From: "Rob Herring (Arm)" <robh@kernel.org>
To: Ayushi Makhija <quic_amakhija@quicinc.com>
Cc: jernej.skrabec@gmail.com, quic_abhinavk@quicinc.com,
quic_rajeevny@quicinc.com, krzk+dt@kernel.org,
linux-kernel@vger.kernel.org, freedreno@lists.freedesktop.org,
neil.armstrong@linaro.org, sean@poorly.run,
devicetree@vger.kernel.org, robdclark@gmail.com,
andersson@kernel.org, dmitry.baryshkov@linaro.org,
conor+dt@kernel.org, rfoss@kernel.org,
quic_jesszhan@quicinc.com, quic_vproddut@quicinc.com,
linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
marijn.suijten@somainline.org,
Laurent.pinchart@ideasonboard.com, andrzej.hajda@intel.com,
jonas@kwiboo.se, konradybcio@kernel.org, robh+dt@kernel.org
Subject: Re: [PATCH 00/11] Add DSI display support for SA8775P target
Date: Tue, 25 Feb 2025 14:12:37 -0600 [thread overview]
Message-ID: <174051415386.2971902.3360853171203974622.robh@kernel.org> (raw)
In-Reply-To: <20250225121824.3869719-1-quic_amakhija@quicinc.com>
On Tue, 25 Feb 2025 17:48:13 +0530, Ayushi Makhija wrote:
> This series enables the support for DSI to DP bridge ports
> (labled as DSI0 and DSI1) of the Qualcomm's SA8775P Ride platform.
>
> SA8775P SoC has DSI controller v2.5.1 and DSI PHY v4.2.
> The Ride platform is having ANX7625 DSI to DP bridge chip from Analogix.
>
> Ayushi Makhija (11):
> dt-bindings: display: msm-dsi-phy-7nm: document the SA8775P DSI PHY
> dt-bindings: msm: dsi-controller-main: document the SA8775P DSI CTRL
> dt-bindings: display: msm: document DSI controller and phy on SA8775P
> drm/msm/dsi: add DSI PHY configuration on SA8775P
> drm/msm/dsi: add DSI support for SA8775P
> arm64: dts: qcom: sa8775p: add Display Serial Interface device nodes
> arm64: dts: qcom: sa8775p-ride: add anx7625 DSI to DP bridge nodes
> arm64: dts: qcom: sa8775p-ride: enable Display serial interface
> drm/bridge: anx7625: enable HPD interrupts
> drm/bridge: anx7625: update bridge_ops and sink detect logic
> drm/bridge: anx7625: change the gpiod_set_value API
>
> .../display/msm/dsi-controller-main.yaml | 1 +
> .../bindings/display/msm/dsi-phy-7nm.yaml | 1 +
> .../display/msm/qcom,sa8775p-mdss.yaml | 170 +++++++++++++++
> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 198 +++++++++++++++++-
> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 183 +++++++++++++++-
> drivers/gpu/drm/bridge/analogix/anx7625.c | 24 ++-
> drivers/gpu/drm/msm/dsi/dsi_cfg.c | 18 ++
> drivers/gpu/drm/msm/dsi/dsi_cfg.h | 1 +
> drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 2 +
> drivers/gpu/drm/msm/dsi/phy/dsi_phy.h | 1 +
> drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 27 +++
> 11 files changed, 614 insertions(+), 12 deletions(-)
>
> --
> 2.34.1
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250225121824.3869719-1-quic_amakhija@quicinc.com:
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: gpio@74: 'gpio10_cfg', 'gpio11_cfg', 'gpio2_cfg', 'gpio3_cfg' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: gpio@74: 'gpio10_cfg', 'gpio11_cfg', 'gpio2_cfg', 'gpio3_cfg' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: gpio@74: 'gpio10_cfg', 'gpio11_cfg', 'gpio2_cfg', 'gpio3_cfg' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: gpio@74: 'gpio10_cfg', 'gpio11_cfg', 'gpio2_cfg', 'gpio3_cfg' do not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: anx7625@58: 'vdd10-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: anx7625@58: 'vdd18-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dtb: anx7625@58: 'vdd33-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
prev parent reply other threads:[~2025-02-25 20:12 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-25 12:18 [PATCH 00/11] Add DSI display support for SA8775P target Ayushi Makhija
2025-02-25 12:18 ` [PATCH 01/11] dt-bindings: display: msm-dsi-phy-7nm: document the SA8775P DSI PHY Ayushi Makhija
2025-02-25 12:18 ` [PATCH 02/11] dt-bindings: msm: dsi-controller-main: document the SA8775P DSI CTRL Ayushi Makhija
2025-02-25 12:18 ` [PATCH 03/11] dt-bindings: display: msm: document DSI controller and phy on SA8775P Ayushi Makhija
2025-02-25 14:24 ` Rob Herring (Arm)
2025-02-25 12:18 ` [PATCH 04/11] drm/msm/dsi: add DSI PHY configuration " Ayushi Makhija
2025-02-25 17:14 ` Dmitry Baryshkov
2025-02-25 12:18 ` [PATCH 05/11] drm/msm/dsi: add DSI support for SA8775P Ayushi Makhija
2025-02-25 17:18 ` Dmitry Baryshkov
2025-03-04 9:30 ` Ayushi Makhija
2025-02-25 12:18 ` [PATCH 06/11] arm64: dts: qcom: sa8775p: add Display Serial Interface device nodes Ayushi Makhija
2025-02-25 13:09 ` Konrad Dybcio
2025-02-25 12:18 ` [PATCH 07/11] arm64: dts: qcom: sa8775p-ride: add anx7625 DSI to DP bridge nodes Ayushi Makhija
2025-02-25 13:10 ` Konrad Dybcio
2025-02-25 13:31 ` Krzysztof Kozlowski
2025-02-26 8:35 ` Krzysztof Kozlowski
2025-03-04 9:58 ` Ayushi Makhija
2025-02-25 17:41 ` Dmitry Baryshkov
2025-02-25 12:18 ` [PATCH 08/11] arm64: dts: qcom: sa8775p-ride: enable Display serial interface Ayushi Makhija
2025-02-25 13:11 ` Konrad Dybcio
2025-02-25 17:55 ` Dmitry Baryshkov
2025-03-04 9:44 ` Ayushi Makhija
2025-03-04 9:48 ` Dmitry Baryshkov
2025-03-04 10:13 ` Ayushi Makhija
2025-02-25 12:18 ` [PATCH 09/11] drm/bridge: anx7625: enable HPD interrupts Ayushi Makhija
2025-02-25 17:56 ` Dmitry Baryshkov
2025-02-25 12:18 ` [PATCH 10/11] drm/bridge: anx7625: update bridge_ops and sink detect logic Ayushi Makhija
2025-02-25 17:58 ` Dmitry Baryshkov
2025-02-25 20:57 ` Dmitry Baryshkov
2025-02-25 12:18 ` [PATCH 11/11] drm/bridge: anx7625: change the gpiod_set_value API Ayushi Makhija
2025-02-25 18:03 ` Dmitry Baryshkov
2025-02-25 20:12 ` Rob Herring (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=174051415386.2971902.3360853171203974622.robh@kernel.org \
--to=robh@kernel.org \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=andersson@kernel.org \
--cc=andrzej.hajda@intel.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_amakhija@quicinc.com \
--cc=quic_jesszhan@quicinc.com \
--cc=quic_rajeevny@quicinc.com \
--cc=quic_vproddut@quicinc.com \
--cc=rfoss@kernel.org \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox