Re: [PATCH v2 1/2] dt-bindings: regulator: add pca9450: Add regulator-allowed-modes

["Rob Herring (Arm)" <robh@kernel.org>]

On Fri, 23 May 2025 15:12:11 +0200, Martijn de Gouw wrote:
> Make the PWM mode on the buck controllers configurable from devicetree.
> Some boards require forced PWM mode to keep the supply ripple within
> acceptable limits under light load conditions.
> 
> Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
> ---
> Changes in v2:
>   - Add the header to the binding patch
>   - Improve commit message
> 
>  .../regulator/nxp,pca9450-regulator.yaml       | 14 ++++++++++++++
>  .../regulator/nxp,pca9450-regulator.h          | 18 ++++++++++++++++++
>  2 files changed, 32 insertions(+)
>  create mode 100644 include/dt-bindings/regulator/nxp,pca9450-regulator.h
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.example.dtb: pmic@25 (nxp,pca9450b): regulators:BUCK4: Unevaluated properties are not allowed ('regulator-inital-mode' was unexpected)
	from schema $id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250523131214.955970-1-martijn.de.gouw@prodrive-technologies.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.