[PATCH v2] ASoC: dt-bindings: ti,pcm512x: Convert to dtschema

[PATCH v2] ASoC: dt-bindings: ti,pcm512x: Convert to dtschema

[Animesh Agarwal]

Convert the PCM512x and TAS575x audio CODECs/amplifiers bindings to DT
schema format. Add missing sound-dai-cells property.

Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>

---
Changes in v2:
  - Defined pll-in and pll-out in top-level propertirs list (outside
    conditional statements).
---
 .../devicetree/bindings/sound/pcm512x.txt     |  53 ---------
 .../devicetree/bindings/sound/ti,pcm512x.yaml | 101 ++++++++++++++++++
 2 files changed, 101 insertions(+), 53 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/pcm512x.txt
 create mode 100644 Documentation/devicetree/bindings/sound/ti,pcm512x.yaml

diff --git a/Documentation/devicetree/bindings/sound/pcm512x.txt b/Documentation/devicetree/bindings/sound/pcm512x.txt
deleted file mode 100644
index 47878a6df608..000000000000
--- a/Documentation/devicetree/bindings/sound/pcm512x.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-PCM512x and TAS575x audio CODECs/amplifiers
-
-These devices support both I2C and SPI (configured with pin strapping
-on the board). The TAS575x devices only support I2C.
-
-Required properties:
-
-  - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141",
-                 "ti,pcm5142", "ti,pcm5242", "ti,tas5754" or "ti,tas5756"
-
-  - reg : the I2C address of the device for I2C, the chip select
-          number for SPI.
-
-  - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
-    device, as covered in bindings/regulator/regulator.txt
-
-Optional properties:
-
-  - clocks : A clock specifier for the clock connected as SCLK.  If this
-    is absent the device will be configured to clock from BCLK.  If pll-in
-    and pll-out are specified in addition to a clock, the device is
-    configured to accept clock input on a specified gpio pin.
-
-  - pll-in, pll-out : gpio pins used to connect the pll using <1>
-    through <6>.  The device will be configured for clock input on the
-    given pll-in pin and PLL output on the given pll-out pin.  An
-    external connection from the pll-out pin to the SCLK pin is assumed.
-    Caution: the TAS-desvices only support gpios 1,2 and 3
-
-Examples:
-
-	pcm5122: pcm5122@4c {
-		compatible = "ti,pcm5122";
-		reg = <0x4c>;
-
-		AVDD-supply = <&reg_3v3_analog>;
-		DVDD-supply = <&reg_1v8>;
-		CPVDD-supply = <&reg_3v3>;
-	};
-
-
-	pcm5142: pcm5142@4c {
-		compatible = "ti,pcm5142";
-		reg = <0x4c>;
-
-		AVDD-supply = <&reg_3v3_analog>;
-		DVDD-supply = <&reg_1v8>;
-		CPVDD-supply = <&reg_3v3>;
-
-		clocks = <&sck>;
-		pll-in = <3>;
-		pll-out = <6>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/ti,pcm512x.yaml b/Documentation/devicetree/bindings/sound/ti,pcm512x.yaml
new file mode 100644
index 000000000000..21ea9ff5a2bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ti,pcm512x.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ti,pcm512x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCM512x and TAS575x audio CODECs/amplifiers
+
+maintainers:
+  - Animesh Agarwal <animeshagarwal28@gmail.com>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,pcm5121
+      - ti,pcm5122
+      - ti,pcm5141
+      - ti,pcm5142
+      - ti,pcm5242
+      - ti,tas5754
+      - ti,tas5756
+
+  reg:
+    maxItems: 1
+
+  AVDD-supply: true
+
+  DVDD-supply: true
+
+  CPVDD-supply: true
+
+  clocks:
+    maxItems: 1
+    description: A clock specifier for the clock connected as SCLK. If this is
+      absent the device will be configured to clock from BCLK. If pll-in and
+      pll-out are specified in addition to a clock, the device is configured to
+      accept clock input on a specified gpio pin.
+
+  '#sound-dai-cells':
+    const: 0
+
+  pll-in:
+    description: GPIO pin used to connect the pll using <1> through <6>. The
+      device will be configured for clock input on the given pll-in pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+  pll-out:
+    description: GPIO pin used to connect the pll using <1> through <6>. The
+      device will be configured for PLL output on the given pll-out pin.  An
+      external connection from the pll-out pin to the SCLK pin is assumed.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+required:
+  - compatible
+  - reg
+  - AVDD-supply
+  - DVDD-supply
+  - CPVDD-supply
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - ti,tas5754
+          - ti,tas5756
+
+then:
+  properties:
+    pll-in:
+      maximum: 3
+
+    pll-out:
+      maximum: 3
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@4c {
+            compatible = "ti,pcm5142";
+            reg = <0x4c>;
+            AVDD-supply = <&reg_3v3_analog>;
+            DVDD-supply = <&reg_1v8>;
+            CPVDD-supply = <&reg_3v3>;
+            #sound-dai-cells = <0>;
+            clocks = <&sck>;
+            pll-in = <3>;
+            pll-out = <6>;
+        };
+    };
-- 
2.45.2

Re: [PATCH v2] ASoC: dt-bindings: ti,pcm512x: Convert to dtschema

[Krzysztof Kozlowski]

On 17/07/2024 15:47, Animesh Agarwal wrote:
> Convert the PCM512x and TAS575x audio CODECs/amplifiers bindings to DT
> schema format. Add missing sound-dai-cells property.
> 
> Cc: Daniel Baluta <daniel.baluta@nxp.com>
> Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v2] ASoC: dt-bindings: ti,pcm512x: Convert to dtschema

[Mark Brown]

On Wed, 17 Jul 2024 19:17:21 +0530, Animesh Agarwal wrote:
> Convert the PCM512x and TAS575x audio CODECs/amplifiers bindings to DT
> schema format. Add missing sound-dai-cells property.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: dt-bindings: ti,pcm512x: Convert to dtschema
      commit: 00425bf8cbc9981bd975a5475cec4964544fb297

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark