[PATCH v3 0/4] hwmon: (sht3x) Add support for GXCAS GXHT30

[Zaixiang Xu <zaixiang.xu.dev@gmail.com>]

This series adds support for the GXCAS GXHT30 humidity and temperature 
sensor. The GXHT30 is software compatible with the Sensirion SHT30 series.

This series also introduces the missing YAML binding schema for the
Sensirion SHT30 family, replacing wildcards with specific model names.

Changes in v3:
- Split driver changes into two patches: one for DT framework and one 
  for adding GXHT30 (suggested by Guenter Roeck).
- Fixed commit message line lengths (suggested by Guenter Roeck).
- Removed wildcards 'x' from compatibles, used specific model names,
  and renamed the binding file to sensirion,sht30.yaml 
  (suggested by Conor Dooley).
- Added manufacturer website to vendor-prefix patch and included 
  Acked-by from Conor Dooley.
- Fixed missing newline at end of YAML file (reported by kernel test robot).

Changes in v2:
- Fix placeholder "Your Name" in MODULE_AUTHOR.

Zaixiang Xu (4):
  dt-bindings: vendor-prefixes: Add GXCAS Technology
  dt-bindings: hwmon: Add Sensirion SHT30 series
  hwmon: (sht3x) Add devicetree support
  hwmon: (sht3x) Add support for GXCAS GXHT30

 Documentation/devicetree/bindings/hwmon/sensirion,sht30.yaml | 44 ++++++++++++++++++++
 Documentation/devicetree/bindings/vendor-prefixes.yaml       |  2 +
 drivers/hwmon/sht3x.c                                        | 16 +++++++-
 3 files changed, 61 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/hwmon/sensirion,sht30.yaml


-- 
2.34.1