Re: [PATCH v3 1/4] dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Niklas,

Thank you for the patch.

On Friday, 2 November 2018 18:00:06 EET Niklas Söderlund wrote:
> The CSI-2 transmitters can use a different number of lanes to transmit
> data. Make the data-lanes mandatory for the endpoints that describe the
> transmitters as no good default can be set to fallback on.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> 
> ---
> * Changes since v2
> - Update paragraph according to Laurents comments.
> ---
>  Documentation/devicetree/bindings/media/i2c/adv748x.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index
> 5dddc95f9cc46084..bffbabc879efd86c 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
> @@ -48,7 +48,9 @@ are numbered as follows.
>  	  TXA		source		10
>  	  TXB		source		11
> 
> -The digital output port nodes must contain at least one endpoint.
> +The digital output port nodes, when present, shall contain at least one
> +endpoint. Each of those endpoints shall contain the data-lanes property as
> +described in video-interfaces.txt.
> 
>  Ports are optional if they are not connected to anything at the hardware
> level.


-- 
Regards,

Laurent Pinchart