From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: Re: [PATCH 00/13] mmc: dw_mmc: cleans the codes for dwmmc controller Date: Wed, 09 Nov 2016 19:55:21 +0100 Message-ID: <1862686.MpoeR9Brjy@phil> References: <20161103062135.10697-1-jh80.chung@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <20161103062135.10697-1-jh80.chung@samsung.com> Sender: linux-kernel-owner@vger.kernel.org To: Jaehoon Chung Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, linux-rockchip@lists.infradead.org, ulf.hansson@linaro.org, robh+dt@kernel.org, krzk@kernel.org, shawn.lin@rock-chips.com List-Id: devicetree@vger.kernel.org Am Donnerstag, 3. November 2016, 15:21:22 CET schrieb Jaehoon Chung: > This patchset is modified the some minor fixing and cleaning code. > If needs to split the patches, i will re-send the patches. > > * Major changes > - Use the cookie enum values like sdhci controller. > - Remove the unnecessary codes and use stop_abort() by default. > - Remove the obsoleted property "supports-highspeed" > - Remove the "clock-freq-min-max" property. Instead, use "max-frequency" > - Minimum clock value is set to 100K by default. > > Jaehoon Chung (13): > mmc: dw_mmc: display the real register value on debugfs > mmc: dw_mmc: fix the debug message for checking card's present > mmc: dw_mmc: change the DW_MCI_FREQ_MIN from 400K to 100K > mmc: dw_mmc: use the hold register when send stop command > mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default > mmc: core: move the cookie's enum values from sdhci.h to mmc.h > mmc: dw_mmc: use the cookie's enum values for post/pre_req() > mmc: dw_mmc: remove the unnecessary mmc_data structure patches 1-8 on rk3036, rk3288, rk3368 and rk3399 Rockchip platforms Tested-by: Heiko Stuebner