[PATCH] ARM: shmobile: porter: add QSPI DT support

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Define the Porter board dependent part of the QSPI device node.
Add device nodes  for Spansion  S25FL512S SPI flash and the MTD partitions
on it.

This patch is  mostly analogous to the commit f59838d44835 (ARM: shmobile:
henninger: add QSPI DT support) as there  are no differences between the
boards in this respect.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-20151008-v4.3-rc4' tag of Simon Horman's
'renesas.git' repo plus the Porter I2C2 and VIN0/ADV7180 patches posted earlier.

 arch/arm/boot/dts/r8a7791-porter.dts |   38 +++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-porter.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-porter.dts
+++ renesas/arch/arm/boot/dts/r8a7791-porter.dts
@@ -110,6 +110,11 @@
 		renesas,function = "sdhi2";
 	};
 
+	qspi_pins: spi0 {
+		renesas,groups = "qspi_ctrl", "qspi_data4";
+		renesas,function = "qspi";
+	};
+
 	i2c2_pins: i2c2 {
 		renesas,groups = "i2c2";
 		renesas,function = "i2c2";
@@ -165,6 +170,39 @@
 	status = "okay";
 };
 
+&qspi {
+	pinctrl-0 = <&qspi_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <30000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		partition@0 {
+			label = "loader_prg";
+			reg = <0x00000000 0x00040000>;
+			read-only;
+		};
+		partition@40000 {
+			label = "user_prg";
+			reg = <0x00040000 0x00400000>;
+			read-only;
+		};
+		partition@440000 {
+			label = "flash_fs";
+			reg = <0x00440000 0x03bc0000>;
+		};
+	};
+};
+
 &i2c2 {
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";