Re: [PATCH v2 1/6] dt-bindings: gpio: add max77759 binding

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 26 Feb 2025 17:51:20 +0000, André Draszik wrote:
> The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
> includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
> Port Controller (TCPC), NVMEM, and a GPIO expander.
> 
> This describes its GPIO module.
> 
> Signed-off-by: André Draszik <andre.draszik@linaro.org>
> 
> ---
> v2:
> * drop 'interrupts' property and sort properties alphabetically
> ---
>  .../bindings/gpio/maxim,max77759-gpio.yaml         | 44 ++++++++++++++++++++++
>  MAINTAINERS                                        |  6 +++
>  2 files changed, 50 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/maxim,max77759.yaml
Documentation/devicetree/bindings/gpio/maxim,max77759-gpio.yaml: Documentation/devicetree/bindings/mfd/maxim,max77759.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250226-max77759-mfd-v2-1-a65ebe2bc0a9@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.