From: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
To: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>,
Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/7] ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations
Date: Sun, 2 Aug 2026 14:08:37 +0100 [thread overview]
Message-ID: <192088d6-a50f-4eaa-9aeb-41db6d2a2126@oss.qualcomm.com> (raw)
In-Reply-To: <20260801054610.4047089-3-prasad.kumpatla@oss.qualcomm.com>
On 8/1/26 6:46 AM, Prasad Kumpatla wrote:
> Add TDM DAI operations to q6apm-lpass-dais so AudioReach TDM
> backends can be configured through the normal ASoC hw_params and DAI
> setup flow.
>
> The TDM set_tdm_slot() callback validates the supported slot width and
> slot count, stores the active slot mask in the AudioReach module
> configuration, and leaves existing DMA, I2S and HDMI paths unchanged.
>
> Reuse the existing LPASS child-clock handling for TDM nodes as well as
> MI2S nodes, since TDM backends also request optional backend clocks
> through the machine driver set_sysclk() path.
>
> Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
> ---
lgtm,
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
--srini
> sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 60 +++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
>
> diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> index e68e8b000e07..e204fd59e512 100644
> --- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> +++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> @@ -358,6 +358,53 @@ static int q6i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> return 0;
> }
>
> +static int q6tdm_set_tdm_slot(struct snd_soc_dai *dai,
> + unsigned int tx_mask,
> + unsigned int rx_mask,
> + int slots, int slot_width)
> +{
> + struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
> + struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
> + unsigned int cap_mask, slot_mask;
> +
> + if (slot_width != 16 && slot_width != 32) {
> + dev_err(dai->dev, "%s: invalid slot_width %d\n", __func__, slot_width);
> + return -EINVAL;
> + }
> +
> + switch (slots) {
> + case 2:
> + case 4:
> + case 8:
> + case 16:
> + cap_mask = GENMASK(slots - 1, 0);
> + break;
> + default:
> + dev_err(dai->dev, "%s: invalid slots %d\n", __func__, slots);
> + return -EINVAL;
> + }
> +
> + switch (dai->id) {
> + case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
> + slot_mask = (dai->id & 0x1) ? tx_mask : rx_mask;
> + if (slot_mask & ~cap_mask) {
> + dev_err(dai->dev, "%s: invalid slot mask 0x%x for %d slots\n",
> + __func__, slot_mask, slots);
> + return -EINVAL;
> + }
> +
> + cfg->nslots_per_frame = slots;
> + cfg->slot_width = slot_width;
> + cfg->slot_mask = slot_mask;
> + break;
> + default:
> + dev_err(dai->dev, "%s: invalid dai id 0x%x\n", __func__, dai->id);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static const struct snd_soc_dai_ops q6dma_ops = {
> .prepare = q6apm_lpass_dai_prepare,
> .startup = q6apm_lpass_dai_startup,
> @@ -387,6 +434,17 @@ static const struct snd_soc_dai_ops q6hdmi_ops = {
> .trigger = q6apm_lpass_dai_trigger,
> };
>
> +static const struct snd_soc_dai_ops q6tdm_ops = {
> + .prepare = q6apm_lpass_dai_prepare,
> + .startup = q6apm_lpass_dai_startup,
> + .shutdown = q6i2s_lpass_dai_shutdown,
> + .set_tdm_slot = q6tdm_set_tdm_slot,
> + .hw_params = q6dma_hw_params,
> + .set_fmt = q6i2s_set_fmt,
> + .set_sysclk = q6i2s_set_sysclk,
> + .trigger = q6apm_lpass_dai_trigger,
> +};
> +
> static const struct snd_soc_component_driver q6apm_lpass_dai_component = {
> .name = "q6apm-be-dai-component",
> .of_xlate_dai_name = q6dsp_audio_ports_of_xlate_dai_name,
> @@ -415,6 +473,7 @@ static int of_q6apm_parse_dai_data(struct device *dev,
> case PRIMARY_MI2S_RX ... QUATERNARY_MI2S_TX:
> case QUINARY_MI2S_RX ... QUINARY_MI2S_TX:
> case SENARY_MI2S_RX ... SENARY_MI2S_TX:
> + case PRIMARY_TDM_RX_0 ... QUINARY_TDM_TX_7:
> priv = &data->priv[id];
> priv->mclk = of_clk_get_by_name(node, "mclk");
> if (IS_ERR(priv->mclk)) {
> @@ -479,6 +538,7 @@ static int q6apm_lpass_dai_dev_probe(struct platform_device *pdev)
> cfg.q6i2s_ops = &q6i2s_ops;
> cfg.q6dma_ops = &q6dma_ops;
> cfg.q6hdmi_ops = &q6hdmi_ops;
> + cfg.q6tdm_ops = &q6tdm_ops;
> dais = q6dsp_audio_ports_set_config(dev, &cfg, &num_dais);
>
> return devm_snd_soc_register_component(dev, &q6apm_lpass_dai_component, dais, num_dais);
next prev parent reply other threads:[~2026-08-02 13:08 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-01 5:46 [PATCH v5 0/7] ASoC: qcom: add AudioReach TDM backend support Prasad Kumpatla
2026-08-01 5:46 ` [PATCH v5 1/7] ASoC: qcom: qdsp6: add topology-driven Audio IF support Prasad Kumpatla
2026-08-02 12:59 ` Srinivas Kandagatla
2026-08-01 5:46 ` [PATCH v5 2/7] ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations Prasad Kumpatla
2026-08-02 13:08 ` Srinivas Kandagatla [this message]
2026-08-01 5:46 ` [PATCH v5 3/7] dt-bindings: sound: qcom,q6dsp-lpass-ports: add Audio IF clocks Prasad Kumpatla
2026-08-02 13:30 ` Srinivas Kandagatla
2026-08-01 5:46 ` [PATCH v5 4/7] ASoC: qcom: q6prm: add Audio IF clock IDs Prasad Kumpatla
2026-08-01 5:46 ` [PATCH v5 5/7] dt-bindings: sound: qcom,sm8250: allow TDM slot properties Prasad Kumpatla
2026-08-01 5:46 ` [PATCH v5 6/7] ASoC: qcom: common: add DAI-node TDM slot helpers Prasad Kumpatla
2026-08-01 5:57 ` sashiko-bot
2026-08-01 5:46 ` [PATCH v5 7/7] ASoC: qcom: sc8280xp: add TDM hw_params support Prasad Kumpatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=192088d6-a50f-4eaa-9aeb-41db6d2a2126@oss.qualcomm.com \
--to=srinivas.kandagatla@oss.qualcomm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=prasad.kumpatla@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox