From: "Rob Herring (Arm)" <robh@kernel.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, imx@lists.linux.dev,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Conor Dooley <conor+dt@kernel.org>,
David Lechner <dlechner@baylibre.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org
Subject: Re: [PATCH 0/2] dts: imx: cleanup warning cause by fsl,mpl3115
Date: Thu, 23 Oct 2025 08:51:58 -0500 [thread overview]
Message-ID: <176122700723.2723267.1526103667842275891.robh@kernel.org> (raw)
In-Reply-To: <20251022-fsl-mpl3115-v1-0-93187d095efc@nxp.com>
On Wed, 22 Oct 2025 16:43:20 -0400, Frank Li wrote:
> After commit f11e4374b(dt-bindings: iio: pressure: add binding for mpl3115 )
> vdd-supply and vddio-supply is required properties.
>
> thread:
> https://lore.kernel.org/imx/0e00bb14-19c7-493a-9629-354bac3a273e@baylibre.com/T/#t
> not prefer change both to optional. So update dts to fix CHECK_DTB
> warnings for both ARM and ARM64 platform.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Frank Li (2):
> arm64: dts: imx8: add vdd-supply and vddio-supply for fsl,mpl3115
> ARM: dts: imx: add vdd-supply and vddio-supply for fsl,mpl3115
>
> arch/arm/boot/dts/nxp/imx/imx53-ppd.dts | 2 ++
> arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi | 3 ++-
> arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 4 ++++
> arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts | 2 ++
> arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 2 ++
> arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts | 2 ++
> arch/arm/boot/dts/nxp/imx/imx7s-warp.dts | 9 +++++++++
> arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 9 +++++++++
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 9 +++++++++
> 9 files changed, 41 insertions(+), 1 deletion(-)
> ---
> base-commit: c31b21db1c04ba719c3889a57873f0f7eff54670
> change-id: 20251022-fsl-mpl3115-3bb541a56122
>
> Best regards,
> --
> Frank Li <Frank.Li@nxp.com>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: base-commit c31b21db1c04ba719c3889a57873f0f7eff54670 not known, ignoring
Base: attempting to guess base-commit...
Base: tags/v6.18-rc1-10-gc35cf4fe4b85 (exact match)
Base: tags/v6.18-rc1-10-gc35cf4fe4b85 (use --merge-base to override)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/nxp/' for 20251022-fsl-mpl3115-v1-0-93187d095efc@nxp.com:
arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx7d-sdb.dtb: mpl3115@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dtb: mpl3115@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dtb: mpl3115@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx7d-sdb-reva.dtb: mpl3115@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx7s-warp.dtb: mpl3115@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx7d-sdb-sht11.dtb: mpl3115@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dtb: mpl3115@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply', 'vddio-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/trivial-devices.yaml
next prev parent reply other threads:[~2025-10-23 13:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-22 20:43 [PATCH 0/2] dts: imx: cleanup warning cause by fsl,mpl3115 Frank Li
2025-10-22 20:43 ` [PATCH 1/2] arm64: dts: imx8: add vdd-supply and vddio-supply for fsl,mpl3115 Frank Li
2025-10-22 20:43 ` [PATCH 2/2] ARM: dts: imx: " Frank Li
2025-10-23 13:51 ` Rob Herring (Arm) [this message]
2025-11-11 7:32 ` [PATCH 0/2] dts: imx: cleanup warning cause by fsl,mpl3115 Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=176122700723.2723267.1526103667842275891.robh@kernel.org \
--to=robh@kernel.org \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).