aquantia_main.o
+ifdef CONFIG_HWMON
+aquantia-objs			+= aquantia_hwmon.o
+endif
+obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o
diff --git a/drivers/net/phy/aquantia.h b/drivers/net/phy/aquantia/aquantia.h
similarity index 100%
rename from drivers/net/phy/aquantia.h
rename to drivers/net/phy/aquantia/aquantia.h
diff --git a/drivers/net/phy/aquantia_hwmon.c b/drivers/net/phy/aquantia/aquantia_hwmon.c
similarity index 100%
rename from drivers/net/phy/aquantia_hwmon.c
rename to drivers/net/phy/aquantia/aquantia_hwmon.c
diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
similarity index 100%
rename from drivers/net/phy/aquantia_main.c
rename to drivers/net/phy/aquantia/aquantia_main.c
-- 
2.40.1

[net-next PATCH v8 2/4] net: phy: aquantia: move MMD_VEND define to header

[Christian Marangi]

Move MMD_VEND define to header to clean things up and in preparation for
firmware loading support that require some define placed in
aquantia_main.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
Changes v8:
- Out of RFC
Changes v4:
- Add Reviewed-by tag
Changes v3:
- Add this patch

 drivers/net/phy/aquantia/aquantia.h       | 69 +++++++++++++++++++++++
 drivers/net/phy/aquantia/aquantia_hwmon.c | 14 -----
 drivers/net/phy/aquantia/aquantia_main.c  | 55 ------------------
 3 files changed, 69 insertions(+), 69 deletions(-)

diff --git a/drivers/net/phy/aquantia/aquantia.h b/drivers/net/phy/aquantia/aquantia.h
index c684b65c642c..f0c767c4fad1 100644
--- a/drivers/net/phy/aquantia/aquantia.h
+++ b/drivers/net/phy/aquantia/aquantia.h
@@ -9,6 +9,75 @@
 #include <linux/device.h>
 #include <linux/phy.h>
 
+/* Vendor specific 1, MDIO_MMD_VEND1 */
+#define VEND1_GLOBAL_FW_ID			0x0020
+#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
+#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
+
+/* The following registers all have similar layouts; first the registers... */
+#define VEND1_GLOBAL_CFG_10M			0x0310
+#define VEND1_GLOBAL_CFG_100M			0x031b
+#define VEND1_GLOBAL_CFG_1G			0x031c
+#define VEND1_GLOBAL_CFG_2_5G			0x031d
+#define VEND1_GLOBAL_CFG_5G			0x031e
+#define VEND1_GLOBAL_CFG_10G			0x031f
+/* ...and now the fields */
+#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
+
+/* Vendor specific 1, MDIO_MMD_VEND2 */
+#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
+#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
+#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
+#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
+#define VEND1_THERMAL_STAT1			0xc820
+#define VEND1_THERMAL_STAT2			0xc821
+#define VEND1_THERMAL_STAT2_VALID		BIT(0)
+#define VEND1_GENERAL_STAT1			0xc830
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
+
+#define VEND1_GLOBAL_GEN_STAT2			0xc831
+#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
+
+#define VEND1_GLOBAL_RSVD_STAT1			0xc885
+#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
+#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
+
+#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
+#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
+#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
+
+#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
+#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
+
+#define VEND1_GLOBAL_INT_STD_MASK		0xff00
+#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
+#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
+#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
+#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
+#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
+#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
+
+#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
+#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
+#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
+#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
+#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
+#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
+
 #if IS_REACHABLE(CONFIG_HWMON)
 int aqr_hwmon_probe(struct phy_device *phydev);
 #else
diff --git a/drivers/net/phy/aquantia/aquantia_hwmon.c b/drivers/net/phy/aquantia/aquantia_hwmon.c
index 0da451e46f69..7b3c49c3bf49 100644
--- a/drivers/net/phy/aquantia/aquantia_hwmon.c
+++ b/drivers/net/phy/aquantia/aquantia_hwmon.c
@@ -13,20 +13,6 @@
 
 #include "aquantia.h"
 
-/* Vendor specific 1, MDIO_MMD_VEND2 */
-#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
-#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
-#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
-#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
-#define VEND1_THERMAL_STAT1			0xc820
-#define VEND1_THERMAL_STAT2			0xc821
-#define VEND1_THERMAL_STAT2_VALID		BIT(0)
-#define VEND1_GENERAL_STAT1			0xc830
-#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
-#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
-#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
-#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
-
 #if IS_REACHABLE(CONFIG_HWMON)
 
 static umode_t aqr_hwmon_is_visible(const void *data,
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 334a6904ca5a..4498426e9a52 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -91,61 +91,6 @@
 #define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
 #define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
 
-/* Vendor specific 1, MDIO_MMD_VEND1 */
-#define VEND1_GLOBAL_FW_ID			0x0020
-#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
-#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
-
-#define VEND1_GLOBAL_GEN_STAT2			0xc831
-#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
-
-/* The following registers all have similar layouts; first the registers... */
-#define VEND1_GLOBAL_CFG_10M			0x0310
-#define VEND1_GLOBAL_CFG_100M			0x031b
-#define VEND1_GLOBAL_CFG_1G			0x031c
-#define VEND1_GLOBAL_CFG_2_5G			0x031d
-#define VEND1_GLOBAL_CFG_5G			0x031e
-#define VEND1_GLOBAL_CFG_10G			0x031f
-/* ...and now the fields */
-#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
-
-#define VEND1_GLOBAL_RSVD_STAT1			0xc885
-#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
-#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
-
-#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
-#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
-#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
-
-#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
-#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
-
-#define VEND1_GLOBAL_INT_STD_MASK		0xff00
-#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
-#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
-#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
-#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
-#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
-#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
-
-#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
-#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
-#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
-#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
-#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
-#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
-
 /* Sleep and timeout for checking if the Processor-Intensive
  * MDIO operation is finished
  */
-- 
2.40.1

[net-next PATCH v8 3/4] net: phy: aquantia: add firmware load support

[Christian Marangi]

From: Robert Marko <robimarko@gmail.com>

Aquantia PHY-s require firmware to be loaded before they start operating.
It can be automatically loaded in case when there is a SPI-NOR connected
to Aquantia PHY-s or can be loaded from the host via MDIO.

This patch adds support for loading the firmware via MDIO as in most cases
there is no SPI-NOR being used to save on cost.
Firmware loading code itself is ported from mainline U-boot with cleanups.

The firmware has mixed values both in big and little endian.
PHY core itself is big-endian but it expects values to be in little-endian.
The firmware is little-endian but CRC-16 value for it is stored at the end
of firmware in big-endian.

It seems the PHY does the conversion internally from firmware that is
little-endian to the PHY that is big-endian on using the mailbox
but mailbox returns a big-endian CRC-16 to verify the written data
integrity.

Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
Changes v8:
- Out of RFC
Changes v7:
- Fix additional sparse warning using __force
- Make cast to u16 for mailbox more clear
- Drop unless goto in aqr_firmware_load_fs
- Fix memory leak for missing kfree for nvmem_cell_read
Changes v4:
- Drop inline
- Drop extra impossible check for negative values
Changes v3:
- Back to RFC due to merge window
- Use unaligned macro instead of memcpy
- Spam sanity check as firmware is evil
- Add print to signal the user the source of the fw (FS or NVMEM)
Changes v2:
- Move out of RFC
- Address sanity check for offsets
- Add additional comments on firmware load check
- Fix some typo
- Capitalize CRC in comments
- Rename load_sysfs to load_fs

 drivers/net/phy/aquantia/Kconfig             |   1 +
 drivers/net/phy/aquantia/Makefile            |   2 +-
 drivers/net/phy/aquantia/aquantia.h          |  32 ++
 drivers/net/phy/aquantia/aquantia_firmware.c | 370 +++++++++++++++++++
 drivers/net/phy/aquantia/aquantia_main.c     |   6 +
 5 files changed, 410 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/phy/aquantia/aquantia_firmware.c

diff --git a/drivers/net/phy/aquantia/Kconfig b/drivers/net/phy/aquantia/Kconfig
index 226146417a6a..a35de4b9b554 100644
--- a/drivers/net/phy/aquantia/Kconfig
+++ b/drivers/net/phy/aquantia/Kconfig
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config AQUANTIA_PHY
 	tristate "Aquantia PHYs"
+	select CRC_CCITT
 	help
 	  Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
diff --git a/drivers/net/phy/aquantia/Makefile b/drivers/net/phy/aquantia/Makefile
index 346f350bc084..aa77fb63c8ec 100644
--- a/drivers/net/phy/aquantia/Makefile
+++ b/drivers/net/phy/aquantia/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-aquantia-objs			+= aquantia_main.o
+aquantia-objs			+= aquantia_main.o aquantia_firmware.o
 ifdef CONFIG_HWMON
 aquantia-objs			+= aquantia_hwmon.o
 endif
diff --git a/drivers/net/phy/aquantia/aquantia.h b/drivers/net/phy/aquantia/aquantia.h
index f0c767c4fad1..9ed38972abdb 100644
--- a/drivers/net/phy/aquantia/aquantia.h
+++ b/drivers/net/phy/aquantia/aquantia.h
@@ -10,10 +10,35 @@
 #include <linux/phy.h>
 
 /* Vendor specific 1, MDIO_MMD_VEND1 */
+#define VEND1_GLOBAL_SC				0x0
+#define VEND1_GLOBAL_SC_SOFT_RESET		BIT(15)
+#define VEND1_GLOBAL_SC_LOW_POWER		BIT(11)
+
 #define VEND1_GLOBAL_FW_ID			0x0020
 #define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
 #define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
 
+#define VEND1_GLOBAL_MAILBOX_INTERFACE1			0x0200
+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE		BIT(15)
+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE		BIT(14)
+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET	BIT(12)
+#define VEND1_GLOBAL_MAILBOX_INTERFACE1_BUSY		BIT(8)
+
+#define VEND1_GLOBAL_MAILBOX_INTERFACE2			0x0201
+#define VEND1_GLOBAL_MAILBOX_INTERFACE3			0x0202
+#define VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR_MASK	GENMASK(15, 0)
+#define VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR_MASK, (u16)((x) >> 16))
+#define VEND1_GLOBAL_MAILBOX_INTERFACE4			0x0203
+#define VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR_MASK	GENMASK(15, 2)
+#define VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR_MASK, (u16)(x))
+
+#define VEND1_GLOBAL_MAILBOX_INTERFACE5			0x0204
+#define VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA_MASK	GENMASK(15, 0)
+#define VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA_MASK, (u16)((x) >> 16))
+#define VEND1_GLOBAL_MAILBOX_INTERFACE6			0x0205
+#define VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA_MASK	GENMASK(15, 0)
+#define VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(x)	FIELD_PREP(VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA_MASK, (u16)(x))
+
 /* The following registers all have similar layouts; first the registers... */
 #define VEND1_GLOBAL_CFG_10M			0x0310
 #define VEND1_GLOBAL_CFG_100M			0x031b
@@ -28,6 +53,11 @@
 #define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
 
 /* Vendor specific 1, MDIO_MMD_VEND2 */
+#define VEND1_GLOBAL_CONTROL2			0xc001
+#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_RST	BIT(15)
+#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD	BIT(6)
+#define VEND1_GLOBAL_CONTROL2_UP_RUN_STALL	BIT(0)
+
 #define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
 #define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
 #define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
@@ -83,3 +113,5 @@ int aqr_hwmon_probe(struct phy_device *phydev);
 #else
 static inline int aqr_hwmon_probe(struct phy_device *phydev) { return 0; }
 #endif
+
+int aqr_firmware_load(struct phy_device *phydev);
diff --git a/drivers/net/phy/aquantia/aquantia_firmware.c b/drivers/net/phy/aquantia/aquantia_firmware.c
new file mode 100644
index 000000000000..c5f292b1c4c8
--- /dev/null
+++ b/drivers/net/phy/aquantia/aquantia_firmware.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/of.h>
+#include <linux/firmware.h>
+#include <linux/crc-ccitt.h>
+#include <linux/nvmem-consumer.h>
+
+#include <asm/unaligned.h>
+
+#include "aquantia.h"
+
+#define UP_RESET_SLEEP		100
+
+/* addresses of memory segments in the phy */
+#define DRAM_BASE_ADDR		0x3FFE0000
+#define IRAM_BASE_ADDR		0x40000000
+
+/* firmware image format constants */
+#define VERSION_STRING_SIZE		0x40
+#define VERSION_STRING_OFFSET		0x0200
+/* primary offset is written at an offset from the start of the fw blob */
+#define PRIMARY_OFFSET_OFFSET		0x8
+/* primary offset needs to be then added to a base offset */
+#define PRIMARY_OFFSET_SHIFT		12
+#define PRIMARY_OFFSET(x)		((x) << PRIMARY_OFFSET_SHIFT)
+#define HEADER_OFFSET			0x300
+
+struct aqr_fw_header {
+	u32 padding;
+	u8 iram_offset[3];
+	u8 iram_size[3];
+	u8 dram_offset[3];
+	u8 dram_size[3];
+} __packed;
+
+enum aqr_fw_src {
+	AQR_FW_SRC_NVMEM = 0,
+	AQR_FW_SRC_FS,
+};
+
+static const char * const aqr_fw_src_string[] = {
+	[AQR_FW_SRC_NVMEM] = "NVMEM",
+	[AQR_FW_SRC_FS] = "FS",
+};
+
+/* AQR firmware doesn't have fixed offsets for iram and dram section
+ * but instead provide an header with the offset to use on reading
+ * and parsing the firmware.
+ *
+ * AQR firmware can't be trusted and each offset is validated to be
+ * not negative and be in the size of the firmware itself.
+ */
+static bool aqr_fw_validate_get(size_t size, size_t offset, size_t get_size)
+{
+	return offset + get_size <= size;
+}
+
+static int aqr_fw_get_be16(const u8 *data, size_t offset, size_t size, u16 *value)
+{
+	if (!aqr_fw_validate_get(size, offset, sizeof(u16)))
+		return -EINVAL;
+
+	*value = get_unaligned_be16(data + offset);
+
+	return 0;
+}
+
+static int aqr_fw_get_le16(const u8 *data, size_t offset, size_t size, u16 *value)
+{
+	if (!aqr_fw_validate_get(size, offset, sizeof(u16)))
+		return -EINVAL;
+
+	*value = get_unaligned_le16(data + offset);
+
+	return 0;
+}
+
+static int aqr_fw_get_le24(const u8 *data, size_t offset, size_t size, u32 *value)
+{
+	if (!aqr_fw_validate_get(size, offset, sizeof(u8) * 3))
+		return -EINVAL;
+
+	*value = get_unaligned_le24(data + offset);
+
+	return 0;
+}
+
+/* load data into the phy's memory */
+static int aqr_fw_load_memory(struct phy_device *phydev, u32 addr,
+			      const u8 *data, size_t len)
+{
+	u16 crc = 0, up_crc;
+	size_t pos;
+
+	/* PHY expect addr in LE */
+	addr = (__force u32)cpu_to_le32(addr);
+
+	phy_write_mmd(phydev, MDIO_MMD_VEND1,
+		      VEND1_GLOBAL_MAILBOX_INTERFACE1,
+		      VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET);
+	phy_write_mmd(phydev, MDIO_MMD_VEND1,
+		      VEND1_GLOBAL_MAILBOX_INTERFACE3,
+		      VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(addr));
+	phy_write_mmd(phydev, MDIO_MMD_VEND1,
+		      VEND1_GLOBAL_MAILBOX_INTERFACE4,
+		      VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(addr));
+
+	/* We assume and enforce the size to be word aligned.
+	 * If a firmware that is not word aligned is found, please report upstream.
+	 */
+	for (pos = 0; pos < len; pos += sizeof(u32)) {
+		u32 word;
+
+		/* FW data is always stored in little-endian */
+		word = get_unaligned((const u32 *)(data + pos));
+
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE5,
+			      VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(word));
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE6,
+			      VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(word));
+
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE1,
+			      VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE |
+			      VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE);
+
+		/* calculate CRC as we load data to the mailbox.
+		 * We convert word to big-endian as PHY is BE and mailbox will
+		 * return a BE CRC.
+		 */
+		word = (__force u32)cpu_to_be32(word);
+		crc = crc_ccitt_false(crc, (u8 *)&word, sizeof(word));
+	}
+
+	up_crc = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE2);
+	if (crc != up_crc) {
+		phydev_err(phydev, "CRC mismatch: calculated 0x%04x PHY 0x%04x\n",
+			   crc, up_crc);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int aqr_fw_boot(struct phy_device *phydev, const u8 *data, size_t size,
+		       enum aqr_fw_src fw_src)
+{
+	u16 calculated_crc, read_crc, read_primary_offset;
+	u32 iram_offset = 0, iram_size = 0;
+	u32 dram_offset = 0, dram_size = 0;
+	char version[VERSION_STRING_SIZE];
+	u32 primary_offset = 0;
+	int ret;
+
+	/* extract saved CRC at the end of the fw
+	 * CRC is saved in big-endian as PHY is BE
+	 */
+	ret = aqr_fw_get_be16(data, size - sizeof(u16), size, &read_crc);
+	if (ret) {
+		phydev_err(phydev, "bad firmware CRC in firmware\n");
+		return ret;
+	}
+	calculated_crc = crc_ccitt_false(0, data, size - sizeof(u16));
+	if (read_crc != calculated_crc) {
+		phydev_err(phydev, "bad firmware CRC: file 0x%04x calculated 0x%04x\n",
+			   read_crc, calculated_crc);
+		return -EINVAL;
+	}
+
+	/* Get the primary offset to extract DRAM and IRAM sections. */
+	ret = aqr_fw_get_le16(data, PRIMARY_OFFSET_OFFSET, size, &read_primary_offset);
+	if (ret) {
+		phydev_err(phydev, "bad primary offset in firmware\n");
+		return ret;
+	}
+	primary_offset = PRIMARY_OFFSET(read_primary_offset);
+
+	/* Find the DRAM and IRAM sections within the firmware file.
+	 * Make sure the fw_header is correctly in the firmware.
+	 */
+	if (!aqr_fw_validate_get(size, primary_offset + HEADER_OFFSET,
+				 sizeof(struct aqr_fw_header))) {
+		phydev_err(phydev, "bad fw_header in firmware\n");
+		return -EINVAL;
+	}
+
+	/* offset are in LE and values needs to be converted to cpu endian */
+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
+			      offsetof(struct aqr_fw_header, iram_offset),
+			      size, &iram_offset);
+	if (ret) {
+		phydev_err(phydev, "bad iram offset in firmware\n");
+		return ret;
+	}
+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
+			      offsetof(struct aqr_fw_header, iram_size),
+			      size, &iram_size);
+	if (ret) {
+		phydev_err(phydev, "invalid iram size in firmware\n");
+		return ret;
+	}
+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
+			      offsetof(struct aqr_fw_header, dram_offset),
+			      size, &dram_offset);
+	if (ret) {
+		phydev_err(phydev, "bad dram offset in firmware\n");
+		return ret;
+	}
+	ret = aqr_fw_get_le24(data, primary_offset + HEADER_OFFSET +
+			      offsetof(struct aqr_fw_header, dram_size),
+			      size, &dram_size);
+	if (ret) {
+		phydev_err(phydev, "invalid dram size in firmware\n");
+		return ret;
+	}
+
+	/* Increment the offset with the primary offset.
+	 * Validate iram/dram offset and size.
+	 */
+	iram_offset += primary_offset;
+	if (iram_size % sizeof(u32)) {
+		phydev_err(phydev, "iram size if not aligned to word size. Please report this upstream!\n");
+		return -EINVAL;
+	}
+	if (!aqr_fw_validate_get(size, iram_offset, iram_size)) {
+		phydev_err(phydev, "invalid iram offset for iram size\n");
+		return -EINVAL;
+	}
+
+	dram_offset += primary_offset;
+	if (dram_size % sizeof(u32)) {
+		phydev_err(phydev, "dram size if not aligned to word size. Please report this upstream!\n");
+		return -EINVAL;
+	}
+	if (!aqr_fw_validate_get(size, dram_offset, dram_size)) {
+		phydev_err(phydev, "invalid iram offset for iram size\n");
+		return -EINVAL;
+	}
+
+	phydev_dbg(phydev, "primary %d IRAM offset=%d size=%d DRAM offset=%d size=%d\n",
+		   primary_offset, iram_offset, iram_size, dram_offset, dram_size);
+
+	if (!aqr_fw_validate_get(size, dram_offset + VERSION_STRING_OFFSET,
+				 VERSION_STRING_SIZE)) {
+		phydev_err(phydev, "invalid version in firmware\n");
+		return -EINVAL;
+	}
+	strscpy(version, (char *)data + dram_offset + VERSION_STRING_OFFSET,
+		VERSION_STRING_SIZE);
+	if (version[0] == '\0') {
+		phydev_err(phydev, "invalid version in firmware\n");
+		return -EINVAL;
+	}
+	phydev_info(phydev, "loading firmware version '%s' from '%s'\n", version,
+		    aqr_fw_src_string[fw_src]);
+
+	/* stall the microcprocessor */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL | VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
+
+	phydev_dbg(phydev, "loading DRAM 0x%08x from offset=%d size=%d\n",
+		   DRAM_BASE_ADDR, dram_offset, dram_size);
+	ret = aqr_fw_load_memory(phydev, DRAM_BASE_ADDR, data + dram_offset,
+				 dram_size);
+	if (ret)
+		return ret;
+
+	phydev_dbg(phydev, "loading IRAM 0x%08x from offset=%d size=%d\n",
+		   IRAM_BASE_ADDR, iram_offset, iram_size);
+	ret = aqr_fw_load_memory(phydev, IRAM_BASE_ADDR, data + iram_offset,
+				 iram_size);
+	if (ret)
+		return ret;
+
+	/* make sure soft reset and low power mode are clear */
+	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_SC,
+			   VEND1_GLOBAL_SC_SOFT_RESET | VEND1_GLOBAL_SC_LOW_POWER);
+
+	/* Release the microprocessor. UP_RESET must be held for 100 usec. */
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL |
+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD |
+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_RST);
+	usleep_range(UP_RESET_SLEEP, UP_RESET_SLEEP * 2);
+
+	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
+		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
+
+	return 0;
+}
+
+static int aqr_firmware_load_nvmem(struct phy_device *phydev)
+{
+	struct nvmem_cell *cell;
+	size_t size;
+	u8 *buf;
+	int ret;
+
+	cell = nvmem_cell_get(&phydev->mdio.dev, "firmware");
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	buf = nvmem_cell_read(cell, &size);
+	if (IS_ERR(buf)) {
+		ret = PTR_ERR(buf);
+		goto exit;
+	}
+
+	ret = aqr_fw_boot(phydev, buf, size, AQR_FW_SRC_NVMEM);
+	if (ret)
+		phydev_err(phydev, "firmware loading failed: %d\n", ret);
+
+	kfree(buf);
+exit:
+	nvmem_cell_put(cell);
+
+	return ret;
+}
+
+static int aqr_firmware_load_fs(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	const struct firmware *fw;
+	const char *fw_name;
+	int ret;
+
+	ret = of_property_read_string(dev->of_node, "firmware-name",
+				      &fw_name);
+	if (ret)
+		return ret;
+
+	ret = request_firmware(&fw, fw_name, dev);
+	if (ret) {
+		phydev_err(phydev, "failed to find FW file %s (%d)\n",
+			   fw_name, ret);
+		return ret;
+	}
+
+	ret = aqr_fw_boot(phydev, fw->data, fw->size, AQR_FW_SRC_FS);
+	if (ret)
+		phydev_err(phydev, "firmware loading failed: %d\n", ret);
+
+	release_firmware(fw);
+
+	return ret;
+}
+
+int aqr_firmware_load(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Check if the firmware is not already loaded by pooling
+	 * the current version returned by the PHY. If 0 is returned,
+	 * no firmware is loaded.
+	 */
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
+	if (ret > 0)
+		goto exit;
+
+	ret = aqr_firmware_load_nvmem(phydev);
+	if (!ret)
+		goto exit;
+
+	ret = aqr_firmware_load_fs(phydev);
+	if (ret)
+		return ret;
+
+exit:
+	return 0;
+}
diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 4498426e9a52..cc4a97741c4a 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -658,11 +658,17 @@ static int aqr107_resume(struct phy_device *phydev)
 
 static int aqr107_probe(struct phy_device *phydev)
 {
+	int ret;
+
 	phydev->priv = devm_kzalloc(&phydev->mdio.dev,
 				    sizeof(struct aqr107_priv), GFP_KERNEL);
 	if (!phydev->priv)
 		return -ENOMEM;
 
+	ret = aqr_firmware_load(phydev);
+	if (ret)
+		return ret;
+
 	return aqr_hwmon_probe(phydev);
 }
 
-- 
2.40.1

[net-next PATCH v8 4/4] dt-bindings: Document Marvell Aquantia PHY

[Christian Marangi]

Document bindings for Marvell Aquantia PHY.

The Marvell Aquantia PHY require a firmware to work correctly and there
at least 3 way to load this firmware.

Describe all the different way and document the binding "firmware-name"
to load the PHY firmware from userspace.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes v8:
- Out of RFC
Changes v7:
- Add Acked-by tag
Changes v6:
- Add Reviewed-by tag
- Drop comments in dts examples
- Improve commit title
- Fix wrong reg in example
Changes v5:
- Drop extra entry not related to HW description
Changes v3:
- Make DT description more OS agnostic
- Use custom select to fix dtbs checks
Changes v2:
- Add DT patch

 .../bindings/net/marvell,aquantia.yaml        | 116 ++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/marvell,aquantia.yaml

diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
new file mode 100644
index 000000000000..9854fab4c4db
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,aquantia.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Aquantia Ethernet PHY
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+  Marvell Aquantia Ethernet PHY require a firmware to be loaded to actually
+  work.
+
+  This can be done and is implemented by OEM in 3 different way:
+    - Attached SPI flash directly to the PHY with the firmware. The PHY
+      will self load the firmware in the presence of this configuration.
+    - Read from a dedicated partition on system NAND declared in an
+      NVMEM cell, and loaded to the PHY using its mailbox interface.
+    - Manually provided firmware loaded from a file in the filesystem.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ethernet-phy-id03a1.b445
+          - ethernet-phy-id03a1.b460
+          - ethernet-phy-id03a1.b4a2
+          - ethernet-phy-id03a1.b4d0
+          - ethernet-phy-id03a1.b4e0
+          - ethernet-phy-id03a1.b5c2
+          - ethernet-phy-id03a1.b4b0
+          - ethernet-phy-id03a1.b662
+          - ethernet-phy-id03a1.b712
+          - ethernet-phy-id31c3.1c12
+  required:
+    - compatible
+
+properties:
+  reg:
+    maxItems: 1
+
+  firmware-name:
+    description: specify the name of PHY firmware to load
+
+  nvmem-cells:
+    description: phandle to the firmware nvmem cell
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: firmware
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-id31c3.1c12",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <0>;
+            firmware-name = "AQR-G4_v5.4.C-AQR_CIG_WF-1945_0x8_ID44776_VER1630.cld";
+        };
+
+        ethernet-phy@1 {
+            compatible = "ethernet-phy-id31c3.1c12",
+                         "ethernet-phy-ieee802.3-c45";
+
+            reg = <1>;
+            nvmem-cells = <&aqr_fw>;
+            nvmem-cell-names = "firmware";
+        };
+    };
+
+    flash {
+        compatible = "jedec,spi-nor";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partitions {
+            compatible = "fixed-partitions";
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            /* ... */
+
+            partition@650000 {
+                compatible = "nvmem-cells";
+                label = "0:ethphyfw";
+                reg = <0x650000 0x80000>;
+                read-only;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                aqr_fw: aqr_fw@0 {
+                    reg = <0x0 0x5f42a>;
+                };
+            };
+
+            /* ... */
+
+        };
+    };
-- 
2.40.1

Re: [net-next PATCH v8 3/4] net: phy: aquantia: add firmware load support

[Andrew Lunn]

On Tue, Nov 14, 2023 at 03:08:43PM +0100, Christian Marangi wrote:
> From: Robert Marko <robimarko@gmail.com>
> 
> Aquantia PHY-s require firmware to be loaded before they start operating.
> It can be automatically loaded in case when there is a SPI-NOR connected
> to Aquantia PHY-s or can be loaded from the host via MDIO.
> 
> This patch adds support for loading the firmware via MDIO as in most cases
> there is no SPI-NOR being used to save on cost.
> Firmware loading code itself is ported from mainline U-boot with cleanups.
> 
> The firmware has mixed values both in big and little endian.
> PHY core itself is big-endian but it expects values to be in little-endian.
> The firmware is little-endian but CRC-16 value for it is stored at the end
> of firmware in big-endian.
> 
> It seems the PHY does the conversion internally from firmware that is
> little-endian to the PHY that is big-endian on using the mailbox
> but mailbox returns a big-endian CRC-16 to verify the written data
> integrity.
> 
> Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [net-next PATCH v8 1/4] net: phy: aquantia: move to separate directory

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Tue, 14 Nov 2023 15:08:41 +0100 you wrote:
> Move aquantia PHY driver to separate driectory in preparation for
> firmware loading support to keep things tidy.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> ---
> Changes v8:
> - Out of RFC
> Changes v7:
> - Add Reviewed-by tag
> Changes v4:
> - Keep order for kconfig config
> Changes v3:
> - Add this patch
> 
> [...]

Here is the summary with links:
  - [net-next,v8,1/4] net: phy: aquantia: move to separate directory
    https://git.kernel.org/netdev/net-next/c/d2213db3f49b
  - [net-next,v8,2/4] net: phy: aquantia: move MMD_VEND define to header
    https://git.kernel.org/netdev/net-next/c/e1fbfa4a995d
  - [net-next,v8,3/4] net: phy: aquantia: add firmware load support
    https://git.kernel.org/netdev/net-next/c/e93984ebc1c8
  - [net-next,v8,4/4] dt-bindings: Document Marvell Aquantia PHY
    https://git.kernel.org/netdev/net-next/c/0fbe92b9fd4d

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html