From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: Enric Balletbo i Serra
<enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Cc: MyungJoo Ham
<myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
briannorris-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 2/3] arm64: dts: rockchip: add usb3-phy phandle for dwc3.
Date: Wed, 06 Dec 2017 12:20:06 +0100 [thread overview]
Message-ID: <1756641.7q7fHBPi13@diego> (raw)
In-Reply-To: <20171206111008.3079-2-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
Am Mittwoch, 6. Dezember 2017, 12:10:07 CET schrieb Enric Balletbo i Serra:
> This patch adds the usb3-phy for both of the two dwc3 controllers on
> rk3399.
This patch adds quite a bit more than the phy phandles though.
The powerdomain addition should definitly be a separate patch
and the usb3-grf clock as well.
Heiko
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> ---
> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 28 ++++++++++++++++++++--------
> 1 file changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 17e5e1a..c18ff88 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -397,9 +397,11 @@
> #size-cells = <2>;
> ranges;
> clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
> - <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
> + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
> + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
> clock-names = "ref_clk", "suspend_clk",
> - "bus_clk", "grf_clk";
> + "bus_clk", "aclk_usb3_rksoc_axi_perf",
> + "aclk_usb3", "grf_clk";
> status = "disabled";
>
> usbdrd_dwc3_0: dwc3 {
> @@ -407,14 +409,15 @@
> reg = <0x0 0xfe800000 0x0 0x100000>;
> interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
> dr_mode = "otg";
> - phys = <&u2phy0_otg>;
> - phy-names = "usb2-phy";
> + phys = <&u2phy0_otg>, <&tcphy0_usb3>;
> + phy-names = "usb2-phy", "usb3-phy";
> phy_type = "utmi_wide";
> snps,dis_enblslpm_quirk;
> snps,dis-u2-freeclk-exists-quirk;
> snps,dis_u2_susphy_quirk;
> snps,dis-del-phy-power-chg-quirk;
> snps,dis-tx-ipgap-linecheck-quirk;
> + power-domains = <&power RK3399_PD_USB3>;
> status = "disabled";
> };
> };
> @@ -425,9 +428,11 @@
> #size-cells = <2>;
> ranges;
> clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
> - <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
> + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
> + <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
> clock-names = "ref_clk", "suspend_clk",
> - "bus_clk", "grf_clk";
> + "bus_clk", "aclk_usb3_rksoc_axi_perf",
> + "aclk_usb3", "grf_clk";
> status = "disabled";
>
> usbdrd_dwc3_1: dwc3 {
> @@ -435,14 +440,15 @@
> reg = <0x0 0xfe900000 0x0 0x100000>;
> interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
> dr_mode = "otg";
> - phys = <&u2phy1_otg>;
> - phy-names = "usb2-phy";
> + phys = <&u2phy1_otg>, <&tcphy1_usb3>;
> + phy-names = "usb2-phy", "usb3-phy";
> phy_type = "utmi_wide";
> snps,dis_enblslpm_quirk;
> snps,dis-u2-freeclk-exists-quirk;
> snps,dis_u2_susphy_quirk;
> snps,dis-del-phy-power-chg-quirk;
> snps,dis-tx-ipgap-linecheck-quirk;
> + power-domains = <&power RK3399_PD_USB3>;
> status = "disabled";
> };
> };
> @@ -991,6 +997,12 @@
> clocks = <&cru HCLK_SDIO>;
> pm_qos = <&qos_sdioaudio>;
> };
> + pd_usb3@RK3399_PD_USB3 {
> + reg = <RK3399_PD_USB3>;
> + clocks = <&cru ACLK_USB3>;
> + pm_qos = <&qos_usb_otg0>,
> + <&qos_usb_otg1>;
> + };
> pd_vio@RK3399_PD_VIO {
> reg = <RK3399_PD_VIO>;
> #address-cells = <1>;
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-06 11:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20171206111048epcas3p2b412288717b0f8197c85edaab5c9a242@epcas3p2.samsung.com>
2017-12-06 11:10 ` [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables Enric Balletbo i Serra
2017-12-06 11:10 ` [PATCH 2/3] arm64: dts: rockchip: add usb3-phy phandle for dwc3 Enric Balletbo i Serra
[not found] ` <20171206111008.3079-2-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-12-06 11:20 ` Heiko Stübner [this message]
2017-12-06 11:27 ` Enric Balletbo i Serra
[not found] ` <20171206111008.3079-1-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-12-06 11:10 ` [PATCH 3/3] arm64: dts: rockchip: add extcon nodes and enable tcphy Enric Balletbo i Serra
[not found] ` <20171206111008.3079-3-enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-12-06 17:29 ` Brian Norris
[not found] ` <20171206172919.GA87458-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
2017-12-13 10:28 ` Enric Balletbo Serra
2017-12-07 2:12 ` [PATCH 1/3] extcon: usbc-cros-ec: add support to notify USB type cables Chanwoo Choi
2017-12-06 15:43 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1756641.7q7fHBPi13@diego \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=briannorris-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=enric.balletbo-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org \
--cc=groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).