From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: Re: [PATCH v2 2/4] dt-bindings: phy: Add a new property drive-impedance-ohm for RK's emmc PHY Date: Tue, 12 Mar 2019 13:52:39 +0100 Message-ID: <1924357.CMCVK5N5Qd@phil> References: <20190307084159.25236-1-christoph.muellner@theobroma-systems.com> <20190307084159.25236-2-christoph.muellner@theobroma-systems.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <20190307084159.25236-2-christoph.muellner@theobroma-systems.com> Sender: linux-kernel-owner@vger.kernel.org To: Christoph Muellner Cc: robh+dt@kernel.org, mark.rutland@arm.com, shawn.lin@rock-chips.com, Philipp Tomsich , Kishon Vijay Abraham I , Brian Norris , Klaus Goger , Enric Balletbo i Serra , Douglas Anderson , Viresh Kumar , Ezequiel Garcia , Lin Huang , Randy Li , Tony Xie , Vicente Bergas , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org List-Id: devicetree@vger.kernel.org Hi Christoph, Am Donnerstag, 7. März 2019, 09:41:54 CET schrieb Christoph Muellner: > This patch documents the new proprty drive-impedance-ohm for > Rockchip's eMMC PHY node. > > Signed-off-by: Christoph Muellner > Signed-off-by: Philipp Tomsich > --- > Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt > index e3ea55763b0a..5f5d999dacc3 100644 > --- a/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt > +++ b/Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt > @@ -13,6 +13,9 @@ specified by name: you might want to adapt the section headline as well, as right now it talks about "Optional clocks", but should likely become the generic "Optional properties" as in other bindings (including moving the clock- binding.txt reference down into the clock elements) Heiko > (because most boards can get basic functionality without having > access to it), it is strongly suggested. > - clocks: Should have a phandle to the card clock exported by the SDHCI driver. > + - drive-impedance-ohm: Specifies the drive impedance in Ohm. > + Possible values are 33, 40, 50, 66 and 100. > + If not set, the default value of 50 will be applied. > > Example: > >