From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 5925D3ED3A6; Mon, 25 May 2026 14:25:48 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=213.167.242.64 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779719153; cv=none; b=XgOvZdWyQYKp+QUcfq2ZkU8gcAL+/pTMM0wn4gNTPv1GsZyVzHOFa3DvAwm/54zRoPpeD4q5ZXjR5DfrMNL8kt+SIzQhFirEXumQSXDLumFJG7rj9zEezdYxrgpv6MI4zRPpswuwqULwhjHIFXV5PdudIETA1g1r/snnVkbEBjM= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1779719153; c=relaxed/simple; bh=V3RXhQiJsjp7w9HPTUyCq67XD+/QNEDjLqJo66S30lo=; h=Content-Type:MIME-Version:In-Reply-To:References:Subject:From:Cc: To:Date:Message-ID; b=YzHQWp7jGJeoUzN9ZsXzBcrRWquEfPeEDlNTqgnVXlP1nqcxxNPuWCqYxLK+ZimS0tXeZGMqWT8a06Vcb7s/kBQUVf+KXOV7ShahwVCgaEeNQLaDPlL2Ntgv/Mlv24RLgE0AEjpSvMUdfUf9bazzEJAAweqXNvcLWk3YmFBQjFI= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=ideasonboard.com; spf=pass smtp.mailfrom=ideasonboard.com; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b=uHczCGPm; arc=none smtp.client-ip=213.167.242.64 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=ideasonboard.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ideasonboard.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="uHczCGPm" Received: from mail.ideasonboard.com (unknown [IPv6:2a01:cb1d:8f2:800:ad48:920a:da6f:a034]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 07A99A2F; Mon, 25 May 2026 16:25:28 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1779719129; bh=V3RXhQiJsjp7w9HPTUyCq67XD+/QNEDjLqJo66S30lo=; h=In-Reply-To:References:Subject:From:Cc:To:Date:From; b=uHczCGPmuVpW/Fr+dy8yyEDF2BWoZsm2EnWaNlI2b69gQUaeq/jgWBOiB766ipFqx P5g2W7uNkZ7QjB7zW1pRGyN+lefk3s1yNcx5y87XbTl4wenRsgvb+jkRL01fx1yidK uS3H9vK+XTkGtT4uaprBmx389XnLfjA437v83DQY= Content-Type: text/plain; charset="utf-8" Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable In-Reply-To: References: <20260520-imx678-v3-0-8b5f9676486e@ideasonboard.com> <20260520-imx678-v3-2-8b5f9676486e@ideasonboard.com> Subject: Re: [PATCH v3 2/2] media: i2c: imx678: Add driver for Sony IMX678 From: Jai Luthra Cc: Mauro Carvalho Chehab , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Laurent Pinchart , Kieran Bingham , Lachlan Michael , Ryuichi Tadano , Kengo Hayasaka , linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org To: Sakari Ailus Date: Mon, 25 May 2026 16:25:42 +0200 Message-ID: <177971914277.2341049.16987956693773109448@selene> User-Agent: alot/0.12.dev70+g31692a239 Hi Sakari, Thanks for the review. Quoting Sakari Ailus (2026-05-21 13:12:43) > Hi Jai, >=20 > Thanks for the set. >=20 > On Wed, May 20, 2026 at 05:17:26PM +0200, Jai Luthra wrote: > > Add a V4L2 subdev driver for the Sony IMX678 image sensor. > >=20 > > IMX678 is a diagonal 8.86 mm (Type 1/1.8) CMOS active pixel type > > solid-state image sensor with a square pixel array and 8.40 M effective > > pixels. > >=20 > > The following features are supported by the driver: > > - Monochrome and Color (Bayer filter) variants > > - Multiple input clock frequencies supported > > - Multiple link frequencies supported > > - VBLANK and HBLANK control for variable framerate > > - Freely configurable crop rectangle through S_SELECTION ioctl > > - Configurable resolution with 2x2 binning (for the current crop) > > through S_FMT ioctl > > - VFLIP and HFLIP control for flipping readout > > - Test pattern control support > > - Exposure and gain control > > - MIPI RAW12 output > >=20 > > Following features are not currently supported but may be added later: > > - Pixel-perfect crop reporting, account for the shift-by-1 when flipping > > using HFLIP/VFLIP, which maintains the bayer readout order > > - Increased framerate (lower HMAX/VMAX) when cropping > > - MIPI RAW10 output mode > > - Embedded data stream > >=20 > > Signed-off-by: Jai Luthra > > --- > > Changes in v3: > > - Use `reset-gpios`instead of `xclr-gpios`, inverting the logic in > > driver > > - Update minimum crop width and height according to the PIX_[HV]WIDTH > > register limits > > - Expect the user to first select a crop rectangle using S_SELECTION, > > and then choose one of two sizes (non-binned or binned) in S_FMT. This > > matches what IMX296 already does, simplifying the selection logic > > quite a bit. > > - Enumerate only the frame sizes possible for the current crop rectangle > > in ENUM_FRAMESIZES > >=20 > > Changes in v2: > > - Treat the pixel rate as a fixed sensor property rather than deriving > > it from link frequency and bit depth. Removes the iclk<->pixel > > conversion helpers, instead using a fixed 8x ratio. > > - Express HBLANK in pixels with a step of 8. > > - Make VBLANK step =3D 2 and rewrite the exposure register when VBLANK > > changes, so the effective exposure does not silently shift. > > - Fix power sequencing: hold the sensor in reset until power_on, add the > > missing post-reset delay, and disable the clock before the regulators > > on power_off. > > - Drop the "common regs written" flag, program them in power_on. > > - Add variant match data and cross-check the register-reported type > > against DT; rename detect() to identify_model(). > > - Use v4l2_link_freq_to_bitmap() and expose the full link frequency menu > > with the configured one as the selected RO option. > > - Drop unused includes and defines, misc cleanups > > - Kconfig: depend on OF_GPIO > > --- > > MAINTAINERS | 1 + > > drivers/media/i2c/Kconfig | 11 + > > drivers/media/i2c/Makefile | 1 + > > drivers/media/i2c/imx678.c | 1599 ++++++++++++++++++++++++++++++++++++= ++++++++ > > 4 files changed, 1612 insertions(+) > >=20 > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 6b368345a771..2cc6913fa058 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -24916,6 +24916,7 @@ M: Jai Luthra > > L: linux-media@vger.kernel.org > > S: Maintained > > F: Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml > > +F: drivers/media/i2c/imx678.c > > =20 > > SONY MEMORYSTICK SUBSYSTEM > > M: Maxim Levitsky > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig > > index 8f2ba4121586..26b938466825 100644 > > --- a/drivers/media/i2c/Kconfig > > +++ b/drivers/media/i2c/Kconfig > > @@ -287,6 +287,17 @@ config VIDEO_IMX415 > > To compile this driver as a module, choose M here: the > > module will be called imx415. > > =20 > > +config VIDEO_IMX678 > > + tristate "Sony IMX678 sensor support" > > + depends on OF_GPIO >=20 > Maybe >=20 > depends on GPIOLIB >=20 > instead? >=20 Ack. > > + select V4L2_CCI_I2C > > + help > > + This is a Video4Linux2 sensor driver for the Sony > > + IMX678 camera. > > + > > + To compile this driver as a module, choose M here: the > > + module will be called imx678. > > + > > config VIDEO_MAX9271_LIB > > tristate > > =20 > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile > > index 90b276a7417a..d9d9a6512875 100644 > > --- a/drivers/media/i2c/Makefile > > +++ b/drivers/media/i2c/Makefile > > @@ -61,6 +61,7 @@ obj-$(CONFIG_VIDEO_IMX335) +=3D imx335.o > > obj-$(CONFIG_VIDEO_IMX355) +=3D imx355.o > > obj-$(CONFIG_VIDEO_IMX412) +=3D imx412.o > > obj-$(CONFIG_VIDEO_IMX415) +=3D imx415.o > > +obj-$(CONFIG_VIDEO_IMX678) +=3D imx678.o > > obj-$(CONFIG_VIDEO_IR_I2C) +=3D ir-kbd-i2c.o > > obj-$(CONFIG_VIDEO_ISL7998X) +=3D isl7998x.o > > obj-$(CONFIG_VIDEO_KS0127) +=3D ks0127.o > > diff --git a/drivers/media/i2c/imx678.c b/drivers/media/i2c/imx678.c > > new file mode 100644 > > index 000000000000..5ac710b7e38b > > --- /dev/null > > +++ b/drivers/media/i2c/imx678.c > > @@ -0,0 +1,1599 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * V4L2 driver for Sony IMX678 > > + * > > + * Diagonal 8.86 mm (Type 1/1.8) CMOS image sensor with 8.40 M effecti= ve pixels. > > + * > > + * Copyright (C) 2026 Ideas On Board Oy. > > + * > > + * Based on Sony IMX678 driver prepared by Will Whang & Soho Enterpris= e Ltd. > > + */ > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include >=20 > #include >=20 Ack. > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +/* Standby or streaming mode */ > > +#define IMX678_REG_MODE_SELECT CCI_REG8(0x3000) > > +#define IMX678_MODE_STANDBY 0x01 > > +#define IMX678_MODE_STREAMING 0x00 > > +#define IMX678_STREAM_DELAY_US 25000 > > +#define IMX678_STREAM_DELAY_RANGE_US 1000 > > + > > +/* XVS/XHS sync control */ > > +#define IMX678_REG_XMSTA CCI_REG8(0x3002) > > +#define IMX678_REG_XXS_DRV CCI_REG8(0x30A6) > > +#define IMX678_REG_XXS_OUTSEL CCI_REG8(0x30A4) > > + > > +/* Clk selection */ > > +#define IMX678_REG_INCK_SEL CCI_REG8(0x3014) > > + > > +/* Link Speed */ > > +#define IMX678_REG_DATARATE_SEL CCI_REG8(0x3015) > > + > > +/* Lane Count */ > > +#define IMX678_REG_LANEMODE CCI_REG8(0x3040) > > + > > +/* > > + * The internal readout clock runs at 74.25 Hz. In one cycle the AD re= ads 8 > > + * pixels, thus giving us a rate of 74.25 * 8 =3D 594 MPix/s > > + */ > > +#define IMX678_PIXEL_RATE 594000000 > > +#define IMX678_PIX_PER_CLK 8 > > + > > +/* VMAX - Frame Length in Lines */ > > +#define IMX678_REG_VMAX CCI_REG24_LE(0x3028) > > +#define IMX678_VMAX_MAX 0xfffff > > +#define IMX678_VMAX_DEFAULT 2250 > > + > > +/* HMAX - Line Length in Cycles (8 Pixels) */ > > +#define IMX678_REG_HMAX CCI_REG16_LE(0x302C) > > +#define IMX678_HMAX_MAX 0xffff > > + > > +/* SHR internal */ > > +#define IMX678_REG_SHR CCI_REG24_LE(0x3050) > > +#define IMX678_SHR_MIN 8 > > + > > +/* Exposure control */ > > +#define IMX678_EXPOSURE_MIN 2 > > +#define IMX678_EXPOSURE_STEP 1 > > +#define IMX678_EXPOSURE_DEFAULT 1000 > > + > > +/* Analog gain control */ > > +#define IMX678_REG_ANALOG_GAIN CCI_REG16_LE(0x3070) > > +#define IMX678_ANA_GAIN_MIN_NORMAL 0 > > +#define IMX678_ANA_GAIN_MAX_NORMAL 240 > > +#define IMX678_ANA_GAIN_STEP 1 > > +#define IMX678_ANA_GAIN_DEFAULT 0 > > + > > +/* Crop */ > > +#define IMX678_REG_WINMODE CCI_REG8(0x3018) > > +#define IMX678_REG_PIX_HST CCI_REG16_LE(0x303c) > > +#define IMX678_REG_PIX_HWIDTH CCI_REG16_LE(0x303e) > > +#define IMX678_REG_PIX_VST CCI_REG16_LE(0x3044) > > +#define IMX678_REG_PIX_VWIDTH CCI_REG16_LE(0x3046) > > + > > +/* Flip */ > > +#define IMX678_REG_WINMODEH CCI_REG8(0x3020) > > +#define IMX678_REG_WINMODEV CCI_REG8(0x3021) > > + > > +/* Sensor Identification */ > > +#define IMX678_REG_MONOCHROME CCI_REG8(0x4D18) > > +#define IMX678_TYPE BIT(0) > > +#define IMX678_REG_MODULE_ID CCI_REG16_LE(0x4D1C) > > +#define IMX678_ID 0x02a6 > > +#define IMX678_MODULE_ID_DELAY 80000 > > + > > +/* Common configuration registers */ > > +#define IMX678_REG_WDMODE CCI_REG8(0x301A) > > +#define IMX678_REG_ADDMODE CCI_REG8(0x301B) > > +#define IMX678_REG_THIN_V_EN CCI_REG8(0x301C) > > +#define IMX678_REG_VCMODE CCI_REG8(0x301E) > > +#define IMX678_REG_ADBIT CCI_REG8(0x3022) > > +#define IMX678_REG_MDBIT CCI_REG8(0x3023) > > +#define IMX678_REG_GAIN_PGC_FIDMD CCI_REG8(0x3400) >=20 > Lower case hexadecimals, please. >=20 Ack. > > + > > +/* Test pattern generator */ > > +#define IMX678_REG_TPG_EN_DUOUT CCI_REG8(0x30E0) > > +#define IMX678_REG_TPG_PATSEL_DUOUT CCI_REG8(0x30E2) > > +#define IMX678_TPG_ALL_000 0 > > +#define IMX678_TPG_ALL_FFF 1 > > +#define IMX678_TPG_ALL_555 2 > > +#define IMX678_TPG_ALL_AAA 3 > > +#define IMX678_TPG_TOG_555_AAA 4 > > +#define IMX678_TPG_TOG_AAA_555 5 > > +#define IMX678_TPG_TOG_000_555 6 > > +#define IMX678_TPG_TOG_555_000 7 > > +#define IMX678_TPG_TOG_000_FFF 8 > > +#define IMX678_TPG_TOG_FFF_000 9 > > +#define IMX678_TPG_H_COLOR_BARS 10 > > +#define IMX678_TPG_V_COLOR_BARS 11 > > +#define IMX678_REG_TPG_COLORWIDTH CCI_REG8(0x30E4) > > +#define IMX678_TPG_COLORWIDTH_80PIX 0 > > +#define IMX678_TPG_COLORWIDTH_160PIX 1 > > +#define IMX678_TPG_COLORWIDTH_320PIX 2 > > +#define IMX678_TPG_COLORWIDTH_640PIX 3 > > + > > +#define IMX678_REG_INTERFACE_SEL CCI_REG8(0x4E3C) > > +#define IMX678_INTERFACE_2L_4L 0x07 > > +#define IMX678_INTERFACE_8L_2x4L 0x7f > > + > > +/* Minimum output resolution */ > > +#define IMX678_PIXEL_ARRAY_MIN_WIDTH 1040 > > +#define IMX678_PIXEL_ARRAY_MIN_HEIGHT 956 > > + > > +/* Sensor windowing register alignment */ > > +#define IMX678_CROP_HWIDTH_ALIGN 16 > > +#define IMX678_CROP_VWIDTH_ALIGN 4 > > +#define IMX678_CROP_HST_ALIGN 4 > > +#define IMX678_CROP_VST_ALIGN 4 > > + > > +/* IMX678 native and active pixel array size. */ > > +static const struct v4l2_rect imx678_native_area =3D { > > + .top =3D 0, > > + .left =3D 0, > > + .width =3D 3857, > > + .height =3D 2201, > > +}; > > + > > +static const struct v4l2_rect imx678_active_area =3D { > > + .top =3D 20, > > + .left =3D 0, > > + .width =3D 3856, > > + .height =3D 2180, > > +}; > > + > > +enum imx678_type { > > + IMX678_COLOR =3D 0, > > + IMX678_MONOCHROME =3D 1, > > +}; > > + > > +struct imx678_model_info { > > + enum imx678_type type; > > +}; > > + > > +static const struct imx678_model_info imx678_aaqr_info =3D { > > + .type =3D IMX678_COLOR, > > +}; > > + > > +static const struct imx678_model_info imx678_aamr_info =3D { > > + .type =3D IMX678_MONOCHROME, > > +}; > > + > > +enum imx678_lanemode { > > + IMX678_LANEMODE_2L =3D 1, > > + IMX678_LANEMODE_4L =3D 3, > > +}; > > + > > +/* Link frequency setup (DDR: lane rate =3D 2 x link freq) */ > > +enum { > > + IMX678_LINK_FREQ_297MHZ, > > + IMX678_LINK_FREQ_360MHZ, > > + IMX678_LINK_FREQ_445MHZ, > > + IMX678_LINK_FREQ_594MHZ, > > + IMX678_LINK_FREQ_720MHZ, > > + IMX678_LINK_FREQ_891MHZ, > > + IMX678_LINK_FREQ_1039MHZ, > > + IMX678_LINK_FREQ_1188MHZ, > > +}; > > + > > +static const u8 link_freqs_reg_value[] =3D { > > + [IMX678_LINK_FREQ_297MHZ] =3D 0x07, > > + [IMX678_LINK_FREQ_360MHZ] =3D 0x06, > > + [IMX678_LINK_FREQ_445MHZ] =3D 0x05, > > + [IMX678_LINK_FREQ_594MHZ] =3D 0x04, > > + [IMX678_LINK_FREQ_720MHZ] =3D 0x03, > > + [IMX678_LINK_FREQ_891MHZ] =3D 0x02, > > + [IMX678_LINK_FREQ_1039MHZ] =3D 0x01, > > + [IMX678_LINK_FREQ_1188MHZ] =3D 0x00, > > +}; > > + > > +static const u64 link_freqs[] =3D { > > + [IMX678_LINK_FREQ_297MHZ] =3D 297000000, > > + [IMX678_LINK_FREQ_360MHZ] =3D 360000000, > > + [IMX678_LINK_FREQ_445MHZ] =3D 445500000, > > + [IMX678_LINK_FREQ_594MHZ] =3D 594000000, > > + [IMX678_LINK_FREQ_720MHZ] =3D 720000000, > > + [IMX678_LINK_FREQ_891MHZ] =3D 891000000, > > + [IMX678_LINK_FREQ_1039MHZ] =3D 1039500000, > > + [IMX678_LINK_FREQ_1188MHZ] =3D 1188000000, > > +}; > > + > > +static const u16 min_hmax_4lane[] =3D { > > + [IMX678_LINK_FREQ_297MHZ] =3D 1584, > > + [IMX678_LINK_FREQ_360MHZ] =3D 1320, > > + [IMX678_LINK_FREQ_445MHZ] =3D 1100, > > + [IMX678_LINK_FREQ_594MHZ] =3D 792, > > + [IMX678_LINK_FREQ_720MHZ] =3D 660, > > + [IMX678_LINK_FREQ_891MHZ] =3D 550, > > + [IMX678_LINK_FREQ_1039MHZ] =3D 550, > > + [IMX678_LINK_FREQ_1188MHZ] =3D 550, > > +}; > > + > > +struct imx678_inck_cfg { > > + u32 xclk_hz; /* platform clock rate */ > > + u8 inck_sel; /* value for reg */ > > +}; > > + > > +static const struct imx678_inck_cfg imx678_inck_table[] =3D { > > + { 74250000, 0x00 }, > > + { 37125000, 0x01 }, > > + { 72000000, 0x02 }, > > + { 27000000, 0x03 }, > > + { 24000000, 0x04 }, > > + { 36000000, 0x05 }, > > + { 18000000, 0x06 }, > > + { 13500000, 0x07 }, > > +}; > > + > > +static const char * const imx678_tpg_menu[] =3D { > > + "Disabled", > > + "All 000h", > > + "All FFFh", > > + "All 555h", > > + "All AAAh", > > + "Toggle 555/AAAh", > > + "Toggle AAA/555h", > > + "Toggle 000/555h", > > + "Toggle 555/000h", > > + "Toggle 000/FFFh", > > + "Toggle FFF/000h", > > + "Horizontal color bars", > > + "Vertical color bars", > > +}; > > + > > +static const int imx678_tpg_val[] =3D { > > + IMX678_TPG_ALL_000, > > + IMX678_TPG_ALL_000, > > + IMX678_TPG_ALL_FFF, > > + IMX678_TPG_ALL_555, > > + IMX678_TPG_ALL_AAA, > > + IMX678_TPG_TOG_555_AAA, > > + IMX678_TPG_TOG_AAA_555, > > + IMX678_TPG_TOG_000_555, > > + IMX678_TPG_TOG_555_000, > > + IMX678_TPG_TOG_000_FFF, > > + IMX678_TPG_TOG_FFF_000, > > + IMX678_TPG_H_COLOR_BARS, > > + IMX678_TPG_V_COLOR_BARS, > > +}; > > + > > +/* IMX678 Register List */ > > +/* Common Modes */ > > +static const struct cci_reg_sequence common_regs[] =3D { > > + {IMX678_REG_THIN_V_EN, 0x00}, >=20 > Spaces inside braces, please. >=20 Ack. > > + {IMX678_REG_VCMODE, 0x01}, > > + {CCI_REG8(0x306B), 0x00}, > > + {IMX678_REG_GAIN_PGC_FIDMD, 0x01}, > > + {CCI_REG8(0x3460), 0x22}, > > + {CCI_REG8(0x355A), 0x64}, > > + {CCI_REG8(0x3A02), 0x7A}, > > + {CCI_REG8(0x3A10), 0xEC}, > > + {CCI_REG8(0x3A12), 0x71}, > > + {CCI_REG8(0x3A14), 0xDE}, > > + {CCI_REG8(0x3A20), 0x2B}, > > + {CCI_REG8(0x3A24), 0x22}, > > + {CCI_REG8(0x3A25), 0x25}, > > + {CCI_REG8(0x3A26), 0x2A}, > > + {CCI_REG8(0x3A27), 0x2C}, > > + {CCI_REG8(0x3A28), 0x39}, > > + {CCI_REG8(0x3A29), 0x38}, > > + {CCI_REG8(0x3A30), 0x04}, > > + {CCI_REG8(0x3A31), 0x04}, > > + {CCI_REG8(0x3A32), 0x03}, > > + {CCI_REG8(0x3A33), 0x03}, > > + {CCI_REG8(0x3A34), 0x09}, > > + {CCI_REG8(0x3A35), 0x06}, > > + {CCI_REG8(0x3A38), 0xCD}, > > + {CCI_REG8(0x3A3A), 0x4C}, > > + {CCI_REG8(0x3A3C), 0xB9}, > > + {CCI_REG8(0x3A3E), 0x30}, > > + {CCI_REG8(0x3A40), 0x2C}, > > + {CCI_REG8(0x3A42), 0x39}, > > + {CCI_REG8(0x3A4E), 0x00}, > > + {CCI_REG8(0x3A52), 0x00}, > > + {CCI_REG8(0x3A56), 0x00}, > > + {CCI_REG8(0x3A5A), 0x00}, > > + {CCI_REG8(0x3A5E), 0x00}, > > + {CCI_REG8(0x3A62), 0x00}, > > + {CCI_REG8(0x3A64), 0x00}, > > + {CCI_REG8(0x3A6E), 0xA0}, > > + {CCI_REG8(0x3A70), 0x50}, > > + {CCI_REG8(0x3A8C), 0x04}, > > + {CCI_REG8(0x3A8D), 0x03}, > > + {CCI_REG8(0x3A8E), 0x09}, > > + {CCI_REG8(0x3A90), 0x38}, > > + {CCI_REG8(0x3A91), 0x42}, > > + {CCI_REG8(0x3A92), 0x3C}, > > + {CCI_REG8(0x3B0E), 0xF3}, > > + {CCI_REG8(0x3B12), 0xE5}, > > + {CCI_REG8(0x3B27), 0xC0}, > > + {CCI_REG8(0x3B2E), 0xEF}, > > + {CCI_REG8(0x3B30), 0x6A}, > > + {CCI_REG8(0x3B32), 0xF6}, > > + {CCI_REG8(0x3B36), 0xE1}, > > + {CCI_REG8(0x3B3A), 0xE8}, > > + {CCI_REG8(0x3B5A), 0x17}, > > + {CCI_REG8(0x3B5E), 0xEF}, > > + {CCI_REG8(0x3B60), 0x6A}, > > + {CCI_REG8(0x3B62), 0xF6}, > > + {CCI_REG8(0x3B66), 0xE1}, > > + {CCI_REG8(0x3B6A), 0xE8}, > > + {CCI_REG8(0x3B88), 0xEC}, > > + {CCI_REG8(0x3B8A), 0xED}, > > + {CCI_REG8(0x3B94), 0x71}, > > + {CCI_REG8(0x3B96), 0x72}, > > + {CCI_REG8(0x3B98), 0xDE}, > > + {CCI_REG8(0x3B9A), 0xDF}, > > + {CCI_REG8(0x3C0F), 0x06}, > > + {CCI_REG8(0x3C10), 0x06}, > > + {CCI_REG8(0x3C11), 0x06}, > > + {CCI_REG8(0x3C12), 0x06}, > > + {CCI_REG8(0x3C13), 0x06}, > > + {CCI_REG8(0x3C18), 0x20}, > > + {CCI_REG8(0x3C37), 0x10}, > > + {CCI_REG8(0x3C3A), 0x7A}, > > + {CCI_REG8(0x3C40), 0xF4}, > > + {CCI_REG8(0x3C48), 0xE6}, > > + {CCI_REG8(0x3C54), 0xCE}, > > + {CCI_REG8(0x3C56), 0xD0}, > > + {CCI_REG8(0x3C6C), 0x53}, > > + {CCI_REG8(0x3C6E), 0x55}, > > + {CCI_REG8(0x3C70), 0xC0}, > > + {CCI_REG8(0x3C72), 0xC2}, > > + {CCI_REG8(0x3C7E), 0xCE}, > > + {CCI_REG8(0x3C8C), 0xCF}, > > + {CCI_REG8(0x3C8E), 0xEB}, > > + {CCI_REG8(0x3C98), 0x54}, > > + {CCI_REG8(0x3C9A), 0x70}, > > + {CCI_REG8(0x3C9C), 0xC1}, > > + {CCI_REG8(0x3C9E), 0xDD}, > > + {CCI_REG8(0x3CB0), 0x7A}, > > + {CCI_REG8(0x3CB2), 0xBA}, > > + {CCI_REG8(0x3CC8), 0xBC}, > > + {CCI_REG8(0x3CCA), 0x7C}, > > + {CCI_REG8(0x3CD4), 0xEA}, > > + {CCI_REG8(0x3CD5), 0x01}, > > + {CCI_REG8(0x3CD6), 0x4A}, > > + {CCI_REG8(0x3CD8), 0x00}, > > + {CCI_REG8(0x3CD9), 0x00}, > > + {CCI_REG8(0x3CDA), 0xFF}, > > + {CCI_REG8(0x3CDB), 0x03}, > > + {CCI_REG8(0x3CDC), 0x00}, > > + {CCI_REG8(0x3CDD), 0x00}, > > + {CCI_REG8(0x3CDE), 0xFF}, > > + {CCI_REG8(0x3CDF), 0x03}, > > + {CCI_REG8(0x3CE4), 0x4C}, > > + {CCI_REG8(0x3CE6), 0xEC}, > > + {CCI_REG8(0x3CE7), 0x01}, > > + {CCI_REG8(0x3CE8), 0xFF}, > > + {CCI_REG8(0x3CE9), 0x03}, > > + {CCI_REG8(0x3CEA), 0x00}, > > + {CCI_REG8(0x3CEB), 0x00}, > > + {CCI_REG8(0x3CEC), 0xFF}, > > + {CCI_REG8(0x3CED), 0x03}, > > + {CCI_REG8(0x3CEE), 0x00}, > > + {CCI_REG8(0x3CEF), 0x00}, > > + {CCI_REG8(0x3CF2), 0xFF}, > > + {CCI_REG8(0x3CF3), 0x03}, > > + {CCI_REG8(0x3CF4), 0x00}, > > + {CCI_REG8(0x3E28), 0x82}, > > + {CCI_REG8(0x3E2A), 0x80}, > > + {CCI_REG8(0x3E30), 0x85}, > > + {CCI_REG8(0x3E32), 0x7D}, > > + {CCI_REG8(0x3E5C), 0xCE}, > > + {CCI_REG8(0x3E5E), 0xD3}, > > + {CCI_REG8(0x3E70), 0x53}, > > + {CCI_REG8(0x3E72), 0x58}, > > + {CCI_REG8(0x3E74), 0xC0}, > > + {CCI_REG8(0x3E76), 0xC5}, > > + {CCI_REG8(0x3E78), 0xC0}, > > + {CCI_REG8(0x3E79), 0x01}, > > + {CCI_REG8(0x3E7A), 0xD4}, > > + {CCI_REG8(0x3E7B), 0x01}, > > + {CCI_REG8(0x3EB4), 0x0B}, > > + {CCI_REG8(0x3EB5), 0x02}, > > + {CCI_REG8(0x3EB6), 0x4D}, > > + {CCI_REG8(0x3EB7), 0x42}, > > + {CCI_REG8(0x3EEC), 0xF3}, > > + {CCI_REG8(0x3EEE), 0xE7}, > > + {CCI_REG8(0x3F01), 0x01}, > > + {CCI_REG8(0x3F24), 0x10}, > > + {CCI_REG8(0x3F28), 0x2D}, > > + {CCI_REG8(0x3F2A), 0x2D}, > > + {CCI_REG8(0x3F2C), 0x2D}, > > + {CCI_REG8(0x3F2E), 0x2D}, > > + {CCI_REG8(0x3F30), 0x23}, > > + {CCI_REG8(0x3F38), 0x2D}, > > + {CCI_REG8(0x3F3A), 0x2D}, > > + {CCI_REG8(0x3F3C), 0x2D}, > > + {CCI_REG8(0x3F3E), 0x28}, > > + {CCI_REG8(0x3F40), 0x1E}, > > + {CCI_REG8(0x3F48), 0x2D}, > > + {CCI_REG8(0x3F4A), 0x2D}, > > + {CCI_REG8(0x3F4C), 0x00}, > > + {CCI_REG8(0x4004), 0xE4}, > > + {CCI_REG8(0x4006), 0xFF}, > > + {CCI_REG8(0x4018), 0x69}, > > + {CCI_REG8(0x401A), 0x84}, > > + {CCI_REG8(0x401C), 0xD6}, > > + {CCI_REG8(0x401E), 0xF1}, > > + {CCI_REG8(0x4038), 0xDE}, > > + {CCI_REG8(0x403A), 0x00}, > > + {CCI_REG8(0x403B), 0x01}, > > + {CCI_REG8(0x404C), 0x63}, > > + {CCI_REG8(0x404E), 0x85}, > > + {CCI_REG8(0x4050), 0xD0}, > > + {CCI_REG8(0x4052), 0xF2}, > > + {CCI_REG8(0x4108), 0xDD}, > > + {CCI_REG8(0x410A), 0xF7}, > > + {CCI_REG8(0x411C), 0x62}, > > + {CCI_REG8(0x411E), 0x7C}, > > + {CCI_REG8(0x4120), 0xCF}, > > + {CCI_REG8(0x4122), 0xE9}, > > + {CCI_REG8(0x4138), 0xE6}, > > + {CCI_REG8(0x413A), 0xF1}, > > + {CCI_REG8(0x414C), 0x6B}, > > + {CCI_REG8(0x414E), 0x76}, > > + {CCI_REG8(0x4150), 0xD8}, > > + {CCI_REG8(0x4152), 0xE3}, > > + {CCI_REG8(0x417E), 0x03}, > > + {CCI_REG8(0x417F), 0x01}, > > + {CCI_REG8(0x4186), 0xE0}, > > + {CCI_REG8(0x4190), 0xF3}, > > + {CCI_REG8(0x4192), 0xF7}, > > + {CCI_REG8(0x419C), 0x78}, > > + {CCI_REG8(0x419E), 0x7C}, > > + {CCI_REG8(0x41A0), 0xE5}, > > + {CCI_REG8(0x41A2), 0xE9}, > > + {CCI_REG8(0x41C8), 0xE2}, > > + {CCI_REG8(0x41CA), 0xFD}, > > + {CCI_REG8(0x41DC), 0x67}, > > + {CCI_REG8(0x41DE), 0x82}, > > + {CCI_REG8(0x41E0), 0xD4}, > > + {CCI_REG8(0x41E2), 0xEF}, > > + {CCI_REG8(0x4200), 0xDE}, > > + {CCI_REG8(0x4202), 0xDA}, > > + {CCI_REG8(0x4218), 0x63}, > > + {CCI_REG8(0x421A), 0x5F}, > > + {CCI_REG8(0x421C), 0xD0}, > > + {CCI_REG8(0x421E), 0xCC}, > > + {CCI_REG8(0x425A), 0x82}, > > + {CCI_REG8(0x425C), 0xEF}, > > + {CCI_REG8(0x4348), 0xFE}, > > + {CCI_REG8(0x4349), 0x06}, > > + {CCI_REG8(0x4352), 0xCE}, > > + {CCI_REG8(0x4420), 0x0B}, > > + {CCI_REG8(0x4421), 0x02}, > > + {CCI_REG8(0x4422), 0x4D}, > > + {CCI_REG8(0x4423), 0x0A}, > > + {CCI_REG8(0x4426), 0xF5}, > > + {CCI_REG8(0x442A), 0xE7}, > > + {CCI_REG8(0x4432), 0xF5}, > > + {CCI_REG8(0x4436), 0xE7}, > > + {CCI_REG8(0x4466), 0xB4}, > > + {CCI_REG8(0x446E), 0x32}, > > + {CCI_REG8(0x449F), 0x1C}, > > + {CCI_REG8(0x44A4), 0x2C}, > > + {CCI_REG8(0x44A6), 0x2C}, > > + {CCI_REG8(0x44A8), 0x2C}, > > + {CCI_REG8(0x44AA), 0x2C}, > > + {CCI_REG8(0x44B4), 0x2C}, > > + {CCI_REG8(0x44B6), 0x2C}, > > + {CCI_REG8(0x44B8), 0x2C}, > > + {CCI_REG8(0x44BA), 0x2C}, > > + {CCI_REG8(0x44C4), 0x2C}, > > + {CCI_REG8(0x44C6), 0x2C}, > > + {CCI_REG8(0x44C8), 0x2C}, > > + {CCI_REG8(0x4506), 0xF3}, > > + {CCI_REG8(0x450E), 0xE5}, > > + {CCI_REG8(0x4516), 0xF3}, > > + {CCI_REG8(0x4522), 0xE5}, > > + {CCI_REG8(0x4524), 0xF3}, > > + {CCI_REG8(0x452C), 0xE5}, > > + {CCI_REG8(0x453C), 0x22}, > > + {CCI_REG8(0x453D), 0x1B}, > > + {CCI_REG8(0x453E), 0x1B}, > > + {CCI_REG8(0x453F), 0x15}, > > + {CCI_REG8(0x4540), 0x15}, > > + {CCI_REG8(0x4541), 0x15}, > > + {CCI_REG8(0x4542), 0x15}, > > + {CCI_REG8(0x4543), 0x15}, > > + {CCI_REG8(0x4544), 0x15}, > > + {CCI_REG8(0x4548), 0x00}, > > + {CCI_REG8(0x4549), 0x01}, > > + {CCI_REG8(0x454A), 0x01}, > > + {CCI_REG8(0x454B), 0x06}, > > + {CCI_REG8(0x454C), 0x06}, > > + {CCI_REG8(0x454D), 0x06}, > > + {CCI_REG8(0x454E), 0x06}, > > + {CCI_REG8(0x454F), 0x06}, > > + {CCI_REG8(0x4550), 0x06}, > > + {CCI_REG8(0x4554), 0x55}, > > + {CCI_REG8(0x4555), 0x02}, > > + {CCI_REG8(0x4556), 0x42}, > > + {CCI_REG8(0x4557), 0x05}, > > + {CCI_REG8(0x4558), 0xFD}, > > + {CCI_REG8(0x4559), 0x05}, > > + {CCI_REG8(0x455A), 0x94}, > > + {CCI_REG8(0x455B), 0x06}, > > + {CCI_REG8(0x455D), 0x06}, > > + {CCI_REG8(0x455E), 0x49}, > > + {CCI_REG8(0x455F), 0x07}, > > + {CCI_REG8(0x4560), 0x7F}, > > + {CCI_REG8(0x4561), 0x07}, > > + {CCI_REG8(0x4562), 0xA5}, > > + {CCI_REG8(0x4564), 0x55}, > > + {CCI_REG8(0x4565), 0x02}, > > + {CCI_REG8(0x4566), 0x42}, > > + {CCI_REG8(0x4567), 0x05}, > > + {CCI_REG8(0x4568), 0xFD}, > > + {CCI_REG8(0x4569), 0x05}, > > + {CCI_REG8(0x456A), 0x94}, > > + {CCI_REG8(0x456B), 0x06}, > > + {CCI_REG8(0x456D), 0x06}, > > + {CCI_REG8(0x456E), 0x49}, > > + {CCI_REG8(0x456F), 0x07}, > > + {CCI_REG8(0x4572), 0xA5}, > > + {CCI_REG8(0x460C), 0x7D}, > > + {CCI_REG8(0x460E), 0xB1}, > > + {CCI_REG8(0x4614), 0xA8}, > > + {CCI_REG8(0x4616), 0xB2}, > > + {CCI_REG8(0x461C), 0x7E}, > > + {CCI_REG8(0x461E), 0xA7}, > > + {CCI_REG8(0x4624), 0xA8}, > > + {CCI_REG8(0x4626), 0xB2}, > > + {CCI_REG8(0x462C), 0x7E}, > > + {CCI_REG8(0x462E), 0x8A}, > > + {CCI_REG8(0x4630), 0x94}, > > + {CCI_REG8(0x4632), 0xA7}, > > + {CCI_REG8(0x4634), 0xFB}, > > + {CCI_REG8(0x4636), 0x2F}, > > + {CCI_REG8(0x4638), 0x81}, > > + {CCI_REG8(0x4639), 0x01}, > > + {CCI_REG8(0x463A), 0xB5}, > > + {CCI_REG8(0x463B), 0x01}, > > + {CCI_REG8(0x463C), 0x26}, > > + {CCI_REG8(0x463E), 0x30}, > > + {CCI_REG8(0x4640), 0xAC}, > > + {CCI_REG8(0x4641), 0x01}, > > + {CCI_REG8(0x4642), 0xB6}, > > + {CCI_REG8(0x4643), 0x01}, > > + {CCI_REG8(0x4644), 0xFC}, > > + {CCI_REG8(0x4646), 0x25}, > > + {CCI_REG8(0x4648), 0x82}, > > + {CCI_REG8(0x4649), 0x01}, > > + {CCI_REG8(0x464A), 0xAB}, > > + {CCI_REG8(0x464B), 0x01}, > > + {CCI_REG8(0x464C), 0x26}, > > + {CCI_REG8(0x464E), 0x30}, > > + {CCI_REG8(0x4654), 0xFC}, > > + {CCI_REG8(0x4656), 0x08}, > > + {CCI_REG8(0x4658), 0x12}, > > + {CCI_REG8(0x465A), 0x25}, > > + {CCI_REG8(0x4662), 0xFC}, > > + {CCI_REG8(0x46A2), 0xFB}, > > + {CCI_REG8(0x46D6), 0xF3}, > > + {CCI_REG8(0x46E6), 0x00}, > > + {CCI_REG8(0x46E8), 0xFF}, > > + {CCI_REG8(0x46E9), 0x03}, > > + {CCI_REG8(0x46EC), 0x7A}, > > + {CCI_REG8(0x46EE), 0xE5}, > > + {CCI_REG8(0x46F4), 0xEE}, > > + {CCI_REG8(0x46F6), 0xF2}, > > + {CCI_REG8(0x470C), 0xFF}, > > + {CCI_REG8(0x470D), 0x03}, > > + {CCI_REG8(0x470E), 0x00}, > > + {CCI_REG8(0x4714), 0xE0}, > > + {CCI_REG8(0x4716), 0xE4}, > > + {CCI_REG8(0x471E), 0xED}, > > + {CCI_REG8(0x472E), 0x00}, > > + {CCI_REG8(0x4730), 0xFF}, > > + {CCI_REG8(0x4731), 0x03}, > > + {CCI_REG8(0x4734), 0x7B}, > > + {CCI_REG8(0x4736), 0xDF}, > > + {CCI_REG8(0x4754), 0x7D}, > > + {CCI_REG8(0x4756), 0x8B}, > > + {CCI_REG8(0x4758), 0x93}, > > + {CCI_REG8(0x475A), 0xB1}, > > + {CCI_REG8(0x475C), 0xFB}, > > + {CCI_REG8(0x475E), 0x09}, > > + {CCI_REG8(0x4760), 0x11}, > > + {CCI_REG8(0x4762), 0x2F}, > > + {CCI_REG8(0x4766), 0xCC}, > > + {CCI_REG8(0x4776), 0xCB}, > > + {CCI_REG8(0x477E), 0x4A}, > > + {CCI_REG8(0x478E), 0x49}, > > + {CCI_REG8(0x4794), 0x7C}, > > + {CCI_REG8(0x4796), 0x8F}, > > + {CCI_REG8(0x4798), 0xB3}, > > + {CCI_REG8(0x4799), 0x00}, > > + {CCI_REG8(0x479A), 0xCC}, > > + {CCI_REG8(0x479C), 0xC1}, > > + {CCI_REG8(0x479E), 0xCB}, > > + {CCI_REG8(0x47A4), 0x7D}, > > + {CCI_REG8(0x47A6), 0x8E}, > > + {CCI_REG8(0x47A8), 0xB4}, > > + {CCI_REG8(0x47A9), 0x00}, > > + {CCI_REG8(0x47AA), 0xC0}, > > + {CCI_REG8(0x47AC), 0xFA}, > > + {CCI_REG8(0x47AE), 0x0D}, > > + {CCI_REG8(0x47B0), 0x31}, > > + {CCI_REG8(0x47B1), 0x01}, > > + {CCI_REG8(0x47B2), 0x4A}, > > + {CCI_REG8(0x47B3), 0x01}, > > + {CCI_REG8(0x47B4), 0x3F}, > > + {CCI_REG8(0x47B6), 0x49}, > > + {CCI_REG8(0x47BC), 0xFB}, > > + {CCI_REG8(0x47BE), 0x0C}, > > + {CCI_REG8(0x47C0), 0x32}, > > + {CCI_REG8(0x47C1), 0x01}, > > + {CCI_REG8(0x47C2), 0x3E}, > > + {CCI_REG8(0x47C3), 0x01}, > > + {IMX678_REG_WDMODE, 0x00}, > > + {IMX678_REG_MDBIT, 0x01}, > > + {IMX678_REG_XXS_DRV, 0x00}, > > +}; > > + > > +static const u32 codes_bayer[] =3D { > > + MEDIA_BUS_FMT_SRGGB12_1X12, > > +}; > > + > > +static const u32 codes_monochrome[] =3D { > > + MEDIA_BUS_FMT_Y12_1X12, /* 12-bit mono */ > > +}; > > + > > +#define IMX678_NUM_CODES ARRAY_SIZE(codes_bayer) >=20 > Use ARRAY_SIZE(...) where you need it instead -- like you do for the > regulators. >=20 > > + > > +static const char * const imx678_supply_name[] =3D { > > + "avdd", /* Analog (3.3V) supply */ > > + "dvdd", /* Digital Core (1.1V) supply */ > > + "ovdd", /* IF (1.8V) supply */ > > +}; > > + > > +struct imx678 { > > + struct v4l2_subdev sd; > > + struct media_pad pad; > > + struct regmap *cci; > > + > > + enum imx678_type type; > > + > > + struct clk *xclk; > > + u32 xclk_freq; > > + > > + /* chosen INCK_SEL register value */ > > + u8 inck_sel_val; > > + > > + /* Link configurations */ > > + enum imx678_lanemode lane_mode; > > + unsigned long link_freq_bitmap; > > + > > + struct gpio_desc *reset_gpio; > > + struct regulator_bulk_data supplies[ARRAY_SIZE(imx678_supply_name= )]; > > + > > + struct v4l2_ctrl_handler ctrl_handler; > > + > > + /* V4L2 Controls */ > > + struct v4l2_ctrl *pixel_rate; > > + struct v4l2_ctrl *link_freq; > > + struct v4l2_ctrl *exposure; > > + struct v4l2_ctrl *gain; > > + struct v4l2_ctrl *vflip; > > + struct v4l2_ctrl *hflip; > > + struct v4l2_ctrl *vblank; > > + struct v4l2_ctrl *hblank; >=20 > Do you need all of the above? >=20 Ah no, only the blanking/exposure ones I think, will clean it up. > > + > > + /* Tracking sensor VMAX/HMAX value */ > > + u32 vmax; > > +}; > > + > > +static inline struct imx678 *to_imx678(struct v4l2_subdev *_sd) > > +{ > > + return container_of(_sd, struct imx678, sd); > > +} > > + > > +static inline struct v4l2_mbus_framefmt * > > +imx678_state_format(struct v4l2_subdev_state *state) > > +{ > > + return v4l2_subdev_state_get_format(state, 0); >=20 > I don't think having a function for this is useful. >=20 > > +} > > + > > +static inline struct v4l2_rect *imx678_state_crop(struct v4l2_subdev_s= tate *state) > > +{ > > + return v4l2_subdev_state_get_crop(state, 0); >=20 > Ditto. >=20 Ack. > > +} > > + > > +static bool imx678_state_binning(struct v4l2_subdev_state *state) > > +{ > > + const struct v4l2_mbus_framefmt *format =3D imx678_state_format(s= tate); > > + const struct v4l2_rect *crop =3D imx678_state_crop(state); > > + > > + return crop->width =3D=3D 2 * format->width && > > + crop->height =3D=3D 2 * format->height; > > +} > > + > > +static const u32 *imx678_mbus_codes(struct imx678 *imx678) > > +{ > > + if (imx678->type =3D=3D IMX678_MONOCHROME) > > + return codes_monochrome; > > + else > > + return codes_bayer; >=20 > Could you store the pointer to the relevant list to the device data? >=20 Ack. > > +} > > + > > +static u32 imx678_default_mbus_code(struct imx678 *imx678) > > +{ > > + const u32 *codes =3D imx678_mbus_codes(imx678); > > + > > + return codes[0]; > > +} > > + > > +static bool imx678_mbus_code_supported(struct imx678 *imx678, u32 code) > > +{ > > + const u32 *codes =3D imx678_mbus_codes(imx678); > > + > > + for (unsigned int i =3D 0; i < IMX678_NUM_CODES; i++) { > > + if (codes[i] =3D=3D code) > > + return true; > > + } > > + > > + return false; > > +} > > + > > +static u32 imx678_get_format_code(struct imx678 *imx678, u32 code) > > +{ > > + if (imx678_mbus_code_supported(imx678, code)) > > + return code; > > + > > + return imx678_default_mbus_code(imx678); > > +} > > + > > +static void imx678_set_framing_limits(struct imx678 *imx678, > > + struct v4l2_subdev_state *state) > > +{ > > + const struct v4l2_mbus_framefmt *format =3D imx678_state_format(s= tate); > > + s64 min_hblank, default_hblank, max_hblank, vblank; >=20 > Why are these 64-bit numbers? The control framework uses 32 bits and the > sensor uses less than that. Oops I saw __v4l2_ctrl_modify_range types has u64 parameters, but now I see that we don't use 64-bit controls unless `V4L2_CTRL_TYPE_INTEGER64` is set. Will fix in v4. >=20 > > + const u32 hmax_4lane =3D min_hmax_4lane[__ffs(imx678->link_freq_b= itmap)]; > > + const u32 lane_scale =3D imx678->lane_mode =3D=3D IMX678_LANEMODE= _2L ? 2 : 1; > > + const bool binning =3D imx678_state_binning(state); > > + const u8 bpp =3D binning ? 10 : 12; > > + u32 hmax, min_hmax; > > + > > + imx678->vmax =3D IMX678_VMAX_DEFAULT; > > + hmax =3D hmax_4lane * lane_scale; > > + > > + /* HMAX can go lower when using 10bit AD for binning */ > > + min_hmax =3D (hmax * bpp) / 12; > > + min_hblank =3D min_hmax * IMX678_PIX_PER_CLK - format->width; > > + default_hblank =3D hmax * IMX678_PIX_PER_CLK - format->width; > > + max_hblank =3D IMX678_HMAX_MAX * IMX678_PIX_PER_CLK - format->wid= th; > > + > > + __v4l2_ctrl_modify_range(imx678->hblank, min_hblank, max_hblank, > > + IMX678_PIX_PER_CLK, default_hblank); > > + __v4l2_ctrl_s_ctrl(imx678->hblank, default_hblank); > > + > > + vblank =3D imx678->vmax - format->height; > > + __v4l2_ctrl_modify_range(imx678->vblank, vblank, > > + IMX678_VMAX_MAX - format->height, 2, vbl= ank); > > + __v4l2_ctrl_s_ctrl(imx678->vblank, IMX678_VMAX_DEFAULT - format->= height); > > + > > + __v4l2_ctrl_modify_range(imx678->exposure, IMX678_EXPOSURE_MIN, > > + imx678->vmax - IMX678_SHR_MIN, 1, > > + IMX678_EXPOSURE_DEFAULT); > > +} > > + > > +static int imx678_set_ctrl(struct v4l2_ctrl *ctrl) > > +{ > > + struct imx678 *imx678 =3D container_of(ctrl->handler, struct imx6= 78, ctrl_handler); > > + struct v4l2_subdev_state *state; > > + struct i2c_client *client =3D v4l2_get_subdevdata(&imx678->sd); > > + const struct v4l2_mbus_framefmt *format; > > + int ret =3D 0; > > + > > + state =3D v4l2_subdev_get_locked_active_state(&imx678->sd); > > + format =3D imx678_state_format(state); > > + > > + if (ctrl->id =3D=3D V4L2_CID_VBLANK) { > > + u32 current_exposure =3D imx678->exposure->cur.val; > > + > > + imx678->vmax =3D format->height + ctrl->val; > > + > > + current_exposure =3D clamp_t(u32, current_exposure, IMX67= 8_EXPOSURE_MIN, > > + imx678->vmax - IMX678_SHR_MIN); > > + __v4l2_ctrl_modify_range(imx678->exposure, IMX678_EXPOSUR= E_MIN, > > + imx678->vmax - IMX678_SHR_MIN, 1, > > + current_exposure); > > + } > > + > > + /* > > + * Applying V4L2 control value only happens > > + * when power is up for streaming > > + */ > > + if (pm_runtime_get_if_in_use(&client->dev) =3D=3D 0) > > + return 0; > > + > > + switch (ctrl->id) { > > + case V4L2_CID_VBLANK: > > + cci_write(imx678->cci, IMX678_REG_VMAX, imx678->vmax, &re= t); > > + fallthrough; /* SHR =3D VMAX - exposure, so update it */ > > + case V4L2_CID_EXPOSURE: { >=20 > If exposure changes, this needs to be reflected in the control value. In > practice you should use __v4l2_ctrl_modify_range(). That's done already in the `if (ctrl->id =3D=3D V4L2_CID_VBLANK)` check abo= ve. >=20 > > + u32 shr =3D imx678->vmax - imx678->exposure->val; > > + > > + cci_write(imx678->cci, IMX678_REG_SHR, shr, &ret); > > + break; > > + } > > + case V4L2_CID_ANALOGUE_GAIN: > > + cci_write(imx678->cci, IMX678_REG_ANALOG_GAIN, ctrl->val,= &ret); > > + break; > > + case V4L2_CID_HBLANK: { > > + u32 hmax =3D (format->width + ctrl->val) / IMX678_PIX_PER= _CLK; >=20 > What does IMX678_PIX_PER_CLK signify? >=20 The sensor's internal HMAX/LLP register is not in units of pixels but in units of an internal 74.25 MHz clock. While HBLANK/VBLANK controls are in units of pixels (at PIXEL_RATE) and lines. > > + > > + cci_write(imx678->cci, IMX678_REG_HMAX, hmax, &ret); > > + break; > > + } > > + case V4L2_CID_TEST_PATTERN: { > > + cci_write(imx678->cci, IMX678_REG_TPG_COLORWIDTH, > > + IMX678_TPG_COLORWIDTH_160PIX, &ret); > > + cci_write(imx678->cci, IMX678_REG_TPG_PATSEL_DUOUT, > > + imx678_tpg_val[ctrl->val], &ret); > > + cci_write(imx678->cci, IMX678_REG_TPG_EN_DUOUT, (ctrl->va= l) ? 1 : 0, > > + &ret); > > + break; > > + } > > + case V4L2_CID_HFLIP: > > + cci_write(imx678->cci, IMX678_REG_WINMODEH, ctrl->val, &r= et); > > + break; > > + case V4L2_CID_VFLIP: > > + cci_write(imx678->cci, IMX678_REG_WINMODEV, ctrl->val, &r= et); > > + break; > > + default: > > + dev_warn(&client->dev, > > + "ctrl(id:0x%x,val:0x%x) is not handled\n", > > + ctrl->id, ctrl->val); > > + break; > > + } > > + > > + pm_runtime_put(&client->dev); > > + > > + return ret; > > +} > > + > > +static const struct v4l2_ctrl_ops imx678_ctrl_ops =3D { > > + .s_ctrl =3D imx678_set_ctrl, > > +}; > > + > > +static int imx678_enum_mbus_code(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *sd_state, > > + struct v4l2_subdev_mbus_code_enum *code) > > +{ > > + struct imx678 *imx678 =3D to_imx678(sd); > > + const u32 *codes =3D imx678_mbus_codes(imx678); > > + > > + if (code->index >=3D IMX678_NUM_CODES) > > + return -EINVAL; > > + > > + code->code =3D codes[code->index]; > > + return 0; > > +} > > + > > +static int imx678_enum_frame_size(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *sd_state, > > + struct v4l2_subdev_frame_size_enum *fse) > > +{ > > + const struct v4l2_rect *crop =3D imx678_state_crop(sd_state); > > + struct imx678 *imx678 =3D to_imx678(sd); > > + > > + /* Return non-binned and binned resolution for current crop */ > > + if (fse->index > 1) > > + return -EINVAL; > > + > > + if (!imx678_mbus_code_supported(imx678, fse->code)) > > + return -EINVAL; > > + > > + fse->min_width =3D crop->width / (fse->index + 1); > > + fse->max_width =3D fse->min_width; > > + fse->min_height =3D crop->height / (fse->index + 1); > > + fse->max_height =3D fse->min_height; > > + > > + return 0; > > +} > > + > > +/* > > + * Only two format sizes are valid for a given crop rectangle: > > + * - format =3D crop (no binning) > > + * - format =3D crop / 2 (2x2 binning, when it fits) > > + */ > > +static int imx678_set_pad_format(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *sd_state, > > + struct v4l2_subdev_format *fmt) > > +{ > > + struct imx678 *imx678 =3D to_imx678(sd); > > + struct v4l2_mbus_framefmt *format; > > + u32 width =3D fmt->format.width; > > + u32 height =3D fmt->format.height; > > + struct v4l2_rect *crop; > > + > > + if (fmt->which =3D=3D V4L2_SUBDEV_FORMAT_ACTIVE && > > + v4l2_subdev_is_streaming(sd)) > > + return -EBUSY; > > + > > + crop =3D imx678_state_crop(sd_state); > > + format =3D v4l2_subdev_state_get_format(sd_state, fmt->pad); > > + > > + /* Snap format size to 2x2 binned mode if it is < 0.75 * crop */ > > + if ((4 * width < 3 * crop->width) && > > + (4 * height < 3 * crop->height)) { > > + format->width =3D crop->width / 2; > > + format->height =3D crop->height / 2; >=20 > I think I'd postpone adding this before the common raw sensor model. It > gets complicated otherwise. >=20 Ack. I will rebase on your raw sensor model series and test out if I can get raw capture to work with some minimal changes to userspace tools. > > + } else { > > + format->width =3D crop->width; > > + format->height =3D crop->height; > > + } > > + > > + format->code =3D imx678_get_format_code(imx678, fmt->format.code); > > + format->field =3D V4L2_FIELD_NONE; > > + format->colorspace =3D V4L2_COLORSPACE_RAW; > > + format->ycbcr_enc =3D V4L2_YCBCR_ENC_DEFAULT; > > + format->quantization =3D V4L2_QUANTIZATION_FULL_RANGE; > > + format->xfer_func =3D V4L2_XFER_FUNC_NONE; > > + > > + if (fmt->which =3D=3D V4L2_SUBDEV_FORMAT_ACTIVE) > > + imx678_set_framing_limits(imx678, sd_state); > > + > > + return 0; > > +} > > + > > +static int imx678_get_selection(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *sd_state, > > + struct v4l2_subdev_selection *sel) > > +{ > > + switch (sel->target) { > > + case V4L2_SEL_TGT_CROP: > > + sel->r =3D *imx678_state_crop(sd_state); > > + return 0; > > + > > + case V4L2_SEL_TGT_NATIVE_SIZE: > > + sel->r =3D imx678_native_area; > > + return 0; > > + > > + case V4L2_SEL_TGT_CROP_DEFAULT: > > + case V4L2_SEL_TGT_CROP_BOUNDS: > > + sel->r =3D imx678_active_area; > > + return 0; > > + } > > + > > + return -EINVAL; > > +} > > + > > +static int imx678_set_selection(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *sd_state, > > + struct v4l2_subdev_selection *sel) > > +{ >=20 > This, too, I'd postpone until the common raw sensor model. >=20 Ack. > > + struct imx678 *imx678 =3D to_imx678(sd); > > + struct v4l2_rect *crop; > > + struct v4l2_rect rect; > > + > > + if (sel->target !=3D V4L2_SEL_TGT_CROP || sel->pad !=3D 0) > > + return -EINVAL; > > + > > + if (sel->which =3D=3D V4L2_SUBDEV_FORMAT_ACTIVE && > > + v4l2_subdev_is_streaming(sd)) > > + return -EBUSY; > > + > > + /* Align left, top to 4 */ > > + rect.left =3D clamp_t(s32, ALIGN(sel->r.left, IMX678_CROP_HST_ALI= GN), > > + imx678_active_area.left, > > + imx678_active_area.width - IMX678_PIXEL_ARRAY= _MIN_WIDTH); > > + rect.top =3D clamp_t(s32, ALIGN(sel->r.top, IMX678_CROP_VST_ALIGN= ), > > + imx678_active_area.top, > > + imx678_active_area.height - IMX678_PIXEL_ARRAY= _MIN_HEIGHT); > > + /* Align width to 16 and height to 4 */ > > + rect.width =3D clamp_t(u32, ALIGN(sel->r.width, IMX678_CROP_HWIDT= H_ALIGN), > > + IMX678_PIXEL_ARRAY_MIN_WIDTH, imx678_active_= area.width); > > + rect.height =3D clamp_t(u32, ALIGN(sel->r.height, IMX678_CROP_VWI= DTH_ALIGN), > > + IMX678_PIXEL_ARRAY_MIN_HEIGHT, imx678_activ= e_area.height); > > + > > + rect.width =3D min_t(u32, rect.width, imx678_native_area.width - = rect.left); > > + rect.height =3D min_t(u32, rect.height, imx678_native_area.height= - rect.top); > > + > > + crop =3D v4l2_subdev_state_get_crop(sd_state, sel->pad); > > + > > + if (rect.width !=3D crop->width || rect.height !=3D crop->height)= { > > + struct v4l2_mbus_framefmt *format =3D > > + v4l2_subdev_state_get_format(sd_state, sel->pad); > > + format->width =3D rect.width; > > + format->height =3D rect.height; > > + } > > + > > + *crop =3D rect; > > + sel->r =3D *crop; > > + > > + if (sel->which =3D=3D V4L2_SUBDEV_FORMAT_ACTIVE) > > + imx678_set_framing_limits(imx678, sd_state); > > + > > + return 0; > > +} > > + > > +static int imx678_init_state(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state) > > +{ > > + struct imx678 *imx678 =3D to_imx678(sd); > > + struct v4l2_subdev_selection sel =3D { > > + .which =3D V4L2_SUBDEV_FORMAT_TRY, > > + .target =3D V4L2_SEL_TGT_CROP, > > + .r =3D imx678_active_area, > > + }; > > + struct v4l2_subdev_format fmt =3D { > > + .which =3D V4L2_SUBDEV_FORMAT_TRY, > > + .pad =3D 0, > > + .format =3D { > > + .code =3D imx678_default_mbus_code(imx678), > > + .width =3D imx678_active_area.width, > > + .height =3D imx678_active_area.height, > > + }, > > + }; > > + > > + imx678_set_selection(sd, state, &sel); > > + imx678_set_pad_format(sd, state, &fmt); > > + > > + return 0; > > +} > > + > > +static int imx678_write_common(struct imx678 *imx678) > > +{ > > + int ret =3D 0; > > + > > + cci_multi_reg_write(imx678->cci, common_regs, ARRAY_SIZE(common_r= egs), &ret); > > + > > + cci_write(imx678->cci, IMX678_REG_INCK_SEL, imx678->inck_sel_val,= &ret); > > + cci_write(imx678->cci, IMX678_REG_DATARATE_SEL, > > + link_freqs_reg_value[__ffs(imx678->link_freq_bitmap)], = &ret); > > + cci_write(imx678->cci, IMX678_REG_LANEMODE, imx678->lane_mode, &r= et); > > + > > + cci_write(imx678->cci, IMX678_REG_INTERFACE_SEL, IMX678_INTERFACE= _2L_4L, > > + &ret); > > + > > + return ret; > > +} > > + > > +static int imx678_program_window(struct imx678 *imx678, > > + const struct v4l2_rect *crop, bool binni= ng) > > +{ > > + int ret =3D 0; > > + > > + cci_write(imx678->cci, IMX678_REG_ADDMODE, binning ? 0x01 : 0x00,= &ret); > > + cci_write(imx678->cci, IMX678_REG_WINMODE, > > + v4l2_rect_equal(crop, &imx678_active_area) ? 0x00 : 0x0= 4, > > + &ret); > > + cci_write(imx678->cci, IMX678_REG_PIX_HST, > > + crop->left - imx678_active_area.left, &ret); > > + cci_write(imx678->cci, IMX678_REG_PIX_HWIDTH, crop->width, &ret); > > + cci_write(imx678->cci, IMX678_REG_PIX_VST, > > + crop->top - imx678_active_area.top, &ret); > > + cci_write(imx678->cci, IMX678_REG_PIX_VWIDTH, crop->height, &ret); > > + cci_write(imx678->cci, IMX678_REG_ADBIT, binning ? 0x00 : 0x01, &= ret); > > + > > + return ret; > > +} > > + > > +static int imx678_enable_streams(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state, u32 pad, > > + u64 mask) > > +{ > > + struct i2c_client *client =3D v4l2_get_subdevdata(sd); > > + struct imx678 *imx678 =3D to_imx678(sd); > > + const struct v4l2_rect *crop =3D imx678_state_crop(state); > > + const bool binning =3D imx678_state_binning(state); > > + int ret =3D 0; > > + > > + ret =3D pm_runtime_resume_and_get(&client->dev); > > + if (ret < 0) > > + return ret; > > + > > + ret =3D imx678_program_window(imx678, crop, binning); > > + if (ret) { > > + dev_err(&client->dev, "%s failed to set mode\n", __func__= ); > > + goto err_rpm_put; > > + } > > + > > + ret =3D __v4l2_ctrl_handler_setup(imx678->sd.ctrl_handler); > > + if (ret) { > > + dev_err(&client->dev, "%s failed to apply user values\n",= __func__); > > + goto err_rpm_put; > > + } > > + > > + cci_write(imx678->cci, IMX678_REG_MODE_SELECT, IMX678_MODE_STREAM= ING, &ret); > > + usleep_range(IMX678_STREAM_DELAY_US, IMX678_STREAM_DELAY_US + > > + IMX678_STREAM_DELAY_RANGE_US); > > + cci_write(imx678->cci, IMX678_REG_XMSTA, 0x00, &ret); > > + > > + if (ret) { > > + dev_err(&client->dev, "%s failed to start streaming\n", _= _func__); > > + goto err_rpm_put; > > + } > > + > > + return 0; > > + > > +err_rpm_put: > > + pm_runtime_put(&client->dev); > > + > > + return ret; > > +} > > + > > +static int imx678_disable_streams(struct v4l2_subdev *sd, > > + struct v4l2_subdev_state *state, > > + u32 pad, u64 mask) > > +{ > > + struct i2c_client *client =3D v4l2_get_subdevdata(sd); > > + struct imx678 *imx678 =3D to_imx678(sd); > > + int ret =3D 0; > > + > > + /* Master mode disable */ > > + cci_write(imx678->cci, IMX678_REG_XMSTA, 0x01, &ret); > > + /* Standby */ > > + cci_write(imx678->cci, IMX678_REG_MODE_SELECT, IMX678_MODE_STANDB= Y, &ret); > > + if (ret) > > + dev_err(&client->dev, "%s failed to stop stream\n", __fun= c__); > > + > > + pm_runtime_put(&client->dev); > > + > > + return ret; > > +} > > + > > +static int imx678_power_on(struct device *dev) > > +{ > > + struct i2c_client *client =3D to_i2c_client(dev); > > + struct v4l2_subdev *sd =3D i2c_get_clientdata(client); > > + struct imx678 *imx678 =3D to_imx678(sd); > > + int ret; > > + > > + ret =3D regulator_bulk_enable(ARRAY_SIZE(imx678_supply_name), imx= 678->supplies); > > + if (ret) { > > + dev_err(&client->dev, "%s: failed to enable regulators\n", > > + __func__); > > + return ret; > > + } > > + > > + fsleep(1); /* Tlow > 500ns */ > > + > > + gpiod_set_value_cansleep(imx678->reset_gpio, 0); > > + > > + fsleep(1); /* T3 > 1us */ > > + > > + ret =3D clk_prepare_enable(imx678->xclk); > > + if (ret) { > > + dev_err(&client->dev, "%s: failed to enable clock\n", > > + __func__); > > + goto reg_off; > > + } > > + > > + fsleep(20); /* T4 > 20us */ > > + > > + ret =3D imx678_write_common(imx678); > > + if (ret) { > > + dev_err(&client->dev, "%s failed to write registers\n", _= _func__); > > + goto clk_off; > > + } > > + > > + return 0; > > + > > +clk_off: > > + clk_disable_unprepare(imx678->xclk); >=20 > A newline here. >=20 > > +reg_off: > > + gpiod_set_value_cansleep(imx678->reset_gpio, 1); > > + regulator_bulk_disable(ARRAY_SIZE(imx678_supply_name), imx678->su= pplies); >=20 > Here, too. >=20 > Can you run >=20 > $ ./scripts/checkpatch.pl --strict --max-line-length=3D80 >=20 > on this? >=20 Ah alright, I thought it was 100. Will fix. > > + return ret; > > +} > > + > > +static int imx678_power_off(struct device *dev) > > +{ > > + struct i2c_client *client =3D to_i2c_client(dev); > > + struct v4l2_subdev *sd =3D i2c_get_clientdata(client); > > + struct imx678 *imx678 =3D to_imx678(sd); > > + > > + clk_disable_unprepare(imx678->xclk); > > + gpiod_set_value_cansleep(imx678->reset_gpio, 1); > > + regulator_bulk_disable(ARRAY_SIZE(imx678_supply_name), imx678->su= pplies); > > + > > + return 0; > > +} > > + > > +static int imx678_get_regulators(struct imx678 *imx678) > > +{ > > + struct i2c_client *client =3D v4l2_get_subdevdata(&imx678->sd); > > + unsigned int i; > > + > > + for (i =3D 0; i < ARRAY_SIZE(imx678_supply_name); i++) > > + imx678->supplies[i].supply =3D imx678_supply_name[i]; > > + > > + return devm_regulator_bulk_get(&client->dev, ARRAY_SIZE(imx678_su= pply_name), > > + imx678->supplies); >=20 > I'd just put these few lines into probe(). Up to you though. >=20 > > +} > > + > > +static int imx678_identify_model(struct imx678 *imx678) > > +{ > > + struct i2c_client *client =3D v4l2_get_subdevdata(&imx678->sd); > > + const struct imx678_model_info *info; > > + enum imx678_type detected; > > + int ret =3D 0; > > + u64 val =3D 0; > > + > > + info =3D of_device_get_match_data(&client->dev); >=20 > Please use device_get_match_data() instead. >=20 > Note that (theoretically at least) info could be NULL if the device isn't > instantiated from DT/ACPI. >=20 Ack. > > + > > + /* > > + * This sensor's ID registers become accessible 80ms after coming= out > > + * of STANDBY mode. > > + */ > > + cci_write(imx678->cci, IMX678_REG_MODE_SELECT, 0, &ret); > > + fsleep(IMX678_MODULE_ID_DELAY); > > + > > + cci_read(imx678->cci, IMX678_REG_MODULE_ID, &val, &ret); > > + > > + if (val !=3D IMX678_ID) { > > + dev_err(&client->dev, > > + "Chip ID mismatch: %x!=3D%llx\n", IMX678_ID, val); > > + return -ENXIO; > > + } > > + > > + cci_read(imx678->cci, IMX678_REG_MONOCHROME, &val, &ret); > > + > > + if (ret) { > > + dev_err(&client->dev, > > + "I2C transaction failed ret =3D %d\n", ret); > > + return ret; > > + } > > + > > + detected =3D val & IMX678_TYPE; > > + > > + if (info && detected !=3D info->type) > > + dev_err(&client->dev, > > + "sensor type mismatch: detected %s, DT specifies = %s; using DT value\n", > > + detected =3D=3D IMX678_MONOCHROME ? "mono" : "col= or", > > + info->type =3D=3D IMX678_MONOCHROME ? "mono" : "c= olor"); > > + > > + imx678->type =3D info ? info->type : detected; > > + > > + return 0; > > +} > > + > > +static const struct v4l2_subdev_core_ops imx678_core_ops =3D { > > + .subscribe_event =3D v4l2_ctrl_subdev_subscribe_event, > > + .unsubscribe_event =3D v4l2_event_subdev_unsubscribe, > > +}; > > + > > +static const struct v4l2_subdev_video_ops imx678_video_ops =3D { > > + .s_stream =3D v4l2_subdev_s_stream_helper, > > +}; > > + > > +static const struct v4l2_subdev_pad_ops imx678_pad_ops =3D { > > + .enum_mbus_code =3D imx678_enum_mbus_code, > > + .get_fmt =3D v4l2_subdev_get_fmt, > > + .set_fmt =3D imx678_set_pad_format, > > + .get_selection =3D imx678_get_selection, > > + .set_selection =3D imx678_set_selection, > > + .enum_frame_size =3D imx678_enum_frame_size, > > + .enable_streams =3D imx678_enable_streams, > > + .disable_streams =3D imx678_disable_streams, > > +}; > > + > > +static const struct v4l2_subdev_ops imx678_subdev_ops =3D { > > + .core =3D &imx678_core_ops, > > + .video =3D &imx678_video_ops, > > + .pad =3D &imx678_pad_ops, > > +}; > > + > > +static const struct v4l2_subdev_internal_ops imx678_internal_ops =3D { > > + .init_state =3D imx678_init_state, > > +}; > > + > > +static int imx678_init_controls(struct imx678 *imx678) > > +{ > > + struct v4l2_ctrl_handler *ctrl_hdlr; > > + const u32 hmax_4lane =3D min_hmax_4lane[__ffs(imx678->link_freq_b= itmap)]; > > + const u32 lane_scale =3D imx678->lane_mode =3D=3D IMX678_LANEMODE= _2L ? 2 : 1; > > + struct i2c_client *client =3D v4l2_get_subdevdata(&imx678->sd); > > + struct v4l2_fwnode_device_properties props; > > + s32 hblank, max_hblank; > > + u32 hmax; > > + int ret; > > + > > + ctrl_hdlr =3D &imx678->ctrl_handler; > > + ret =3D v4l2_ctrl_handler_init(ctrl_hdlr, 11); > > + if (ret) > > + return ret; > > + > > + imx678->vmax =3D IMX678_VMAX_DEFAULT; > > + hmax =3D hmax_4lane * lane_scale; > > + > > + /* PIXEL_RATE is fixed and read-only */ > > + imx678->pixel_rate =3D v4l2_ctrl_new_std(ctrl_hdlr, &imx678_ctrl_= ops, > > + V4L2_CID_PIXEL_RATE, > > + IMX678_PIXEL_RATE, > > + IMX678_PIXEL_RATE, 1, > > + IMX678_PIXEL_RATE); > > + > > + /* LINK_FREQ is also read only */ > > + imx678->link_freq =3D > > + v4l2_ctrl_new_int_menu(ctrl_hdlr, &imx678_ctrl_ops, > > + V4L2_CID_LINK_FREQ, > > + ARRAY_SIZE(link_freqs) - 1, > > + __ffs(imx678->link_freq_bitmap), > > + link_freqs); > > + > > + if (imx678->link_freq) > > + imx678->link_freq->flags |=3D V4L2_CTRL_FLAG_READ_ONLY; > > + > > + imx678->vblank =3D v4l2_ctrl_new_std(ctrl_hdlr, &imx678_ctrl_ops,= V4L2_CID_VBLANK, > > + imx678->vmax - imx678_active_a= rea.height, > > + IMX678_VMAX_MAX - imx678_activ= e_area.height, 2, > > + imx678->vmax - imx678_active_a= rea.height); > > + > > + hblank =3D hmax * IMX678_PIX_PER_CLK - imx678_active_area.width; > > + max_hblank =3D IMX678_HMAX_MAX * IMX678_PIX_PER_CLK - imx678_acti= ve_area.width; > > + imx678->hblank =3D v4l2_ctrl_new_std(ctrl_hdlr, &imx678_ctrl_ops,= V4L2_CID_HBLANK, > > + hblank, max_hblank, IMX678_PIX= _PER_CLK, hblank); > > + > > + imx678->exposure =3D v4l2_ctrl_new_std(ctrl_hdlr, &imx678_ctrl_op= s, > > + V4L2_CID_EXPOSURE, > > + IMX678_EXPOSURE_MIN, > > + IMX678_VMAX_DEFAULT - > > + IMX678_SHR_MIN, > > + IMX678_EXPOSURE_STEP, > > + IMX678_EXPOSURE_DEFAULT); > > + > > + imx678->gain =3D v4l2_ctrl_new_std(ctrl_hdlr, &imx678_ctrl_ops, V= 4L2_CID_ANALOGUE_GAIN, > > + IMX678_ANA_GAIN_MIN_NORMAL, IMX6= 78_ANA_GAIN_MAX_NORMAL, > > + IMX678_ANA_GAIN_STEP, IMX678_ANA= _GAIN_DEFAULT); > > + > > + imx678->hflip =3D v4l2_ctrl_new_std(ctrl_hdlr, &imx678_ctrl_ops, = V4L2_CID_HFLIP, 0, 1, 1, 0); > > + imx678->vflip =3D v4l2_ctrl_new_std(ctrl_hdlr, &imx678_ctrl_ops, = V4L2_CID_VFLIP, 0, 1, 1, 0); > > + > > + v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx678_ctrl_ops, V4L2_CI= D_TEST_PATTERN, > > + ARRAY_SIZE(imx678_tpg_menu) - 1, 0, = 0, > > + imx678_tpg_menu); > > + > > + if (ctrl_hdlr->error) { > > + ret =3D ctrl_hdlr->error; > > + dev_err(&client->dev, "%s control init failed (%d)\n", > > + __func__, ret); > > + goto error; >=20 > You can omit doing this here; just call v4l2_ctrl_new_fwnode_properties() > and check for errors after that. >=20 > > + } > > + > > + ret =3D v4l2_fwnode_device_parse(&client->dev, &props); > > + if (ret) > > + goto error; >=20 > Do this first and you can simplify error handling. >=20 Ack. > > + > > + ret =3D v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx678_ctrl_o= ps, &props); > > + if (ret) > > + goto error; > > + > > + imx678->sd.ctrl_handler =3D ctrl_hdlr; > > + > > + return 0; > > + > > +error: > > + v4l2_ctrl_handler_free(ctrl_hdlr); > > + > > + return ret; > > +} > > + > > +static void imx678_free_controls(struct imx678 *imx678) > > +{ > > + v4l2_ctrl_handler_free(imx678->sd.ctrl_handler); >=20 > I'm not sure having a function for this is useful. >=20 Ack. > > +} > > + > > +static int imx678_check_hwcfg(struct device *dev, struct imx678 *imx67= 8) > > +{ > > + struct fwnode_handle *endpoint; > > + struct v4l2_fwnode_endpoint ep_cfg =3D { > > + .bus_type =3D V4L2_MBUS_CSI2_DPHY > > + }; > > + int ret =3D -EINVAL; > > + > > + endpoint =3D fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL= ); >=20 > Please use fwnode_graph_get_endpoint_by_id(). >=20 Ack. Thanks, Jai > > + if (!endpoint) { > > + dev_err(dev, "endpoint node not found\n"); > > + return -EINVAL; > > + } > > + > > + if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg)) { > > + dev_err(dev, "could not parse endpoint\n"); > > + goto error_out; > > + } > > + > > + switch (ep_cfg.bus.mipi_csi2.num_data_lanes) { > > + case 2: > > + imx678->lane_mode =3D IMX678_LANEMODE_2L; > > + break; > > + case 4: > > + imx678->lane_mode =3D IMX678_LANEMODE_4L; > > + break; > > + default: > > + dev_err(dev, > > + "only 2 or 4 CSI2 data lanes are currently suppor= ted\n"); > > + goto error_out; > > + } > > + > > + ret =3D v4l2_link_freq_to_bitmap(dev, ep_cfg.link_frequencies, > > + ep_cfg.nr_of_link_frequencies, > > + link_freqs, ARRAY_SIZE(link_freqs), > > + &imx678->link_freq_bitmap); > > + > > +error_out: > > + v4l2_fwnode_endpoint_free(&ep_cfg); > > + fwnode_handle_put(endpoint); > > + > > + return ret; > > +} > > + > > +static int imx678_probe(struct i2c_client *client) > > +{ > > + struct device *dev =3D &client->dev; > > + struct imx678 *imx678; > > + int ret, i; > > + > > + imx678 =3D devm_kzalloc(&client->dev, sizeof(*imx678), GFP_KERNEL= ); > > + if (!imx678) > > + return -ENOMEM; > > + > > + v4l2_i2c_subdev_init(&imx678->sd, client, &imx678_subdev_ops); > > + > > + imx678->cci =3D devm_cci_regmap_init_i2c(client, 16); > > + if (IS_ERR(imx678->cci)) > > + return dev_err_probe(dev, PTR_ERR(imx678->cci), > > + "failed to init CCI\n"); > > + > > + if (imx678_check_hwcfg(dev, imx678)) > > + return -EINVAL; > > + > > + imx678->xclk =3D devm_v4l2_sensor_clk_get(dev, NULL); > > + if (IS_ERR(imx678->xclk)) > > + return dev_err_probe(dev, PTR_ERR(imx678->xclk), > > + "failed to get xclk\n"); > > + > > + imx678->xclk_freq =3D clk_get_rate(imx678->xclk); > > + > > + for (i =3D 0; i < ARRAY_SIZE(imx678_inck_table); ++i) { > > + if (imx678_inck_table[i].xclk_hz =3D=3D imx678->xclk_freq= ) { > > + imx678->inck_sel_val =3D imx678_inck_table[i].inc= k_sel; > > + break; > > + } > > + } > > + > > + if (i =3D=3D ARRAY_SIZE(imx678_inck_table)) > > + return dev_err_probe(dev, -EINVAL, > > + "unsupported XCLK rate %u Hz\n", > > + imx678->xclk_freq); > > + > > + ret =3D imx678_get_regulators(imx678); > > + if (ret) > > + return dev_err_probe(dev, ret, "failed to get regulators\= n"); > > + > > + imx678->reset_gpio =3D devm_gpiod_get_optional(dev, "reset", > > + GPIOD_OUT_HIGH); > > + if (IS_ERR(imx678->reset_gpio)) > > + return dev_err_probe(dev, PTR_ERR(imx678->reset_gpio), > > + "failed to get reset GPIO\n"); > > + > > + ret =3D imx678_power_on(dev); > > + if (ret) > > + return ret; > > + > > + ret =3D imx678_identify_model(imx678); > > + if (ret) > > + goto error_power_off; > > + > > + pm_runtime_set_active(dev); > > + pm_runtime_enable(dev); > > + > > + ret =3D imx678_init_controls(imx678); > > + if (ret) > > + goto error_pm_runtime; > > + > > + imx678->sd.internal_ops =3D &imx678_internal_ops; > > + imx678->sd.flags |=3D V4L2_SUBDEV_FL_HAS_DEVNODE | > > + V4L2_SUBDEV_FL_HAS_EVENTS; > > + imx678->sd.entity.function =3D MEDIA_ENT_F_CAM_SENSOR; > > + > > + imx678->pad.flags =3D MEDIA_PAD_FL_SOURCE; > > + > > + ret =3D media_entity_pads_init(&imx678->sd.entity, 1, &imx678->pa= d); > > + if (ret) { > > + dev_err(dev, "failed to init entity pads: %d\n", ret); > > + goto error_handler_free; > > + } > > + > > + imx678->sd.state_lock =3D imx678->ctrl_handler.lock; > > + ret =3D v4l2_subdev_init_finalize(&imx678->sd); > > + if (ret < 0) { > > + dev_err(dev, "subdev init error\n"); > > + goto error_media_entity; > > + } > > + > > + ret =3D v4l2_async_register_subdev_sensor(&imx678->sd); > > + if (ret < 0) { > > + dev_err(dev, "failed to register sensor sub-device: %d\n"= , ret); > > + goto error_subdev_cleanup; > > + } > > + > > + pm_runtime_idle(dev); > > + > > + return 0; > > + > > +error_subdev_cleanup: > > + v4l2_subdev_cleanup(&imx678->sd); > > + > > +error_media_entity: > > + media_entity_cleanup(&imx678->sd.entity); > > + > > +error_handler_free: > > + imx678_free_controls(imx678); > > + > > +error_pm_runtime: > > + pm_runtime_disable(&client->dev); > > + pm_runtime_set_suspended(&client->dev); > > + > > +error_power_off: > > + imx678_power_off(&client->dev); > > + > > + return ret; > > +} > > + > > +static void imx678_remove(struct i2c_client *client) > > +{ > > + struct v4l2_subdev *sd =3D i2c_get_clientdata(client); > > + struct imx678 *imx678 =3D to_imx678(sd); > > + > > + v4l2_async_unregister_subdev(sd); > > + v4l2_subdev_cleanup(sd); > > + media_entity_cleanup(&sd->entity); > > + imx678_free_controls(imx678); > > + > > + pm_runtime_disable(&client->dev); > > + if (!pm_runtime_status_suspended(&client->dev)) > > + imx678_power_off(&client->dev); > > + pm_runtime_set_suspended(&client->dev); > > +} > > + > > +static const struct dev_pm_ops imx678_pm_ops =3D { > > + SET_RUNTIME_PM_OPS(imx678_power_off, imx678_power_on, NULL) > > +}; > > + > > +static const struct of_device_id imx678_of_match[] =3D { > > + { .compatible =3D "sony,imx678" }, > > + { .compatible =3D "sony,imx678-aamr", .data =3D &imx678_aamr_info= }, > > + { .compatible =3D "sony,imx678-aaqr", .data =3D &imx678_aaqr_info= }, > > + { /* sentinel */ } > > +}; > > + > > +MODULE_DEVICE_TABLE(of, imx678_of_match); > > + > > +static struct i2c_driver imx678_i2c_driver =3D { > > + .driver =3D { > > + .name =3D "imx678", > > + .of_match_table =3D imx678_of_match, > > + .pm =3D &imx678_pm_ops, > > + }, > > + .probe =3D imx678_probe, > > + .remove =3D imx678_remove, > > +}; > > + > > +module_i2c_driver(imx678_i2c_driver); > > + > > +MODULE_AUTHOR("Will Whang "); > > +MODULE_AUTHOR("Tetsuya NOMURA "); > > +MODULE_AUTHOR("Jai Luthra "); > > +MODULE_DESCRIPTION("Sony imx678 sensor driver"); > > +MODULE_LICENSE("GPL"); >=20 > --=20 > Kind regards, >=20 > Sakari Ailus