Re: [PATCH v5 1/2] dt-bindings: power: supply: Add STC3117 Fuel Gauge

["Rob Herring (Arm)" <robh@kernel.org>]

On Fri, 29 Nov 2024 17:10:45 +0530, Bhavin Sharma wrote:
> The STC3117 provides a simple fuel gauge via I2C.
> Add a DT schema to describe how to set it up in the device tree.
> 
> Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
> Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
> ---
>  .../bindings/power/supply/st,stc3117.yaml     | 81 +++++++++++++++++++
>  1 file changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/st,stc3117.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/supply/st,stc3117.yaml: properties:sense-resistor:maxItems: False schema does not allow 1
	hint: Scalar properties should not have array keywords
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
Error: Documentation/devicetree/bindings/power/supply/st,stc3117.example.dts:39.30-31 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.dtbs:129: Documentation/devicetree/bindings/power/supply/st,stc3117.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1442: dt_binding_check] Error 2
make: *** [Makefile:224: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241129114200.13351-2-bhavin.sharma@siliconsignals.io

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.