Re: [PATCH v3 3/3] dt-bindings: iio: light: stk33xx: add compatible for stk3013

["Rob Herring (Arm)" <robh@kernel.org>]

On Sun, 21 Jul 2024 15:44:31 +0530, Kaustabh Chakraborty wrote:
> STK3013 is a proximity sensor by Sensortek, bearing chipid of 0x31. Despite
> being marketed as a proximity sensor, it also appears to have ambient
> light sensing capabilities.
> 
> The part is fully compatible with the existing implementation of the
> device driver. Add the compatible string of stk3013 to the existing
> list, with a fallback of stk3310.
> 
> Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
> ---
>  Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 13 +++++++++----
>  1 file changed, 9 insertions(+), 4 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/iio/light/stk33xx.yaml:23:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/iio/light/stk33xx.yaml:27:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/iio/light/stk33xx.yaml:28:11: [warning] wrong indentation: expected 12 but found 10 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240721-stk3310-v3-3-98fcb6f551a1@disroot.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.