Re: [PATCH v4 4/9] staging:iio:ad7780: add chip ID values and mask

["Ardelean, Alexandru" <Alex.Ardelean@analog.com>]

On Thu, 2019-02-28 at 11:24 -0300, Renato Lui Geh wrote:
> 
> 
> The ad7780 supports both the ad778x and ad717x families. Each chip has
> a corresponding ID. This patch provides a mask for extracting ID values
> from the status bits and also macros for the correct values for the
> ad7170, ad7171, ad7780 and ad7781.
> 
> Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
> ---
>  drivers/staging/iio/adc/ad7780.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/ad7780.c
> b/drivers/staging/iio/adc/ad7780.c
> index 56c49e28f432..ad7617a3a141 100644
> --- a/drivers/staging/iio/adc/ad7780.c
> +++ b/drivers/staging/iio/adc/ad7780.c
> @@ -26,10 +26,14 @@
>  #define AD7780_RDY             BIT(7)
>  #define AD7780_FILTER          BIT(6)
>  #define AD7780_ERR             BIT(5)
> -#define AD7780_ID1             BIT(4)
> -#define AD7780_ID0             BIT(3)
>  #define AD7780_GAIN            BIT(2)
> 
> +#define AD7170_ID              0
> +#define AD7171_ID              1
> +#define AD7780_ID              1
> +#define AD7781_ID              0
> +
> +#define AD7780_ID_MASK         (BIT(3) | BIT(4))

This also doesn't have any functionality change.
The AD7170_ID, AD7171_ID, AD7780_ID & AD7781_ID IDs are also unused (maybe
in a later patch they are ?).

I would also leave the AD7780_ID1 & AD7780_ID0 definitions in place, since
they're easier matched with the datasheet.

> 
>  #define AD7780_PATTERN_GOOD    1
>  #define AD7780_PATTERN_MASK    GENMASK(1, 0)
> --
> 2.21.0
>