From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnd Bergmann Subject: Re: [RFC v1 PATCH 1/2] of/pci: add of_pci_dma_configure() update dma configuration Date: Mon, 22 Dec 2014 23:44:52 +0100 Message-ID: <1723662.JYr5muIJha@wuerfel> References: <1418940425-2017-1-git-send-email-m-karicheri2@ti.com> <2285493.QXo0OxClZ5@wuerfel> <54989DDE.3060409@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <54989DDE.3060409@ti.com> Sender: linux-pci-owner@vger.kernel.org To: Murali Karicheri Cc: bhelgaas@google.com, linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org, grant.likely@linaro.org, robh+dt@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, will.deacon@arm.com List-Id: devicetree@vger.kernel.org On Monday 22 December 2014 17:40:30 Murali Karicheri wrote: > On 12/22/2014 05:24 PM, Arnd Bergmann wrote: > > On Monday 22 December 2014 16:40:43 Murali Karicheri wrote: > >>>> +++ b/arch/arm/mm/dma-mapping.c > >>>> @@ -2052,9 +2052,10 @@ void arch_setup_dma_ops(struct device *dev, u64 > >>>> dma_base, u64 size, > >>>> struct iommu_ops *iommu, bool coherent) > >>>> { > >>>> struct dma_map_ops *dma_ops; > >>>> + u64 temp_size = min((*(dev->dma_mask) + 1), size); > >>>> > >>>> dev->archdata.dma_coherent = coherent; > >>>> - if (arm_setup_iommu_dma_ops(dev, dma_base, size, iommu)) > >>>> + if (arm_setup_iommu_dma_ops(dev, dma_base, temp_size, iommu)) > >>>> > >>>> If you agree, I will post v1 of the patch with these updates. Let me > >>>> know. I did some basic tests on Keystone with these changes and it works > >>>> fine. > >>> > >>> It's not exactly what I meant. My main point was that we need to limit > >>> dev->dma_mask to (size-1) here, but you are not touching that. > >> > >> if you mean overriding the dev->dma_mask to min((*dev->dma_mask), > >> size-1), then I am getting the error "Coherent DMA mask 0x7fffffff (pfn > >> 0x780000-0x800000) covers a smaller range of system memory than the DMA > >> zone pfn 0x0-0x880000) when the devices on Keystone tries to set the dma > >> mask. Something wrong and I need to look into the code. > > > > Right, it sounds like the offset was applied incorrectly at some point. > > > > What are the DMA zone size and the phys-offset? > 2G and 0x8_0000_0000. This limit the usable DMA size to 2G on Keystone, > I believe you shouldn't be limiting the dma mask to size-1 in this case, > right? The DT setup the dma-range to have a size of 2G (0x80000000). No, the problem is something else: the pfn range that we calculate for the coherent DMA mask should have been 0x800000-0x880000, not 0x780000-0x800000, so we would exactly match the ZONE_DMA. Arnd