devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Joakim Zhang <qiangqing.zhang@nxp.com>,
	robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de
Cc: kernel@pengutronix.de, linux-imx@nxp.com, victor.liu@nxp.com,
	peng.fan@nxp.com, linux-can@vger.kernel.org,
	pankaj.bansal@nxp.com, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/6] can: flexcan: fix ECC function on LS1021A/LX2160A
Date: Fri, 16 Oct 2020 08:04:50 +0200	[thread overview]
Message-ID: <17678245-34fb-face-92ed-f32cd7423053@pengutronix.de> (raw)
In-Reply-To: <20201016134320.20321-7-qiangqing.zhang@nxp.com>


[-- Attachment #1.1: Type: text/plain, Size: 3103 bytes --]

On 10/16/20 3:43 PM, Joakim Zhang wrote:
> After double check with Layerscape CAN owner (Pankaj Bansal), confirm
> that LS1021A doesn't support ECC, and LX2160A indeed supports ECC.
> 
> For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
> disable non-correctable errors interrupt and freeze mode, had better use
> FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.
> 
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
>  drivers/net/can/flexcan.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> index a55ea8f27f7c..7b0eb608fc9d 100644
> --- a/drivers/net/can/flexcan.c
> +++ b/drivers/net/can/flexcan.c
> @@ -219,7 +219,7 @@
>   *   MX8MP FlexCAN3  03.00.17.01    yes       yes        no      yes       yes          yes
>   *   VF610 FlexCAN3  ?               no       yes        no      yes       yes?          no
>   * LS1021A FlexCAN2  03.00.04.00     no       yes        no       no       yes           no
> - * LX2160A FlexCAN3  03.00.23.00     no       yes        no       no       yes          yes
> + * LX2160A FlexCAN3  03.00.23.00     no       yes        no      yes       yes          yes
>   *
>   * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
>   */
> @@ -408,19 +408,19 @@ static struct flexcan_devtype_data fsl_imx8mp_devtype_data = {
>  static const struct flexcan_devtype_data fsl_vf610_devtype_data = {
>  	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
>  		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP |
> -		FLEXCAN_QUIRK_BROKEN_PERR_STATE,
> +		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_SUPPORT_ECC,

You add the missing ECC init for vf610, but don't mention it in the patch
subject nor description. Please make this a seperate patch and add a Fixes: line.

>  };
>  
>  static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
>  	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
> -		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
> -		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
> +		FLEXCAN_QUIRK_BROKEN_PERR_STATE | FLEXCAN_QUIRK_USE_OFF_TIMESTAMP,
>  };

Please make this a seperate patch, too, along with the Fixes line.

>  static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
>  	.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
>  		FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
> -		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD,
> +		FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD |
> +		FLEXCAN_QUIRK_SUPPORT_ECC,
>  };
>  
>  static const struct can_bittiming_const flexcan_bittiming_const = {
> 


-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

  reply	other threads:[~2020-10-16  6:05 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 13:43 [PATCH 0/6] can: flexcan: add stop mode support for i.MX8QM Joakim Zhang
2020-10-16 13:43 ` [PATCH 1/6] firmware: imx: always export SCU symbols Joakim Zhang
2020-10-16 13:43 ` [PATCH 2/6] dt-bindings: can: flexcan: fix fsl,clk-source property Joakim Zhang
2020-10-16  6:21   ` Marc Kleine-Budde
2020-10-16  6:52     ` Joakim Zhang
2020-10-16 13:43 ` [PATCH 3/6] dt-bindings: can: flexcan: add fsl,can-index property to indicate a resource Joakim Zhang
2020-10-16  6:20   ` [PATCH 3/6] dt-bindings: can: flexcan: add fsl, can-index " Marc Kleine-Budde
2020-10-16  6:52     ` Joakim Zhang
2020-10-16  7:47       ` Marc Kleine-Budde
2020-10-16 13:43 ` [PATCH 4/6] can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR Joakim Zhang
2020-10-16  6:22   ` Marc Kleine-Budde
2020-10-16 13:43 ` [PATCH 5/6] can: flexcan: add CAN wakeup function for i.MX8QM Joakim Zhang
2020-10-16  5:59   ` Marc Kleine-Budde
2020-10-16  6:46     ` Joakim Zhang
2020-10-16  7:44       ` Marc Kleine-Budde
2020-10-16  6:18   ` Marc Kleine-Budde
2020-10-16  6:51     ` Joakim Zhang
2020-10-16 10:00       ` Joakim Zhang
2020-10-16 10:40         ` Marc Kleine-Budde
2020-10-16 10:57           ` Joakim Zhang
2020-10-16 13:43 ` [PATCH 6/6] can: flexcan: fix ECC function on LS1021A/LX2160A Joakim Zhang
2020-10-16  6:04   ` Marc Kleine-Budde [this message]
2020-10-16  6:49     ` Joakim Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17678245-34fb-face-92ed-f32cd7423053@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pankaj.bansal@nxp.com \
    --cc=peng.fan@nxp.com \
    --cc=qiangqing.zhang@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=victor.liu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).