From: Adrian Hunter <adrian.hunter@intel.com>
To: Vadym Kochan <vadym.kochan@plvision.eu>,
Hu Ziji <huziji@marvell.com>,
Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Elad Nachman <enachman@marvell.com>,
Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: Re: [PATCH v3 3/3] mmc: xenon: Fix 2G limitation on AC5 SoC
Date: Fri, 9 Dec 2022 09:23:05 +0200 [thread overview]
Message-ID: <18cf4197-adce-3e47-7802-80b0d078368b@intel.com> (raw)
In-Reply-To: <20221205105931.410686-4-vadym.kochan@plvision.eu>
On 5/12/22 12:59, Vadym Kochan wrote:
> There is a limitation on AC5 SoC that mmc controller
> can't have DMA access over 2G memory, so use SDMA with
> a bounce buffer. Swiotlb can't help because on arm64 arch
> it reserves memblock's at the end of the memory.
>
> Additionally set mask to 34 bit since on AC5 SoC RAM starts
> at 0x2_00000000.
Can you explain more about how a 34-bit DMA mask works when
SDMA only supports 32-bit addresses?
>
> Co-developed-by: Elad Nachman <enachman@marvell.com>
> Signed-off-by: Elad Nachman <enachman@marvell.com>
> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
> ---
> drivers/mmc/host/sdhci-xenon.c | 38 ++++++++++++++++++++++++++++++++++
> drivers/mmc/host/sdhci-xenon.h | 3 ++-
> 2 files changed, 40 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index 08e838400b52..5f3db0425674 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -13,7 +13,9 @@
>
> #include <linux/acpi.h>
> #include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> #include <linux/ktime.h>
> +#include <linux/mm.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/pm.h>
> @@ -253,6 +255,22 @@ static unsigned int xenon_get_max_clock(struct sdhci_host *host)
> return pltfm_host->clock;
> }
>
> +static int xenon_set_dma_mask(struct sdhci_host *host)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + struct mmc_host *mmc = host->mmc;
> + struct device *dev = mmc_dev(mmc);
> +
> + if (priv->hw_version == XENON_AC5) {
> + host->flags &= ~SDHCI_USE_64_BIT_DMA;
> +
> + return dma_set_mask_and_coherent(dev, DMA_BIT_MASK(34));
> + }
> +
> + return sdhci_set_dma_mask(host);
> +}
> +
> static const struct sdhci_ops sdhci_xenon_ops = {
> .voltage_switch = xenon_voltage_switch,
> .set_clock = sdhci_set_clock,
> @@ -261,6 +279,7 @@ static const struct sdhci_ops sdhci_xenon_ops = {
> .reset = xenon_reset,
> .set_uhs_signaling = xenon_set_uhs_signaling,
> .get_max_clock = xenon_get_max_clock,
> + .set_dma_mask = xenon_set_dma_mask,
> };
>
> static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
> @@ -486,6 +505,18 @@ static void xenon_sdhc_unprepare(struct sdhci_host *host)
> xenon_disable_sdhc(host, sdhc_id);
> }
>
> +static int xenon_ac5_probe(struct sdhci_host *host)
> +{
> + struct sysinfo si;
> +
> + si_meminfo(&si);
> +
> + if ((si.totalram * si.mem_unit) > SZ_2G)
> + host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
> +
> + return 0;
> +}
> +
> static int xenon_probe(struct platform_device *pdev)
> {
> struct sdhci_pltfm_host *pltfm_host;
> @@ -533,6 +564,12 @@ static int xenon_probe(struct platform_device *pdev)
> }
> }
>
> + if (priv->hw_version == XENON_AC5) {
> + err = xenon_ac5_probe(host);
> + if (err)
> + goto err_clk_axi;
> + }
> +
> err = mmc_of_parse(host->mmc);
> if (err)
> goto err_clk_axi;
> @@ -682,6 +719,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = {
> { .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
> { .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110},
> { .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700},
> + { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AC5},
> {}
> };
> MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
> index 3e9c6c908a79..0460d97aad26 100644
> --- a/drivers/mmc/host/sdhci-xenon.h
> +++ b/drivers/mmc/host/sdhci-xenon.h
> @@ -57,7 +57,8 @@ enum xenon_variant {
> XENON_A3700,
> XENON_AP806,
> XENON_AP807,
> - XENON_CP110
> + XENON_CP110,
> + XENON_AC5
> };
>
> struct xenon_priv {
next prev parent reply other threads:[~2022-12-09 7:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-05 10:59 [PATCH v3 0/3] mmc: xenon: Fix 2G DMA limitation on AC5 SoC Vadym Kochan
2022-12-05 10:59 ` [PATCH v3 1/3] dt-bindings: mmc: xenon: Add compatible string for " Vadym Kochan
2022-12-05 13:28 ` Krzysztof Kozlowski
2022-12-05 10:59 ` [PATCH v3 2/3] mmc: sdhci: Export sdhci_set_dma_mask to be used by the drivers Vadym Kochan
2022-12-05 10:59 ` [PATCH v3 3/3] mmc: xenon: Fix 2G limitation on AC5 SoC Vadym Kochan
2022-12-07 13:40 ` Linus Walleij
2022-12-08 10:19 ` [EXT] " Elad Nachman
2022-12-08 21:35 ` Linus Walleij
2022-12-09 7:23 ` Adrian Hunter [this message]
2022-12-09 11:39 ` Vadym Kochan
2022-12-09 11:53 ` Adrian Hunter
2022-12-09 12:10 ` Vadym Kochan
2022-12-09 12:13 ` Adrian Hunter
2022-12-09 13:27 ` Vadym Kochan
2022-12-12 8:42 ` Adrian Hunter
2022-12-12 11:34 ` Vadym Kochan
2022-12-12 13:13 ` Adrian Hunter
2022-12-13 9:22 ` Linus Walleij
2022-12-13 9:16 ` Linus Walleij
2022-12-13 9:21 ` Vadym Kochan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18cf4197-adce-3e47-7802-80b0d078368b@intel.com \
--to=adrian.hunter@intel.com \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=devicetree@vger.kernel.org \
--cc=enachman@marvell.com \
--cc=huziji@marvell.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vadym.kochan@plvision.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox