Re: [PATCH 0/6] ARM: dts: rockchip: Add BQ Edison2 QuadCore tablet

[Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>]

Am Dienstag, 13. November 2018, 14:05:53 CET schrieb Heiko Stuebner:
> Add a devicetree for the BQ Edison2 tablet from MundoReader.
> Incidentially this is the device I wanted to run mainline Linux
> on when starting the Rockchip port - thinking, "this can't take
> thaaat long" ;-) - so I've come somewhat full-circle now.
> 
> With Lima it can also use gpu acceleration for gles2.
> 
> Notable absent peripherals are the touchscreen (ft5606),
> IT66121 hdmi bridge (internal panel is working nicely) and sound.
> All areas I'm still trying to get working.
> 
> The series includes some smallish cleanups before the board
> with cleaning up the cpu-core nodes being a big part.
> 
> And there are a number of driver-side additions pending that
> should get accepted before the board itself can go in.
> (bq24196, Innolux panel, tmp108-interrupt).
> 
> 
> Heiko Stuebner (6):
>   ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s
>   ARM: dts: rockchip: convert rk3188 to opp-v2
>   ARM: dts: rockchip: add cpu-core resets for rk3188
>   ARM: dts: rockchip: add phandles to secondary cpu cores
>   ARM: dts: rockchip: update cpu supplies on rk3188

applied the general cleanups from patch 1-5 for 4.21 now.


>   ARM: dts: rockchip: add BQ Edison 2 QC devicetree

this one gets a bit more time for possible dt-maintainer Review of the
small binding addition.